Combustion synthesis of AlN doped with carbon and oxygen

Carbon-and-oxygen-doped AlN specimens were prepared by combustion synthesis using Al, graphite, and AlN. Graphite addition changed the product color from white to blue. By XRD, the lattice constant increased slightly with increasing carbon content. Blue AlN powder was synthesized with a molar ratio of the diluent AlN of 0.2-0.5 with a fixed graphite content of 0.05. At an AlN molar ratio exceeding 0.6, carbon was not successfully incorporated due to the lower reaction temperature. Calcination at 800°C in air removed residual graphite without changing the crystal structure or product color. Oxygen, nitrogen, and carbon analyses revealed that blue AlN powders contained 0.45-0.54 mass% carbon and 1.4-1.6 mass% oxygen, while the undoped AlN contained 0.021 mass% carbon and 0.94 mass% oxygen. The origin of the white-to-blue color change was investigated via reflection measurements. Blue AlN exhibits an absorption peak at 634 nm (1.96 eV). From first-principles electronic structure calculations, the C-doped AlN and carbon-and-oxygen-doped AlN with a 1:1 ratio could be classified as p-type, whereas the O-doped AlN and 1:3 carbon-and-oxygen-doped AlN were n-type. One reason for the absorption peak at 634 nm may be a transition from the conduction band to an upper unoccupied state. These results suggest the possible control of optical and electronic properties of AlN via carbon-and-oxygen doping.     

融媒体时代广播电视工程技术中存在的问题及对策

由于受到各种因素的影响,广播电视的技术发展仍存在不少问题,亟待进行创新和转型,以提高广播电视工程的技术水平,为广大人民群众提供优质的服务。     

基于多尺度高斯核的分布式正则化回归学习算法

针对工业、信息等领域出现的基于较大规模、非平稳变化复杂数据的回归问题,已有算法在计算成本及拟合效果方面无法同时满足要求.因此,文中提出基于多尺度高斯核的分布式正则化回归学习算法.算法中的假设空间为多个具有不同尺度的高斯核生成的再生核Hilbert空间的和空间.考虑到整个数据集划分的不同互斥子集波动程度不同,建立不同组合系数核函数逼近模型.利用最小二乘正则化方法同时独立求解各逼近模型.最后,通过对所得的各个局部估计子加权合成得到整体逼近模型.在2个模拟数据集和4个真实数据集上的实验表明,文中算法既能保证较优的拟合性能,又能降低运行时间.     

ZSM-5沸石膜用于生物油的脱水分离及其再生过程研究

在水热条件下通过无模板剂法合成了连续的ZSM-5沸石膜，并将其用于生物油的渗透汽化以进行高效脱水分离。ZSM-5沸石膜在强酸性、多组分的生物油体系中保持了很好的化学稳定性和优异的分离选择性，但在分离过程中面临着较强的膜污染问题，导致了膜通量的大幅下降。ZSM-5沸石膜的再生研究表明，膜的渗透通量随着再生温度的升高而逐渐提高。当再生温度为220℃时，ZSM-5沸石膜的渗透通量可以恢复至初始的88%。再生的机理研究表明，ZSM-5沸石膜中大量的晶内孔在生物油体系中极易被污染，从而导致渗透通量迅速下降；而相对较大的晶间孔却难以被完全堵塞，水分子在被污染的ZSM-5沸石膜中主要通过晶间孔进行渗透。上述结果表明，通过合理调控ZSM-5沸石膜的晶间孔的数量和尺寸大小可有效提升ZSM-5沸石膜在生物油中的渗透汽化脱水分离性能。     

深水水下管汇的结构设计概述

以南海某油气田的深水水下管汇为例,结合管汇的功能需求、结构组成、结构计算等,对深水水下管汇的结构设计进行了概述。     

轮胎安全相关法规标准的分析与研究

介绍我国产品和汽车轮胎的相关法规和标准现状，分析中国标准、国际标准以及欧盟、美国、印度和印度尼西亚轮胎安全相关法规标准的区别，评价项目包括轮胎的高速性能、耐久性能、脱圈性能和强度性能，这有助于了解各类轮胎法规标准和认证要求，为我国轮胎产业发展提供借鉴。     

悬浮于润滑油中的颗粒运动分析及其对油膜压力的影响

对含有固体颗粒的局部润滑流域建立格子Boltzmann(LBM)离散模型,分析固体颗粒在润滑油中的动力学特性;考虑颗粒形状的影响,推导计入单个固体颗粒运动的润滑方程,并分析得到油膜压力;将油膜流动特性与颗粒动力学计算相结合,分析不同形状的颗粒运动对于油膜压力的影响。分析发现,当颗粒进入润滑油后,经过很短的瞬时颗粒就会达到一个瞬态稳定的状态,无论颗粒在油膜厚度方向的初始位置位于两壁面之间的中线上侧还是下侧,颗粒都会向中线位置移动;当颗粒速度为0时对于油膜压力的影响较大,随着颗粒速度逐渐增大,颗粒对于油膜压力的影响逐渐减小;当颗粒的宽度在油膜厚度方向相同时,长宽比越大的颗粒对于油膜压力的影响也越大;当颗粒长轴相等时,颗粒在油膜厚度方向的宽度越大,则其对于油膜压力的影响也越大,即颗粒形状对于油膜流动的阻碍能力越强,则其对于油膜压力的影响越大。     

Control of aluminum phosphate coating on mullite fibers by surface modification with polyethylenimine

Aluminum phosphate (AlPO₄) is a promising oxidation-resistant and weak interface for ceramic-matrix composites. In this research, AlPO₄ coating was deposited on mullite fibers by an improved liquid-phase method based on electrostatic attraction. A cationic polyelectrolyte, polyethylenimine (PEI), was used for surface modification of mullite fibers. The formation process, phase evolution and microstructure of the coating were studied. The zeta potential of AlPO₄ particles, PEI-adsorbed AlPO₄ particles, and PEI-adsorbed mullite particles was characterized to find the proper pH value for improving electrostatic attraction. The obtained AlPO₄ coating was porous and continuous, whose thickness could be controlled by multiple coating cycles. The relatively low calcination temperature (600 or 1000 °C) was a useful heat treatment method to develop bonding between coating and fiber as well as reduce the fiber strength degradation. The phase transformations of AlPO₄ have little volume change, and cristobalite AlPO₄ is thermal compatible with mullite. Therefore, the coating structure was preserved after calcining at 1200 °C. The technique is also applicable for other fibers contained mullite phase to fabricate high-performance AlPO₄ coated mullite/mullite composites.