Nano fibrillated cellulose-based foam by Pickering emulsion: Preparation,characterizations, and application as dye adsorbent

An ecofriendly and biodegradable porous structure was prepared from drying aqueous foams based on nano fibrillated cellulose (NFC), extracted from softwood pulp by subcritical water/CO₂ treatment (SC-NFC). The primary aim of this work was to use the modified SC-NFC as stabilizer for a water-based Pickering emulsion which upon drying, yielded porous cellulosic materials, a good dye adsorbent. In order to exploit the carboxymethylated SC-NFC (CMSC-NFC, with a degree of substitution of 0.35 and a charge density of 649 μeqv/g) as a stabilizer for water-based Pickering emulsion in subsequent step, an optimized quantity of octyl amine (30 mg/g of SC-NFC) was added to make them partially hydrophobic. A series of dry foam structures were prepared by varying the concentrations of treated CMSC-NFCs and 4 wt% was found to be the optimum concentration to yield foam with high porosity (99%) and low density (0.038 g/cc) along with high compression strength (0.24 MPa), superior to the conventionally extracted NFC. The foams were applied to capture as high as 98% of methylene blue dyes, making them a potential green candidate for treating industrial effluent. In addition, the dye adsorption kinetics and isotherms were found to be well suited with second order kinetics and Langmuir isotherm models.     

Chitosan–silver nanocomposites: New functional biomaterial for health-care applications

Chitosan–silver nanocomposites (CS-HDA-AgNCs) was prepared using chitosan, biogenic silver nanocomposites, and crosslinker, hexamethylene 1,6-di(amino carboxysulfonate) (HDA). The film is flexible and transparent. Its physical, mechanical, thermal, hydrophilicity, and swelling properties were improved by HDA (2.5%). The antimicrobial activity of CS-HDA-AgNCs were not displayed any remarkable zone of inhibition but showed toxic effect in the presence of normal 3T3 fibroblasts and cancer HeLa cells. It decreases to ca. 5–7% for both cell lines. In conclusion, it can be mentioned that the CS-HDA-AgNCs, a kind of new functional biomaterial, could be useful for health-care applications.     

Low Cost Portable Solution for Real-Time Complete Detection and Analysis of Heart Sound Components

Wireless Personal Communications - Detection of heart sound and analysis is required to determine heart rate, heart sound components (S1, S2 and murmurs), and is an important step to...     

Effect of Cryogenic Cooling on the Heat Transfer during Turning of AZ31C Magnesium Alloy

ABSTRACT

A combined analytical and experimental study was carried out to analyze the effects of cryogenic cooling on temperature during turning of AZ31C magnesium alloy. Finite element method was employed to model and simulating the cryogenic and dry turning. Results obtained from the model were found to be in good agreement with the experimental observations. For the maximum temperature at the turned surface, the difference in the experimental and predicted value observed during dry and cryogenic turning was only 4 and 8% respectively. A significant reduction in the maximum temperature on the chip surface (around 35%) and tool surface (around 29%) was observed during the cryogenic turning compared to dry turning. This reduction in temperature was an attribute of liquid nitrogen, which produces intense cooling effect around the vicinity cutting zone where heat generation takes place hence enhancing the heat transfer. The isothermal region belonging to the highest temperature on the tool surface was also reduced by about 42%. The reduction in temperature during cryogenic conditions were found to be beneficial for the machining of magnesium alloys under safe conditions, reducing the risk of ignition and explosions, and also increases the sustainability of the process.     

Effect of spheroidized microstructure on the impact toughness and electrochemical performance of a high-carbon steel

The influence of cementite spheroidization on the impact toughness and electrochemical properties of a high-carbon steel has been thoroughly investigated in this study. Heavy warm rolling, followed by 2 h of annealing, has resulted in near-complete spheroidization, leading to a microstructure consisting of nano-cementite globules dispersed in the ultrafine-grained ferritic matrix. The Charpy impact test exhibited superior impact toughness with increased spheroidization. It is validated by the presence of abundant dimples in the fractographs of spheroidized specimens, in contrast to the as-received one that experienced a brittle failure due to its lamellar pearlitic structure. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) carried out in a 3.5% NaCl solution revealed that the corrosion resistance of the alloy gets improved with the increase in the degree of spheroidization. This is attributed to the lower susceptibility of the spheroidized specimen to microgalvanic corrosion owing to the minimum area of contact between nano-spheroidized cementite and ferrite, as elucidated with the help of EIS results aided by equivalent electrical circuit model.     

