Liquid phase exfoliated WS2 nanosheet-based gas sensor for room temperature NO2 detection

Journal of Materials Science: Materials in Electronics - Layered transition metal dichalcogenide (TMD) materials possess novel and unique semiconducting properties when exfoliated into thin sheets...     

Impact of the electromagnetic flow of an MHD Casson fluid over an oscillating porous plate

This study deals with the effect of electric force and magnetohydrodynamics (MHD) of the transient state on natural convection flow past an oscillating vertical plate. In addition to this, thermal radiation and porous media are also examined in the Casson fluid flow. The Poisson-Boltzmann equation is employed to show the electric potential character within the fluid region, which is put into a linear form by the implementation of Debye–Hückel linearization. It is possible to compute the precise solution to the governing equations using the Laplace transform approach. The expression of fluid velocity, fluid concentration, and temperature are exposed graphically, and numerical results for Nusselt and Sherwood numbers are also derived for vital pertinent flow constraints. Increasing electroosmosis parameters strongly boosts fluid velocity. The nonnegative values of the Helmholtz–Smoluchowski velocity highly induce the axial velocity and the negative value decelerates. With increasing radiation strength and Prandtl number, the fluid's temperature distribution diminishes. These more intricate electrokinetic rheological flows associated with electroosmotic separators, such as biomedical absorbers, are illuminated by these models.     

rGO Sheets/ZnFe2O4 Nanocomposities as an Efficient Electro Catalyst Material for I3−/I− Reaction for High Performance DSSCs

In this paper, Reduced Graphene Oxide (rGO)/ZnFe₂O₄ (rZnF) nanocomposite is synthesized by a simple hydrothermal method and employed as a counter electrode (CE) material for tri-iodide redox reactions in Dye sensitized solar cells (DSSC) to replace the traditional high cost platinum (Pt) CE. X-ray diffraction analysis and High resolution Transmission electron microscopy, clearly indicated the formation of rZnF nanocomposite and also amorphous rGO sheets were smoothly distributed on the surface of ZnFe₂O₄ (ZnF) nanostructure. The rZnF-50 CE shows excellent electro catalytic activity toward I₃^? reduction, which has simultaneously been confirmed by cyclic voltammetry, electrochemical impedance spectroscopy and Tafel polarization measurements. A DSSC developed by rZnF-50 CE (η?=?8.71%) obtained quite higher than the Pt (η?=?8.53%) based CE under the same condition. The superior performances of rZnF-50 CE due to addition of graphene in to Spinel (ZnF) nanostructure results in creation of highly active electrochemical sites, fast electron transport linkage between CE and electrolyte. Thus it’s a promising low cost CE material for DSSCs.

     

Zein-based anti-browning cling wraps for fresh-cut apple slices

The usage of cling wraps is emerging as an easy and cost-effective approach to protect fresh-cut fruits and vegetables from dust, whilst improving visual appeal on retail counters. This study focused on developing an alternate, protein-based packaging material as a food grade cling wrap for food packaging applications. Zein-based cling wraps were produced, and their physical and mechanical characteristics were evaluated and compared with conventionally used chitosan biopolymer films and commercial synthetic polymer films. Antioxidant potential of the prepared films was studied, and the effectiveness of the developed films as anti-browning cling wraps was evaluated using studies conducted on fresh-cut apple slices at ambient conditions. Anti-browning effects were in par with polymeric counterparts; however, zein cling wraps could better prevent weight loss in apple slices. Zein-based films can be adopted as biodegradable food grade cling wraps as an alternative to chitosan and synthetic polymeric materials.     

Mechanical Properties and Microstructural Characteristics of Friction Welded Dissimilar Joints of Aluminium Alloys

Joining of similar and dissimilar combinations of aluminium alloys 2024 and 6061 were performed using friction welding technique. Microstructure, hardness and tensile properties of the joints were characterized. Microstructure of the alloy were found to change significantly across the joint such as fully deformed, partially deformed and undeformed regions due to deformation, frictional heat and alloy characteristics. Extensive fine grain size was observed in the fully deformed region and volume fraction of finer grains was higher in the alloy 2024 as compared to alloy 6061. Hardness was lower in the weld interface region of the similar joints of AA2024 and AA6061. The lower hardness in the dissimilar metal joint was observed in the heat affected zone of alloy 6061. The tensile strengths of the similar joints were 80 and 85% of respective base metal of alloys 2024 and 6061. The strength of the dissimilar metal joint was observed to be similar to the base metal strength of 6061 alloy. Tensile fracture occurred in the region of joints where lower hardness was observed. The maximum elongation were obtained in dissimilar joints of alloys and characterized by scanning electron microscope. It revealed deep dimple patterns unlike what was observed in similar joints.     

