Flash pyrolysis of biomass: a review of recent advances

Clean Technologies and Environmental Policy - To assuage global consumer demand for energy, there is a need for increased biofuel production. Flash pyrolysis is an important technique for biomass...     

Kinetic modeling of hemicellulose hydrolysis in the presence of homogeneous and heterogeneous catalysts

Kinetic models were developed for the hydrolysis of O‐acetyl‐galactoglucomannan (GGM), a hemicellulose appearing in coniferous trees. Homogeneous and heterogeneous acid catalysts hydrolyze GGM at about 90°C to the monomeric sugars galactose, glucose, and mannose. In the presence of homogeneous catalysts, such as HCl, H₂SO₄, oxalic acid, and trifluoroacetic acid, the hydrolysis process shows a regular kinetic behavior, while a prominent autocatalytic effect was observed in the presence of heterogeneous cation‐exchange catalysts, Amberlyst 15 and Smopex 101. The kinetic models proposed were based on the reactivities of the nonhydrolyzed sugar units and the increase of the rate constant (for heterogeneous catalysts) as the reaction progresses and the degree of polymerization decreases. General kinetic models were derived and special cases of them were considered in detail, by deriving analytical solutions for product distributions. The kinetic parameters, describing the autocatalytic effect were determined by nonlinear regression analysis. The kinetic model described very well the overall kinetics, as well as the product distribution in the hydrolysis of water soluble GGM by homogeneous and heterogeneous catalysts. The modelling principles developed in the work can be in principle applied to hydrolysis of similar hemicelluloses as well as starch and cellulose. © 2014 American Institute of Chemical Engineers AIChE J, 60: 1066–1077, 2014     

Feasibility of a Dune Infiltration System to Protect North Carolina Beaches from Fecal Bacteria Contaminated Storm Water

Storm water ocean outfalls discharging into recreational waters pose a human health threat because of increased potential exposure to bacteria and other pathogens. The dune infiltration system (DIS) was designed and implemented at two ocean outfall sites in response to concerns by the North Carolina Department of Transportation and the town of Kure Beach, North Carolina The systems were designed to divert storm water runoff from 1.9?ha (4.7 acre) and 3.2?ha (8.0 acre) watersheds into the beach dunes. Following construction, data were collected from 25 storms during March through October 2006. The systems captured a combined total of nearly 1,800??m3 (63,500??ft3), or 95% of the influent storm water runoff—a significant reduction of runoff volume and peak flow discharging directly onto the beach (p<0.0001). Fecal coliform and enterococci concentrations were measured in the inflowing storm water runoff and groundwater downslope of the systems. Both groundwater bacteria concentrations near the systems were significantly lower than the bacteria concentrations in the inflowing storm water (p<0.001). Furthermore, groundwater fecal coliform concentrations after implementing the DISs were statistically similar to preconstruction levels (p<0.05). The initial results are promising, and the system should be considered for more widespread use. However, further comprehensive research is recommended to more thoroughly understand the viability of the DIS as a storm water best management practice and the fate and transport of the bacteria within the dunes.     

Selective Hydrolysis of Arabinogalactan into Arabinose and Galactose Over Heterogeneous Catalysts

Abstract  

The application of solid acid catalysts for the production of monomers from hemicelluloses can be one of the key steps in developing the concept of an integrated forest biorefinery. Arabinogalactans (AG) are hemicelluloses which can be extracted on an industrial scale from larch wood species and has a great potential as a sustainable feedstock for bio-based products. Hydrolysis of AG to monomers over acidic heterogeneous catalysts (Smopex-101 and Amberlyst 15) was successfully demonstrated for the first time to selectively produce arabinose as the primary product, followed by the release of galactose without further degradation of the monomers.     

