Interference-Aware QoS Guarantees in OFDM-Based Cognitive Radio Networks Based on Branch and Bound

Wireless Personal Communications - In the past decade, the OFDM access method has been widely used in different types of networks. Indeed; OFDM is the technology of choice for all major wireless...     

Modified Two-Phase Titration Methods to Quantify Surfactant Concentrations in Chemical-Enhanced Oil Recovery Applications

In enhanced oil recovery applications, surfactants are injected into reservoirs along with polymers and salts. The effluents eluted from lab experiments and field tests are analyzed by HPLC methods using an evaporative light scattering detector (ELSD) detector. When the surfactant concentrations are less than 100 ppm, HPLC methods are inaccurate. A novel two-phase titration method is developed where surfactant concentrations can be quantified using a calibration curve constructed with UV/vis absorption. This method can analyze surfactant concentrations 5–80 ppm where dilution eliminates any high-salinity interferences with the absorption measurements. The method is based on formation of a dye-surfactant complex and the light absorption of the complex has a linear correlation with the surfactant concentration. Anionic surfactant concentrations lower than 100 ppm can be accurately quantified using this method with methylene blue. The method was also developed for low concentrations (<50 ppm) of cationic surfactants using methyl orange and indigo carmine. The indigo carmine method can be used without the use of an organic phase. All methods are applicable at salinities up to 3 wt%. Both the methylene blue method and the methyl orange method can be used to detect zwitterionic surfactants. These methods can be used in the presence of polymers without any prior treatments.     

Investigation of Crystal Structure,Electrical and Magnetic Properties of Spinel Mn-Cd Ferrite Nanoparticles

Journal of Inorganic and Organometallic Polymers and Materials - Cd1&nbsp;?&nbsp;xMnxFe2O4 (x?=?0, 0.25, 0.5, 0.75, 1) spinel ferrite nanoparticle samples were synthesized...     

Evaluation of Some Nonionic Surfactants Derived From Vanillin as Corrosion Inhibitors for Carbon Steel During Drilling Processes

Four eco‐friendly nonionic surfactants based on vanillin were investigated as corrosion inhibitors against carbon steel dissolution during the drilling process in the oil field. The corrosion inhibition efficiencies of the tested compounds were determined using weight loss, electrochemical polarization, and electrochemical impedance techniques. The data obtained show that the nonionic surfactants prevent the corrosion of drilling tools and their inhibition efficiency increased with an increase in their concentration. Tafel curves revealed that the surfactants under study act as mixed inhibitors. The adsorption of the inhibitors on carbon steel surface decreases the double‐layer capacitance. The inhibition efficiencies of the surfactants were influenced by their chemical structure and surface activity.     

Novel composite sandwich structure from green materials: Mechanical,physical, and biological evaluation

Flax and Jute fabrics were used as reinforcements with polyester resin to form composite skins while poplar particleboard was used as a core for making composite sandwich structures by applying vacuum assisted resin transfer molding (VARTM) technique. Mechanical, physical, and biological properties of these novel composite sandwich structures were evaluated. The results showed that the proposed engineered panels have superior mechanical properties that are suitable for different structural applications compared with conventional particleboards. When compared with the control panels, significant enhancement on Modulus of elasticity (MOE) and Modulus of rupture (MOR) were achieved. On the other hand, the results indicated that the proposed panel composites exhibit better dimensional stability compared with poplar particleboard control panels. In addition, the proposed composite sandwich structures proved resistant against the decay fungi after 12 weeks of fungal exposure. Obviously, the developed composite panels could be used in a wide variety of applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42253.     

Mono‐, Di‐ and Tetra‐Cationic Surfactants as Carbon Steel Corrosion Inhibitors

Corrosion inhibition of three new synthesized cationic surfactants, N‐(2‐(((Z)‐4‐(pyridin‐4‐yl)but‐3‐en‐1‐yl)amino)ethyl)‐N‐(2‐((E)‐(pyridin‐4‐ylmethylene)amino)ethyl)dodecan‐1‐aminium bromide I(4N), N¹,N²‐didodecyl‐N¹‐((Z)‐4‐(pyridin‐4‐yl)but‐3‐en‐1‐yl)‐N²‐(2‐((E)‐(pyridin‐4‐ylmethylene)amino)ethyl)ethane‐1,2‐diaminium bromide II(4N) and 1‐dodecyl‐4‐((E)‐((2‐(dodecyl(2‐(dodecyl((Z)‐4‐(1‐dodecylpyridin‐1‐ium‐4‐yl)but‐3‐en‐1‐yl)ammonio)ethyl)ammonio)ethyl)imino)methyl)pyridin‐1‐ium bromide IV(4N) on carbon steel was investigated by weight loss, electrochemical impedance spectroscopy and polarization measurements. Results show that the synthesized cationic surfactants inhibit corrosion of carbon steel in 1 M HCl. The inhibitive action occurs by virtue of adsorption on the metal surface following a Langmuir adsorption isotherm model. Polarization curves reveal that the investigated cationic surfactants can be classified as mixed inhibitor types. The variations in the corrosion inhibition efficiency between three cationic surfactants are correlated with their chemical structures, with more hydrophobic surfactants yielding higher inhibition efficiency.     

Oxy‐fuel combustion technology: current status,applications, and trends

The increased level of emissions of carbon dioxide into the atmosphere due to burning of fossil fuels represents one of the main barriers toward the reduction of greenhouse gases and the control of global warming. In the last decades, the use of renewable and clean sources of energies such as solar and wind energies has been increased extensively. However, due to the tremendously increasing world energy demand, fossil fuels would continue in use for decades which necessitates the integration of carbon capture technologies (CCTs) in power plants. These technologies include oxycombustion, pre‐combustion, and post‐combustion carbon capture. Oxycombustion technology is one of the most promising carbon capture technologies as it can be applied with slight modifications to existing power plants or to new power plants. In this technology, fuel is burned using an oxidizer mixture of pure oxygen plus recycled exhaust gases (consists mainly of CO₂). The oxycombustion process results in highly CO₂‐concentrated exhaust gases, which facilitates the capture process of CO₂ after H₂O condensation. The captured CO₂ can be used for industrial applications or can be sequestrated. The current work reviews the current status of oxycombustion technology and its applications in existing conventional combustion systems (including gas turbines and boilers) and novel oxygen transport reactors (OTRs). The review starts with an introduction to the available CCTs with emphasis on their different applications and limitations of use, followed by a review on oxycombustion applications in different combustion systems utilizing gaseous, liquid, and coal fuels. The current status and technology readiness level of oxycombustion technology is discussed. The novel application of oxycombustion technology in OTRs is analyzed in some details. The analyses of OTRs include oxygen permeation technique, fabrication of oxygen transport membranes (OTMs), calculation of oxygen permeation flux, and coupling between oxygen separation and oxycombustion of fuel within the same unit called OTR. The oxycombustion process inside OTR is analyzed considering coal and gaseous fuels. The future trends of oxycombustion technology are itemized and discussed in details in the present study including: (i) ITMs for syngas production; (ii) combustion utilizing liquid fuels in OTRs; (iii) oxy‐combustion integrated power plants and (iv) third generation technologies for CO₂ capture. Techno‐economic analysis of oxycombustion integrated systems is also discussed trying to assess the future prospects of this technology. Copyright © 2017 John Wiley & Sons, Ltd.