Spray dryer processed graphene oxide/reduced graphene oxide for high-performance supercapacitor

This study deals with the utility of mini spray dryer process to improve the dispersibility, of graphene oxide(GO) and its application for high-performance supercapacitor. Initially, the neutral solution of GO was obtained using the modified Hummer's method. After this, the prepared GO solution was processed by mini spray dryer to obtain a more purified, lighter, and dispersed form of GO which is named as spray dryer processed GO (SPGO). The SPGO thus obtained showed excellent dispersibility behavior with various solvents, which is not found in case of conventional oven drying. Furthermore, utility of SPGO and its reduced form (r-SPGO) for supercapacitor applications have been investigated. Results obtained from the cyclic voltammetry(CV) analysis, impedance, and charge-discharge behavior of supercapacitor fabricated using r-SPGO shows enhanced features. Therefore, the simple spray dried GO and its reduced form, that is, r-SPGO can be utilized as a potential candidate for the supercapacitor application. Herein, as synthesized SPGO exhibited the specific capacitance of 12.07 and 37.6 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively, at a scan rate of 5 mV/s. On the other hand, reduced form of SPGO, that is, r-SPGO showed the specific capacitance of 27.16 and 230 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively.     

Facile synthesis of asymmetric patchy Janus Ag/Cu particles and study of their antifungal activity

Asymmetric patchy Ag/Cu Janus nanoparticles (NPs) were synthesized via a “seed-mediated” approach. This is the first report of synthesis of nanometer sized metal-based Janus NPs without using complicated methods. Selective adsorption of the surfactant onto the seed NPs leads to the formation of Janus type structure. Subsequently the reduction potential of Ag⁺/Ag⁰ and Cu²⁺/Cu⁰ systems directs the formation of the “patch”. The patchy Janus NPs show significant antifungal activity towards a potent rice pathogen thus offering the prospect of future application in crop protection.     

Particle size reduction of RDX by sequential application of solvent–antisolvent recrystallization and mechanical methods

ABSTRACT

Solvent–antisolvent recrystallization produced ~8 µm average size RDX particles (UF-RDX) that were subsequently subjected to mechanical methods of ultrasonication and ball-milling to find further achievable reduction in particle size. Long duration ultrasonication for 20 h and 300 rpm ball milling for 4 h of UF-RDX decreased its average particle size to ~2 µm. RDX produced by all the three processes (solvent–antisolvent recrystallization, ultrasonication and ball-milling) was similar to coarser RDX in structure and thermal decomposition behavior. However, UF-RDX produced by solvent–antisolvent recrystallization was significantly less impact sensitive than that produced by ball-milling and ultrasonication. The issues of residual solvent and the metal contamination during RDX processing were addressed by process parameter optimization. Solvent–antisolvent recrystallization and mechanical methods even when used sequentially could not bring average particle size of RDX to nano-scale.     

Poly(N-vinylpyrrolidone)-stabilized colloidal graphene-reinforced poly(ethylene-co-methyl acrylate) to mitigate electromagnetic radiation pollution

Polymer Bulletin - Electrically conducting flexible polymeric nanocomposite has been fabricated through wet mixing method where conducting inclusion was acoustically exfoliated pristine graphene...     

New pseudo-dynamic analysis of two-layered cohesive-friction soil slope and its numerical validation

Natural slopes consist of non-homogeneous soil profiles with distinct characteristics from slopes made of homogeneous soil. In this study, the limit equilibrium modified pseudo-dynamic method is used to analyze the stability of two-layered c-φ soil slopes in which the failure surface is assumed to be a logarithmic spiral. The zero-stress boundary condition at the ground surface under the seismic loading condition is satisfied. New formulations derived from an analytical method are proposed for the predicting the seismic response in two-layered soil. A detailed parametric study was performed in which various parameters (seismic accelerations, damping, cohesion, and angle of internal friction) were varied. The results of the present method were compared with those in the available literature. The present analytical analysis was also verified against the finite element analysis results.     

PDMS microfluidics: A mini review

Polydimethylsiloxane (PDMS) is hailed as one of the foundational materials for microfluidics. Though a silicone-based elastomer of many desirable properties, the emergence of microfluidic fabrication techniques, especially soft lithography, has elevated its status to an exceptional one. In this mini review, we look at the salient aspects that make PDMS so special in achieving such a coveted status in the microfluidics community. A methodical approach is followed to touch upon the application of PDMS in various aspects of microfluidics with the advantages, limitations, and some future directions. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48958.     

Dielectric relaxation and conduction mechanism of complex perovskite Ca0.90Sr0.10Cu3Ti3.95Zn0.05O12 ceramic

In this work, Sr and Zn co-doped calcium copper titanate having nominal formula Ca_0.90Sr_0.10Cu₃Ti_3.95Zn_0.05O₁₂ has been synthesized and systematically studied for structure, dielectric and electrical properties. The phase purity of the prepared composition has been confirmed by X-ray diffraction (XRD) pattern and various structural parameters are presented here with Rietveld refinement data. The Scanning electron microscopy (SEM) image revealed the presence of homogeneous fine-grained microstructure investigated in the prepared ceramic. The impedance data well fitted with 2 R-CPE model confirmed the non-ideality of the system. Dielectric studies have shown the existence of two relaxation processes in low and high frequency domains. Low frequency dielectric response proposed as a combination of Maxwell-Wagner relaxation and intrinsic defect (V_o⁺⁺) while high frequency behavior has been interpreted in terms of polaronic relaxation caused by hopping process of an electron between Ti³⁺ and Ti⁴⁺ states. The frequency dependent behavior of conductivity has been well fitted to Dong’s model and interpreted in term of Overlapping Large Polaron Tunneling (OLPT) mechanism. The various parameters; relaxation angular frequency (ω₁) of Debye process, ionic hopping frequency (ω₂₎, dc conductivity (σ_o), cole- cole parameter (α) and frequency exponent (s) have been determined by Dong’s Model fitting.     

Double emulsion‐encapsulated guggul exhibits improved in vivo hypocholesterolaemic action in rats

Guggul tree or Commiphora mukul is a small thorny herb having remarkable hypocholesterolaemic properties. Its therapeutic effects are because of its biocomponent guggulsterones, especially guggulsterone E and Z. In this research, double emulsion‐based spread was tried to improve the bioavailability of the herb guggul in in vivo rat model. The effect of the different diets with encapsulated and nonencapsulated guggul was evaluated and compared after 6 weeks, based on the final body weight and analysis of organs, serum and faeces of normal and hypercholesterolaemic (H) rats. It was evident from the results that double emulsion‐encapsulated guggul showed better control on weight of H rats (25.98% lower), inhibition of HMG CoA reductase (3.95 times less) activity and reduction in atherosclerotic index (47.2%), as compared to diet with unencapsulated guggul. Encapsulation of guggul also improved faecal excretion of bile acids, lipids and total cholesterol in H and normal rats.