Incentivizing wood-based Fischer–Tropsch diesel through financial policy instruments: An economic assessment for Norway

The objective of this study is to evaluate a select set of financial incentive instruments that can be employed by the Norwegian government for encouraging early investment and production experience in wood-based Fischer–Tropsch diesel (FTD) technologies as a means to accelerate reductions in greenhouse gas emissions (GHG) stemming from road-based transport. We start by performing an economic analysis of FTD produced from Norwegian forest biomass at a pioneer commercial plant in Norway, followed with a cost growth analysis to estimate production costs after uncertainty in early plant performance and capital cost estimates are considered. Results after the cost growth analysis imply that the initial production cost estimates for a pioneer producer may be underestimated by up to 30%. Using the revised estimate we then assess, through scenarios, how various financial support mechanisms designed to encourage near-term investment would affect production costs over a range of uncertain future oil prices. For all policy scenarios considered, we evaluate trade-offs between the levels of public expenditure, or subsidy, and private investor profitability. When considering the net present value of the subsidy required to incentivize commercial investment during a future of low oil prices, we find that GHG mitigation via wood-FTD is likely to be considered cost-ineffective. However, should the government expect that mean oil prices in the coming two decades will hover between $97 and 127/bbl, all the incentive policies considered would likely spur investment at net present values ≤$-100/tonne-fossil-CO₂-equivalent avoided.     

Sensitivity-Enhanced CMOS Phase Luminometry System Using Xerogel-Based Sensors

We present the design and implementation of a phase luminometry sensor system with improved and tunable detection sensitivity achieved using a complementary metal-oxide semiconductor (CMOS) integrated circuit. We use sol-gel derived xerogel thin films as an immobilization media to house oxygen (O₂) responsive luminescent molecules. The sensor operates on the principal of phase luminometry wherein a sinusoidal modulation signal is used to excite the luminophores encapsulated in the porous xerogel films and the corresponding phase shift of the emission signals is monitored. The phase shift is directly related to excited state lifetimes of the luminophores which in turn are related to the concentration of the target analyte species present in the vicinity of the luminophores. The CMOS IC, which consists of a 16 times 16 high-gain phototransistor array, current-to-voltage converter, amplifier and tunable phase shift detector, consumes an average power of 14 mW with 5-V power supply operating at a 38-kHz modulation frequency. The output of the IC is a dc voltage that corresponds to the detected luminescence phase shift with respect to the excitation signal. As a prototype, we demonstrate an oxygen sensor system by encapsulating the luminophore tris(4,7-diphenyl-1,10-phenanthroline)ruthenium(II) within the xerogel matrices. The sensor system showed a fast response on the order of few seconds and we obtained a detection sensitivity of 118 mV per 1% change in O₂ concentration. The system demonstrates a novel concept to tune and improve the detection sensitivity for specific concentrations of the target analyte in many biomedical monitoring applications.     

Impact of Storm-Water Runoff on Clogging and Fecal Bacteria Reduction in Sand Columns

Storm-water runoff has been identified as a major cause of coastal water quality degradation. Storm-water outfalls, common in many coastal towns, convey bacteria and other pollutants into the ocean and estuaries. In an effort to minimize this impact, the Town of Kure Beach, North Carolina, installed Dune Infiltration Systems (DIS) at two storm-water outfalls to receive storm-water runoff and allow infiltration beneath the beach dunes. A laboratory column experiment was performed to supplement this installation and determine the potential hydraulic and bacterial removal efficiency of the sand comprising the Kure Beach dunes. Columns constructed using sand collected at different depths of the dune were used to analyze the affect of bacteria application on infiltration and to examine the changes in bacteria removal that occur as infiltration rates are affected by bacteria-laden water application. Sand columns were loaded over a 60-day period with either bacteria-free storm water or storm water spiked with Escherichia coli. The seepage rate for the bacteria-spiked storm-water treatment was significantly lower (p<0.05) than the seepage rate of the bacteria-free treatment, particularly toward the end of the study. Bacteria application likely compounds the impact of sediment clogging at the sand/storm-water interface. This study indicates the need for maintenance when implementing a DIS or similar sand filter to maintain design infiltration rates, especially if reduced infiltration rates are not planned for in the design. However, a decrease in seepage rate was correlated with a decrease in effluent bacteria concentration in the bacteria-spiked storm-water sand columns. Thus, optimization is required to provide maximum infiltration of storm-water while maintaining bacteria removal efficiency.