A targeted review of bio-derived plasticizers with flame retardant functionality used in PVC

Journal of Materials Science - For decades, a wide variety of products have benefitted from the use of flexible PVC, ranging from healthcare to cable to packaging & household items. The...     

Influence of market orientation on performance: the moderating roles of customer participation breadth and depth in new product development

ABSTRACT

With a greater number of B2B firms integrating customers into the new product development (NPD) process, how to utilize customer involvement in NPD is an important decision because it may be a double-edged sword carrying both bright and dark sides. Utilizing a sample of 193 B2B firms across various industries, we validate previous research that suggests market orientation positively influences NPD performance and subsequently examine how this relationship may either be enhanced or diminished contingent upon how customers are utilized in the NPD process. The results show that the market orientation–NPD performance relationship is enhanced by having customers participate in a greater number of activities throughout NPD (customer participation breadth) and diminished when customers are involved at deeper levels (customer participation depth). This research suggests that the exact involvement of customers is a critical decision and has clear implications for the dialogues about customer involvement and management of customer relationships.     

Introduction to the special issue on IEEE NEWCAS 2017

A contactless detector is presented for evaluating hand tremors caused by exercise-induced fatigue and early Parkinson’s disease. The device consists of a spiral coil, a microcontroller, and an inductive sensor circuitry. Theory shows that the resonant frequency of the circuitry increases when the distance between the hand and the spiral coil decreases, thus small variations of distance from tremor can be detected from the changes of resonant frequencies. A mechanical hand was built for experiments to simulate human hand tremors with repeatability at a fixed frequency. The magnitudes and frequencies of the tremors in the mechanical hand were quantitatively identified using the inductive sensor. Hence, feasibility and accuracy of the contactless hand tremor detector were determined. A triaxial accelerometer was used for comparison. By comparing spectral distributions and magnitudes of the tremors, the inductive sensor performed better than the accelerometer. The detector was applied to evaluate actual hand tremors of three subjects who had undergone exercise to induce tremors. The tremor waveform amplitudes of the subjects were quantitatively analyzed by the standard deviations method. The increased signal energies of exercise-induced tremor within 8–12 Hz were confirmed. Then, a subject with early Parkinson’s disease was evaluated by the proposed hand tremor detector. The tremor magnitudes and frequencies of the patient hand were quantitatively identified within in 4–7 Hz. Therefore, the new contactless hand tremor detector can be developed as a clinical instrument for monitoring the fatigue symptoms of post-exercise and diagnosing the early Parkinson’s disease.     

Improving the flame retardancy of polypropylene foam with piperazine pyrophosphate via multilayering coextrusion of film/foam composites

A series of 16-layer polypropylene/flame retardant (PP/FR) film/foam composite structures were produced by microlayer coextrusion. A highly branched PP was used in the foam layers to increase strain hardening and cell stability, while the PP used in the film layers was a high shear viscosity grade to confine bubble growth. In addition to improved tensile properties, the PP/FR composite film/foams exhibited five times the compression modulus of PP/FR composite foams at each FR loading level. The thermal stabilities of the composites were investigated, exhibiting three step decompositions. The FR particles were effective in decreasing flammability by forming intumescent char. The PP/FR-film/foam-20 showed self-extinguishing behavior in a modified vertical burn test, while the PP/FR-foam-20 sample continued to burn. Cone calorimetry demonstrated that PP/FR film/foams had lower heat release than PP/FR foams due to the unique alternating film/foam structure of PP/FR film/foams. Scanning electron microscopy imaging of the residual chars from fire testing that the PP/FR composite film/foams showed a more continuous protective char surface when compared with PP/FR composite foams at each FR concentration. The combined data indicate that the formation of a surface film on top of a foam ensures a robust intumescent fire protective barrier for partly foamed materials and shows a new way toward lightweight materials with improved fire safety performance. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48552.     

Development and demonstration of a deployable apparatus for generating hydrogen from the hydrolysis of aluminum via sodium hydroxide

Emergency and backup power is often enabled through the use of petrochemical based fuels and combustion-based generator systems, and while reliable, these backup power systems fail when petrochemical supplies are disrupted due to refinery, oil outages, or transportation delays. Fuel cells in some cases can serve as a backup to these traditional generators, but they also are fuel-limited to supplies of available energy sources. Recent work conducted in our laboratories focused on the development of a “backup” emergency hydrogen generation system that could be employed when existing energy stockpiles have failed or depleted. Specifically, aluminum metal can be used to generate hydrogen for fuel cells via hydrolysis with sodium hydroxide. In this paper, we summarize the engineering work to produce a deployable aluminum to hydrogen generator which is capable of producing 3.75 kg of hydrogen per day from scrap aluminum feedstocks. The generator was built upon an aircraft deployable pallet, allowing for hydrogen to be generated remotely in cases of power and fuel outages.     

