Spray dryer processed graphene oxide/reduced graphene oxide for high-performance supercapacitor

This study deals with the utility of mini spray dryer process to improve the dispersibility, of graphene oxide(GO) and its application for high-performance supercapacitor. Initially, the neutral solution of GO was obtained using the modified Hummer's method. After this, the prepared GO solution was processed by mini spray dryer to obtain a more purified, lighter, and dispersed form of GO which is named as spray dryer processed GO (SPGO). The SPGO thus obtained showed excellent dispersibility behavior with various solvents, which is not found in case of conventional oven drying. Furthermore, utility of SPGO and its reduced form (r-SPGO) for supercapacitor applications have been investigated. Results obtained from the cyclic voltammetry(CV) analysis, impedance, and charge-discharge behavior of supercapacitor fabricated using r-SPGO shows enhanced features. Therefore, the simple spray dried GO and its reduced form, that is, r-SPGO can be utilized as a potential candidate for the supercapacitor application. Herein, as synthesized SPGO exhibited the specific capacitance of 12.07 and 37.6 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively, at a scan rate of 5 mV/s. On the other hand, reduced form of SPGO, that is, r-SPGO showed the specific capacitance of 27.16 and 230 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively.     

Facile synthesis of asymmetric patchy Janus Ag/Cu particles and study of their antifungal activity

Asymmetric patchy Ag/Cu Janus nanoparticles (NPs) were synthesized via a “seed-mediated” approach. This is the first report of synthesis of nanometer sized metal-based Janus NPs without using complicated methods. Selective adsorption of the surfactant onto the seed NPs leads to the formation of Janus type structure. Subsequently the reduction potential of Ag⁺/Ag⁰ and Cu²⁺/Cu⁰ systems directs the formation of the “patch”. The patchy Janus NPs show significant antifungal activity towards a potent rice pathogen thus offering the prospect of future application in crop protection.     

In vitro and in vivo degradability,biocompatibility and antimicrobial characteristics of Cu added iron-manganese alloy

In recent years,iron(Fe)based degradable metal is explored as an alternative to permanent fracture fixation devices.In the present work,copper(Cu)is added in Fe-Mn system to enhance the degradation rate and antimicrobial properties.Fe-Mn-xCu(x=0.9,5 and 10 wt.％)alloys are prepared by the melting-casting-forging route.XRD analysis confirms austenite phase stabilization due to the presence of Mn and Cu.As predicted by Thermo-Calc calculations,Cu rich phase precipitations are noticed along the austen-ite grain boundaries.Degradation behaviours of Cu added Fe-Mn alloys are investigated through static immersion and electrochemical polarization where enhanced degradation is found for higher Cu added alloys.When challenged against E.Coli bacteria,the Fe-Mn-Cu alloy media extract shows a significant bac-tericidal effect compare to the base alloy.In vitro cytocompatibility studies,as determined using MG63 and MC3T3-E1 cell lines,indicate increased cell density as a function of time for all the alloys.When implanted in rabbit femur,the newly developed alloy does not show any kind of tissue necrosis around the implants.Better osteogenesis and higher new bone formation are observed with Fe-Mn-10Cu alloy as evident from micro-computed tomography(μ-CT)and fluorochrome labelling.     

Effect of the Time and Temperature of Isothermal Quenching on Microstructure and Mechanical Properties of Bainitic Gray Cast Iron

Metal Science and Heat Treatment - Mechanical properties of copper-alloyed bainitic gray cast iron are studied after isothermal quenching for bainite at different temperatures and holds. The...     

Particle size reduction of RDX by sequential application of solvent–antisolvent recrystallization and mechanical methods

ABSTRACT

Solvent–antisolvent recrystallization produced ~8 µm average size RDX particles (UF-RDX) that were subsequently subjected to mechanical methods of ultrasonication and ball-milling to find further achievable reduction in particle size. Long duration ultrasonication for 20 h and 300 rpm ball milling for 4 h of UF-RDX decreased its average particle size to ~2 µm. RDX produced by all the three processes (solvent–antisolvent recrystallization, ultrasonication and ball-milling) was similar to coarser RDX in structure and thermal decomposition behavior. However, UF-RDX produced by solvent–antisolvent recrystallization was significantly less impact sensitive than that produced by ball-milling and ultrasonication. The issues of residual solvent and the metal contamination during RDX processing were addressed by process parameter optimization. Solvent–antisolvent recrystallization and mechanical methods even when used sequentially could not bring average particle size of RDX to nano-scale.     

Role of additives in fabrication of soy-based rigid polyurethane foam for structural and thermal insulation applications

Environmental concerns continue to pose the challenge to replace petroleum-based products with renewable ones completely or at least partially while maintaining comparable properties. Herein, rigid polyurethane (PU) foams were prepared using soy-based polyol for structural and thermal insulation applications. Cell size, density, thermal resistivity, and compression force deflection (CFD) values were evaluated and compared with that of petroleum-based PU foam Baydur 683. The roles of different additives, that is, catalyst, blowing agent, surfactants, and different functionalities of polyol on the properties of fabricated foam were also investigated. For this study, dibutyltin dilaurate was employed as catalyst and water as environment friendly blowing agent. Their competitive effect on density and cell size of the PU foams were evaluated. Five different silicone-based surfactants were employed to study the effect of surface tension on cell size of foam. It was also found that 5 g of surfactant per 100 g of polyol produced a foam with minimum surface tension and highest thermal resistivity (R value: 26.11 m²·K/W). However, CFD values were compromised for higher surfactant loading. Additionally, blending of 5 g of higher functionality soy-based polyol improved the CFD values to 328.19 kPa, which was comparable to that of petroleum-based foam Baydur 683.     

Poly(N-vinylpyrrolidone)-stabilized colloidal graphene-reinforced poly(ethylene-co-methyl acrylate) to mitigate electromagnetic radiation pollution

Polymer Bulletin - Electrically conducting flexible polymeric nanocomposite has been fabricated through wet mixing method where conducting inclusion was acoustically exfoliated pristine graphene...     

New pseudo-dynamic analysis of two-layered cohesive-friction soil slope and its numerical validation

Natural slopes consist of non-homogeneous soil profiles with distinct characteristics from slopes made of homogeneous soil. In this study, the limit equilibrium modified pseudo-dynamic method is used to analyze the stability of two-layered c-φ soil slopes in which the failure surface is assumed to be a logarithmic spiral. The zero-stress boundary condition at the ground surface under the seismic loading condition is satisfied. New formulations derived from an analytical method are proposed for the predicting the seismic response in two-layered soil. A detailed parametric study was performed in which various parameters (seismic accelerations, damping, cohesion, and angle of internal friction) were varied. The results of the present method were compared with those in the available literature. The present analytical analysis was also verified against the finite element analysis results.     

PDMS microfluidics: A mini review

Polydimethylsiloxane (PDMS) is hailed as one of the foundational materials for microfluidics. Though a silicone-based elastomer of many desirable properties, the emergence of microfluidic fabrication techniques, especially soft lithography, has elevated its status to an exceptional one. In this mini review, we look at the salient aspects that make PDMS so special in achieving such a coveted status in the microfluidics community. A methodical approach is followed to touch upon the application of PDMS in various aspects of microfluidics with the advantages, limitations, and some future directions. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48958.