Three and one-dimensional hierarchical α-Fe2O3 nanostructures for photoelectrochemical water oxidation

Journal of Materials Science: Materials in Electronics - Herein, we report the synthesis of three-dimensional (3D) and one-dimensional (1D) hierarchical hematite (α-Fe2O3) nanostructures on...     

Use of Beta Cyclodextrin to Remove Cholesterol and Increase Astaxanthin Content in Shrimp Oil

Shrimp oil is extracted from shrimp (Litopenaeus vannamei) cephalothorax and subjected to the removal of cholesterol by β‐cyclodextrin (βCD). Different oil/βCD ratios (1:2, 1:3, and 1:4, w/w) and homogenization times (1, 10, and 20 min) are used. Cholesterol deduction is attained with increasing βCD levels and homogenization time. Astaxanthin content is augmented, while cholesterol concentration is reduced. Nevertheless, oil yield and astaxanthin concentration of treated oil are decreased as βCD levels are increased. To increase the oil yield, the used βCD is further extracted for three times with ethyl acetate at 1:10 (w/v) ratio, in which yield is increased from 44.6% to 64%. Cholesterol removal of 95% is obtained, while astaxanthin content is increased. Lipid oxidation is lowered as indicated by the lower TOTOX value, peroxide value, thiobarbituric acid reactive substances, and p‐anisidine value. However, lipid hydrolysis is slightly increased after treatment. Volatiles, especially aldehydes and alcohols, are decreased after treatment. FTIR spectra confirm the removal of phospholipid, which might be associated with the decreased oil yield after treatment. With the developed process, total fatty acid is increased by 15.6%, in which monounsaturated fatty acid (MUFA) and polyunsaturated fatty acid (PUFA) are augmented. βCD could remove cholesterol, increase astaxanthin and fatty acid content. Practical Applications: Shrimp oil has been known to be a rich source of astaxanthin and PUFAs with health benefit. However, it also contains cholesterol, which can be a drawback for consumption as the supplement. The removal of cholesterol, while maintaining PUFA and astaxanthin could pave a way for promoting the intake of shrimp oil. Use of βCD for oil treatment with subsequent extraction of remaining oil in the used βCD could be implemented with ease. Another advantage of the developed process is to increase both fatty acid and astaxanthin contents in the resulting oil. As a consequence, shrimp oil with lowered cholesterol can be directly used as food ingredient and also for neutraceutical purpose.     

Liquid phase exfoliated WS2 nanosheet-based gas sensor for room temperature NO2 detection

Journal of Materials Science: Materials in Electronics - Layered transition metal dichalcogenide (TMD) materials possess novel and unique semiconducting properties when exfoliated into thin sheets...     

Synergic effect of Sn-doped TiO2 nanostructures for enhanced visible light photocatalysis

Journal of Materials Science: Materials in Electronics - In the recent years, metal oxides have attracted more interest for researchers because of their applications in energy and...     

Novel and simple methodology to fabricate porous and buckled fibrous structures for biomedical applications

Reproducible buckled and porous sub-micron diameter polycaprolactone (PCL) fibers were produced by simple electrospinning process for biomedical applications. In this study, six types of solvent combinations with different vapor pressures were used to study the effect of phase separation on the morphology of electrospun fibers. The fiber morphology, Infrared spectroscopy, water contact angle and tensile test were performed to study the material properties. It is evident that the fiber morphology was affected by solvent combinations used for the fabrication of sub-micron fibers. The solution viscosity, the collecting distance and the type of solvent combination used could be an optimum parameter for the generation of porous-buckled fibers with narrow pore size distribution. The simplicity of the set-up is the immense advantage for producing buckled and porous elastomeric fibers for tissue engineering applications. All the fibers were spun on a motionless collector plate to study the properties of fibers. The combination of surface pores with the buckled pattern could be of great importance in the field of biomedical engineering.     

Conductivity enhancement of PEDOT:PSS thin film using roll to plate technique and its characterization as a Schottky diode

The conductivity of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) was improved by pressing the PEDOT:PSS thin film using roll to plate system. PEDOT:PSS thin film was deposited on polyethylene terephthalate using electrohydrodynamics atomization technique. The physico-chemical properties of the pressed thin film at different loads were compared with an un-pressed sample. The electrical properties show that the film conductivity has been increased by four times. An optimized pressing load was found to have good conductivity and transmittance of the thin film. A hybrid device (PEDOT:PSS/F8BT/ZnO/Ag) was fabricated using layer by layer method with PEDOT:PSS as anode. The I–V characterization showed that the device with pressed PEDOT:PSS showed higher current densities. The results give a promising future of PEDOT:PSS in electronics device applications using printed electronics techniques.     

Synthesis of r-GO-incorporated CoWO4 nanostructure for high-performance supercapattery applications

The avant-garde supercapatteries have received substantial curiosity for their noteworthy electrochemical performance. Devising battery-type substances with appreciable electrocapacitive accomplishment and high electrical transmittance is imperative to boost the energy stowing knack of supercapattery devices. A pure CoWO₄ nanostructure and a composite of CoWO₄ incorporating r-GO were prepared by hydrothermal method. The XRD and FTIR results validated the effective development of high-quality CoWO₄ and r-GO. FESEM images reveal a nanosphere-like architecture of CoWO₄ over r-GO sheets. The pure and composite nanomaterials show good battery-like traits in electrochemical studies. The CoWO₄/r-GO electrode exhibits better electrochemical activity compared to pure sample. The specific capacitance (and specific charge capacity) calculated at a current density of 2 A g^?1 for CWO/r-GO and CWO is 382.7 A g^?1 (158.1 C g^?1) and 262.7 A g^?1 (105.1 C g^?1), respectively. The results obtained herein evince that the developed nanocomposite is a propitious electrode candidate for supercapattery.

     

Ru@Pt core–shell nanoparticles for methanol fuel cell catalyst: Control and effects of shell composition

The present work presents a method to encapsulate pre-synthesised Ru nanoparticles (NPs) by Pt using a polyol method without capping agents at various pH values (6, 7, 8 and 10). The structural and surface properties of the catalysts were characterised using X-ray diffraction, transmission electron microscopy, CO stripping, and energy-dispersive X-ray spectroscopy. The studies suggest that the pH during encapsulation of Ru by Pt plays an important role in controlling of shell composition. A core–shell catalyst with an alloy shell was obtained at a pH of 6, whereas a monometallic Pt shell was obtained at a pH of 10. The core–shell catalysts gave higher steady-state current for methanol oxidation: 10-fold higher for alloy shells and 5-fold higher for Pt-enriched shells compared to the pure Pt catalyst. It is suggested that the highest catalytic enhancement of the core–shell catalysts is obtained through the bi-functional character that dominates the alloy shells rather than the ligand-effect-promoted Pt-enriched shells.