Effect of Co addition on microstructural and mechanical properties of WC–B4C–SiC composites

In this study, the effect of Co addition on microstructural and mechanical properties of WC-B₄C–SiC composites sintered by spark plasma sintering (SPS) method was investigated. For this purpose, three batches of WC-B₄C–SiC with different contents of Co (10 vol%, 15 vol%, and 20 Vol %) were sintered at 1400 °C. The results of X-ray diffraction (XRD) analysis of the samples indicated the formation of W₂B₅, W₃CoB₃ as well as the remained C phases and unreacted SiC phase. It was observed that by increasing the Co content, the amount of W₂B₅ phase reduces and W₃CoB₃ and C contents increase. Therefore, W₂B₅ peaks were not detected in the sample containing 20vol% Co. Relative density values above 97% were obtained for all the composites. However, a decrease was observed in relative density by increasing the Co content in the composites. The highest flexural strength (510 ± 42 MPa), fracture toughness (10.34 ± 0.82 MPa m^1/2), and hardness (20.63 ± 0.75 GPa) were also obtained for the sample containing 10vol% Co compared to the other samples. In addition, Transgranular fracture of SiC as well as pulling out of W₃CoB₃ and W₂B₅ particles were observed in the fracture surface micrographs of the samples. The presence of micro-cracks in the SiC grains, fracture of W₃CoB₃ grains, and crack deflection was reported as dominant toughening mechanisms.     

Pd(II)/Pd(0) Anchored on Magnetic Organic–Inorganic Hybrid Mesoporous Silica Nanoparticles: A Nanocatalyst for Suzuki–Miyaura and Heck–Mizoroki Coupling Reactions

Journal of Inorganic and Organometallic Polymers and Materials - 3-Chloropropyltrimethoxysilane (CPTMS) was grafted on the surface of silica coated Fe3O4 core (Fe3O4@MCM-41) and then condensed with...     

Radiation pattern design of photonic crystal LED optimized by using multi-objective grey wolf optimizer

Photonic Network Communications - This paper proposes an effective method for shaping the radiation pattern intensity of photonic crystal (PhC) light-emitting diode (LED). In this method, the...     

‘Breaking’ news: uncovering sense-breaking patterns in social media crisis communication during the 2017 Manchester bombing

ABSTRACT

Individuals, (media-) organisations, and crisis responders who are involved in ad hoc crisis communication steadily deploy social media to contribute to collective sense-making as an endeavour to create meaning in highly uncertain situations. Exerting sense-giving in order to shape others’ conceptions is causally preceded by an initial breakup of existing understanding. This study aims to explore patterns of sense-breaking in social media crisis communication and its impact on collective sense-making and sense-giving. To this end, we conducted a case study of the Manchester bombing in 2017, including a social network analysis of 708,147 Twitter postings and a content analysis of 2006 original tweets. We found individual role types to be initiators of sense-breaking in early crisis stages when uncertainty is at its height. Exerting successive sense-giving becomes more challenging if the collective sense-making has progressed along with the sequence of events. This understanding aims to encourage emergency management organisations to move their sense-giving actions closer to the point in time when sense-breaking occurs.     

Development of ensemble machine learning approaches for designing fiber-reinforced polymer composite strain prediction model

Engineering with Computers - Over the past few decades, it has been observed a remarkable progression in the development of computer aid models in the field of civil engineering. Machine learning...     

Hybrid solar parabolic dish power plant and high‐temperature phase change material energy storage system

In this study, a conventional steam power plant with two regenerative boilers is considered, and one of its boilers is replaced with parabolic solar dish collectors and storing the produced thermal energy by the phase change material (PCM) in a storage tank. The results show the necessity of the existence of an auxiliary fired‐gas boiler to provide constant load during the whole 24 hours. The performance of the proposed hybridized system is evaluated through energy and exergy analyses. It was demonstrated that substituting solar collectors with one of the boilers marginally lowers the energy efficiency but increases the exergy efficiency of the whole power plant up to 41.76%. Moreover, it is found out that this hybridization decreases the total irreversibility of the power plant in comparison with the base case, from 51.1 to 47.2 MW. The parametric analysis states that raising the mass flow rate of the heat transfer fluid in the solar collectors not only enhances the system performance but also increases the volume of the PCM tank.     

Immobilization of palladium on benzimidazole functionalized mesoporous silica nanoparticles: catalytic efficacy in Suzuki–Miyaura reaction and nitroarenes reduction

Journal of Porous Materials - Benzimidazole functionalized mesoporous silica nanoparticles immobilized Pd(0)/Pd(II) has been proposed as an efficient catalyst for the one-pot preparation of biaryls...     

Ultrasonic synthesis of Zn-doped CdO nanostructures and their optoelectronic properties

The effect of Zn dopant on the growth of cadmium oxide (CdO) nanostructures through a sonochemical method was investigated. The X-ray diffraction (XRD) patterns of the nanoparticles show CdO cubic structures for the produced samples. Field emission scanning electron microscope (FESEM) images reveal that morphologies of the samples change, when they are doped with Zn atoms, and their sizes reduce. Room temperature photoluminescence (PL) and UV-Vis spectrometers were used to study optical properties of the samples. Evaluation of optical properties indicates that different emission bands result from different transitions and the value of CdO energy band gap increases due to doping. Studies of electrical properties of the nanostructures demonstrate that Zn dopant enhances electrical conductivity and photocurrent generation as the result of light illumination on the nanostructures due to improved density of photo-generated carriers. Considering the obtained outcomes, Zn dopant can alter the physical property of the CdO nanostructures.