Seed Oil Based Zinc Bioactive Polymers: Synthesis, Characterization and Biological Studies

Zinc containing oil based polyesteramide resins were synthesized by condensation polymerization reaction between castor/soyabean oil derived castor/soyabean fatty amide diol (HECA/HESA), Zn (OH)₂ and adipic acid. The conventional spectroscopic techniques such as FTIR, ¹HNMR, ¹³CNMR have been used to establish the structure of the polymers. Standard laboratory methods were used to study the physicochemical characteristics like acid value, hydroxyl value, saponification value, iodine value, specific gravity, and viscosity. The thermal behaviour of the polymers was analyzed by using thermo gravimetric analysis (TGA) and differential scanning calorimetry (DSC). In vitro antifungal (anticandidial) activity of the polymers was studied against C. albicans ATCC-10261, C. glabrata ATCC-90030 and C. tropicalis ATCC-750, respectively. Antibacterial activity against Gram positive (S. subtillis) and Gram negative bacteria (E. coli and S. typhi) was also examined. For more accuracy, growth curve studies were carried out with the polymer SZ showing higher biological activity against E. coli by using conventional spectrophotometer. The result showed that the polymers have potent anticandidial and antibacterial activities.     

The influence of mesoscale eddies on a commercial fishery in the coastal waters of the Andaman and Nicobar Islands,India

Mesoscale eddies enhance the productivity in a stratified coastal environment by upwelling. The seas around the Andaman and Nicobar Islands have been found to have frequent mesoscale eddy activity. Commercial fishing grounds coincide with upwelling areas associated with cyclonic and anticyclonic eddies and also with areas between two adjacent eddies. There are different eddy zones supporting different types of fishing gears and fish. The current study aims at identifying the different zones of mesoscale eddies in the Andaman Sea and compares the productivity and fishing activity in each of them. Data collected from 454 commercial fishing trips in the Andaman Sea along with maps of sea level anomaly and Moderate Resolution Imaging Spectroradiometer (MODIS) global level 3 mapped thermal infrared (IR) daytime sea surface temperature (SST) from the Aqua and Terra satellites were used for the study. Known upwelling areas such as the periphery of anticyclonic and the core of cyclonic eddies showed higher catches in longlines, ring seines among the fishing gears, and among all the fish species groups. Downwelling areas such as the periphery of cyclonic and the core of anticyclonic eddies showed lower catches with ring seines and the fish species groups. Areas in between adjacent eddies were explored in this study and the fish captures in such areas were found to be different with types of fishing and the target fish group. The study shows results that link eddy activity with the performance of a fishery.     

Improving the performance of speaker and language identification tasks using unique characteristics of a class

In classification tasks, the error rate is proportional to the commonality among classes. In conventional GMM-based modeling technique, since the model parameters of a class are estimated without considering other classes in the system, features that are common across various classes may also be captured, along with unique features. This paper proposes to use unique characteristics of a class at the feature-level and at the phoneme-level, separately, to improve the classification accuracy. At the feature-level, the performance of a classifier has been analyzed by capturing the unique features while modeling, and removing common feature vectors during classification. Experiments were conducted on speaker identification task, using speech data of 40 female speakers from NTIMIT corpus, and on a language identification task, using speech data of two languages (English and French) from OGI_MLTS corpus. At the phoneme-level, performance of a classifier has been analyzed by identifying a subset of phonemes, which are unique to a speaker with respect to his/her closely resembling speaker, in the acoustic sense, on a speaker identification task. In both the cases (feature-level and phoneme-level) considerable improvement in classification accuracy is observed over conventional GMM-based classifiers in the above mentioned tasks. Among the three experimental setup, speaker identification task using unique phonemes shows as high as 9.56 % performance improvement over conventional GMM-based classifier.     

Ubiquitin-Specific Protease 29 Regulates Cdc25A-Mediated Tumorigenesis

Cell division cycle 25A (Cdc25A) is a dual-specificity phosphatase that is overexpressed in several cancer cells and promotes tumorigenesis. In normal cells, Cdc25A expression is regulated tightly, but the changes in expression patterns in cancer cells that lead to tumorigenesis are unknown. In this study, we showed that ubiquitin-specific protease 29 (USP29) stabilized Cdc25A protein expression in cancer cell lines by protecting it from ubiquitin-mediated proteasomal degradation. The presence of USP29 effectively blocked polyubiquitination of Cdc25A and extended its half-life. CRISPR-Cas9-mediated knockdown of USP29 in HeLa cells resulted in cell cycle arrest at the G0/G1 phase. We also showed that USP29 knockdown hampered Cdc25A-mediated cell proliferation, migration, and invasion of cancer cells in vitro. Moreover, NSG nude mice transplanted with USP29-depleted cells significantly reduced the size of the tumors, whereas the reconstitution of Cdc25A in USP29-depleted cells significantly increased the tumor size. Altogether, our results implied that USP29 promoted cell cycle progression and oncogenic transformation by regulating protein turnover of Cdc25A.