Impact of Mole Fractions due to Work Function Variability (WFV) of Metal Gate on Electrical Parameters in Strained SOI-FinFET

In the recent sub-20 nm technology node, the process variability issues have become a major problem for scaling of MOS devices. We present a design for a strained Si/SiGe FinFET on an insulator using a 3D TCAD simulator. The impact of metal gate work function variability (WFV) on electrical parameters is studied. Such impact of WFV for different mole fractions (x) of the SiGe layer in a strained SOI-FinFET with varying grain size is presented. The results show that as the mole fraction is increased, the variability in threshold voltage (σVT) and off current (σIoff) is decreased; while, the variability of on-current (σIon) is increased. A notable observation is the distribution of electrical parameters approaches a normal distribution for smaller grain sizes.     

Investigation on energy storage and conversion properties of multifunctional PANI-MWCNT composite

Polyaniline-multiwalled carbon nanotube (PANI-MWCNT) composite synthesized through chemical polymerization is investigated as a possible electrode material for supercapacitor as well as an electro-catalyst for hydrogen evolution reaction (HER) in acidic medium. UV–Vis spectroscopy, FTIR spectroscopy and field emission scanning electron microscopy (FESEM) have been used to characterize the electrode material. The binder-free electrodes were prepared and they exhibit a specific capacitance of 540.29 F g^?1 at a scan rate of 2 mV s^?1 in 1 M H₂SO₄ electrolyte. The material exhibits excellent pseudocapacitive behaviour due to the presence of PANI with long-term cyclic stability of 87.4% retention after 5000 cycles. PANI-MWCNT composite also shows good HER activity, with overpotential of ?395 mV.     

Impact of Climate Change on Future Flood Susceptibility: an Evaluation Based on Deep Learning Algorithms and GCM Model

Floods are common and recurring natural hazards which damages is the destruction for society. Several regions of the world with different climatic conditions face the challenge of floods in different magnitudes. Here we estimate flood susceptibility based on Analytical neural network (ANN), Deep learning neural network (DLNN) and Deep boost (DB) algorithm approach. We also attempt to estimate the future rainfall scenario, using the General circulation model (GCM) with its ensemble. The Representative concentration pathway (RCP) scenario is employed for estimating the future rainfall in more an authentic way. The validation of all models was done with considering different indices and the results show that the DB model is most optimal as compared to the other models. According to the DB model, the spatial coverage of very low, low, moderate, high and very high flood prone region is 68.20%, 9.48%, 5.64%, 7.34% and 9.33% respectively. The approach and results in this research would be beneficial to take the decision in managing this natural hazard in a more efficient way.

     

High-temperature degradation of butadiene-based model elastomers by reactive molecular dynamics simulation

Thermal degradation of butadiene-based model elastomers was analyzed via a novel reactive molecular dynamics simulation (ReaxFF) method. The molecular simulation was carried out on 40 monomer units connected together. Degradation pathways of both homopolymer and copolymer of butadiene-based model elastomers such as polybutadiene (BR) and poly (styrene-co-butadiene) (SBR) were studied. The evolution of different fragmented products was examined as a function of time and heating rate. The formation mechanisms of different degraded fragments were visualized via the simulation method. The major decomposition products obtained from these model compounds were the monomers and comonomers. Pyrolysis gas chromatography–mass spectrometry (py-GC–MS) analysis was performed on the commercial samples of BR and SBR to verify the simulation results. The results obtained from the reactive simulation were very consistent with the experimental results. The activation energy required for the thermal decomposition of butadiene-based model elastomers were calculated both from the ReaxFF simulation and thermogravimetric analysis (TGA). The results were also in good agreement. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48592.