Lithiophilic MXene-Guided Lithium Metal Nucleation and Growth Behavior

The positive effects of a lithiophilic substrate on the electrochemical performance of lithium metal anodes are confirmed in several reports, while the understanding of lithiophilic substrate-guided lithium metal nucleation and growth behavior is still insufficient. In this study, the effect of a lithiophilic surface on lithium metal nucleation and growth behaviors is investigated using a large-area Ti₃C₂T_x MXene substrate with a large number of oxygen and fluorine dual heteroatoms. The use of the MXene substrate results in a high lithium-ion concentration as well as the formation of uniform solid–electrolyte-interface (SEI) layers on the lithiophilic surface. The solid–solid interface (MXene-SEI layer) significantly affects the surface tension of the deposited lithium metal nuclei as well as the nucleation overpotential, resulting in the formation of uniformly dispersed lithium nanoparticles ( ≈ 10–20 nm in diameter) over the entire MXene surface. The primary lithium nanoparticles preferentially coalesce and agglomerate into larger secondary particles while retaining their primary particle shapes. Subsequently, they form close-packed structures, resulting in a dense metal layer composed of particle-by-particle microstructures. This distinctive lithium metal deposition behavior leads to highly reversible cycling performance with high Columbic efficiencies >  99.0% and long cycle lives of over 1000 cycles.     

Magnetically Guidable Proteinaceous Adhesive Microbots for Targeted Locoregional Therapeutics Delivery in the Highly Dynamic Environment of the Esophagus

The esophagus is a tubular-shaped muscular organ where swallowed fluids and muscular contractions constitute a highly dynamic environment. The turbulent, coordinated processes that occur through the oropharyngeal conduit can often compromise targeted administration of therapeutic drugs to a lesion, significantly reducing therapeutic efficacy. Here, magnetically guidable drug vehicles capable of strongly adhering to target sites using a bioengineered mussel adhesive protein (MAP) to achieve localized delivery of therapeutic drugs against the hydrodynamic physiological conditions are proposed. A suite of highly uniform microparticles embedded with iron oxide (IO) nanoparticles (MAP@IO MPs) is microfluidically fabricated using the genipin-mediated covalent cross-linking of bioengineered MAP. The MAP@IO MPs are successfully targeted to a specific region and prolongedly retained in the tubular-structured passageway. In particular, orally administered MAP@IO MPs are effectively captured in the esophagus in vivo in a magnetically guidable manner. Moreover, doxorubicin (DOX)-loaded MAP@IO MPs exhibit a sustainable DOX release profile, effective anticancer therapeutic activity, and excellent biocompatibility. Thus, the magnetically guidable locomotion and robust underwater adhesive properties of the proteinaceous soft microbots can provide an intelligent modular approach for targeted locoregional therapeutics delivery to a specific lesion site in dynamic fluid-associated tubular organs such as the esophagus.     

Progressive NO2 Sensors with Rapid Alarm and Persistent Memory-Type Responses for Wide-Range Sensing Using Antimony Triselenide Nanoflakes

Antimony triselenide (Sb₂Se₃) nanoflake-based nitrogen dioxide (NO₂) sensors exhibit a progressive bifunctional gas-sensing performance, with a rapid alarm for hazardous highly concentrated gases, and an advanced memory-type function for low-concentration (<1 ppm) monitoring repeated under potentially fatal exposure. Rectangular and cuboid shaped Sb₂Se₃ nanoflakes, comprising van der Waals planes with large surface areas and covalent bond planes with small areas, can rapidly detect a wide range of NO₂ gas concentrations from 0.1 to 100 ppm. These Sb₂Se₃ nanoflakes are found to be suitable for physisorption-based gas sensing owing to their anisotropic quasi-2D crystal structure with extremely enlarged van der Waals planes, where they are humidity-insensitive and consequently exhibit an extremely stable baseline current. The Sb₂Se₃ nanoflake sensor exhibits a room-temperature/low-voltage operation, which is noticeable owing to its low energy consumption and rapid response even under a NO₂ gas flow of only 1 ppm. As a result, the Sb₂Se₃ nanoflake sensor is suitable for the development of a rapid alarm system. Furthermore, the persistent gas-sensing conductivity of the sensor with a slow decaying current can enable the development of a progressive memory-type sensor that retains the previous signal under irregular gas injection at low concentrations.     

In-situ measurement of reflection coefficient and its application to predicting combustion instability in a gas turbine combustor

Journal of Mechanical Science and Technology - Here, a procedure that uses in-situ data recorded by two microphones placed inside an operating gas turbine combustor to determine the reflection...     

Dynamic Oscillation via Negative Differential Resistance in Type III Junction Organic/Two-Dimensional and Oxide/Two-Dimensional Transition Metal Dichalcogenide Diodes

Among many of 2D semiconductor-based devices, type III PN junction diodes are given special attentions due to their unique function, negative differential resistance (NDR). However, it has been found uneasy to achieve well-matched type III PN junctions from 2D–2D van der Waals heterojunctions. Here, the authors present other alternatives of type III heterojunctions, using 2D p-MoTe₂/organic n-type dipyrazino[2,3-f:2′,3′-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile (HAT-CN) and 2D p-WSe₂/n-MoO_x systems. Those junction diodes appear to well-demonstrate static and dynamic NDR behavior via resonant tunneling and electron–hole recombination. Extended to an inverter circuit, p-MoTe₂/n-HAT-CN diode enables multilevel inverter characteristics as monolithically integrated with p-MoTe₂ channel field effect transistor. The same NDR diode shows dynamic LC oscillation behavior under a constant DC voltage, connected to an external inductor. From p-WSe₂/n-MoO_x oxide diode, similar NDR behavior to those of p-MoTe₂/n-HAT-CN is again observed along with LC oscillations. The authors attribute these visible oscillation results to high peak-to-valley current ratios of their organic or oxide/2D heterojunction diodes.     

An Intelligent Product Recommendation Model to Reflect the Recent Purchasing Patterns of Customers

Mobile Networks and Applications - This study suggests a new product recommendation model to reflect the recent purchasing patterns of customers. There are many methods to measure the similarity...     

Succinct Palette and Color Model Generation and Manipulation Using Hierarchical Representation

We propose a new method to obtain the representative colors and their distributions of an image. Our intuition is that it is possible to derive the global model from the local distributions. Beginning by sampling pure colors, we build a hierarchical representation of colors in the image via a bottom‐up approach. From the resulting hierarchy, we can obtain satisfactory palettes/color models automatically without a predefined size. Furthermore, we provide interactive operations to manipulate the results which allow the users to reflect their intention directly. In our experiment, we show that the proposed method produces more succinct results that faithfully represent all the colors in the image with an appropriate number of components. We also show that the proposed interactive approach can improve the results of applications such as recoloring and soft segmentation.     

Efficient Multi-user Similarity Search Over Encrypted Data in Cloud Storage

Wireless Personal Communications - In cloud-assisted data outsourcing systems, the privacy of sensitive data is a major concern. Thus, data are uploaded in encrypted form in many cloud applications...