Application of HEC-HMS Model for Evaluation of Rainwater Harvesting Potential in a Semi-arid City

Water Resources Management - With many countries facing water scarcity and the demand for water ever-increasing, more people are turning to rainwater harvesting (RWH) as a feasible way of...     

ESMRMB 2017, 34th Annual Scientific Meeting,Barcelona, ES,October 19–October 21: Abstracts,Thursday

Objective

Current magnetic resonance imaging (MRI) axon diameter measurements rely on the pulsed gradient spin-echo sequence, which is unable to provide diffusion times short enough to measure small axon diameters. This study combines the AxCaliber axon diameter fitting method with data generated from Monte Carlo simulations of oscillating gradient spin-echo sequences (OGSE) to infer micron-sized axon diameters, in order to determine the feasibility of using MRI to infer smaller axon diameters in brain tissue.

Materials and methods

Monte Carlo computer simulation data were synthesized from tissue geometries of cylinders of different diameters using a range of gradient frequencies in the cosine OGSE sequence . Data were fitted to the AxCaliber method modified to allow the new pulse sequence. Intra- and extra-axonal water were studied separately and together.

Results

The simulations revealed the extra-axonal model to be problematic. Rather than change the model, we found that restricting the range of gradient frequencies such that the measured apparent diffusion coefficient was constant over that range resulted in more accurate fitted diameters. Thus a careful selection of frequency ranges is needed for the AxCaliber method to correctly model extra-axonal water, or adaptations to the method are needed. This restriction helped reduce the necessary gradient strengths for measurements that could be performed with parameters feasible for a Bruker BG6 gradient set. For these experiments, the simulations inferred diameters as small as 0.5 μm on square-packed and randomly packed cylinders. The accuracy of the inferred diameters was found to be dependent on the signal-to-noise ratio (SNR), with smaller diameters more affected by noise, although all diameter distributions were distinguishable from one another for all SNRs tested.

Conclusion

The results of this study indicate the feasibility of using MRI with OGSE on preclinical scanners to infer small axon diameters.

     

Quantifying the extent of space shortages: English dwellings

Lack of internal space is a problem in UK homes, and is often linked to a lack of space standards for housing in the UK. Although previous studies have examined new-build housing, this paper uses a new method to study 16 000 dwellings in the English Housing Survey (EHS) 2010 to examine existing housing and compare them with a modern space standard in an attempt to quantify the extent and magnitude of the problem. Dwellings in the survey were compared against a slightly modified version of the London Housing Design Guide 2010 internal space standard. It was found that between 21% and 55% of dwellings failed to meet the standard; and that flats and small terraced houses were most commonly below the standard. Dwellings were also frequently found to be under-occupied in comparison with the number of bedrooms. This research hypothesized that this was a result of the lack of space. To illustrate the use of this new analysis method, a recent change to the Housing Benefit system (colloquially known as the ‘Bedroom Tax’) has been considered. Households receiving Housing Benefit were more likely to be undersized, suggesting that the policy to withdraw housing benefits from these households may be misguided.     

Copper accumulation in soils from two different‐aged apricot orchards in Central Otago,New Zealand

In recent years there has been a move in New Zealand to convert small, uneconomic orchards to other agricultural uses. Overseas research has demonstrated that copper from fungicide sprays often accumulates in the soils of orchards and can cause certain problems for plant growth and livestock. To date, no assessments appear to have been made of the degree of copper accumulation in such older orchards in New Zealand. This study presents the results of an assessment of two well‐established apricot orchards in the Central Otago region of South Island, New Zealand.

Two aspects of the results are surprising. The first is the relatively low levels of copper in the soil when compared with results from another orchard in the region. That orchard is 18 years old and mean soil copper has already reached 100.0 μg/g, indicating a much faster rate of accumulation than in the two orchards in the current study. The second unexpected result is that the younger orchard has a significantly higher level of copper than the older orchard. Reasons for these findings are discussed in relation to apparent differences in soil properties.     

Overheating in Scotland: contributing factors in occupied homes

ABSTRACT

There is growing awareness of the overheating risks in new-build properties in the UK. However, this tends to be considered a problem principally for the southern regions in the UK, only becoming a serious issue in the north of England in the medium-term and in the long-term for Scotland. This notion tends to be largely predicated upon climate change predictions, differences in latitude and summer air temperatures. This paper describes the results from Building Performance Evaluation (BPE) studies over a two-year period from 26 occupied new-build homes across Scotland which demonstrated incidences of overheating. Results suggest that low-energy buildings are susceptible to overheating despite northerly latitudes, with 54% of houses studied overheating for more than six months annually, and 27% of homes overheating for less than 10% of the year. Evidence indicated that commonly used prediction tools do not appear to anticipate overheating adequately. This paper maps common overheating causes due to design and the role of occupants, identifying the risks due to the regulatory system, prediction and procurement processes, and design and construction. A common finding was that design and occupancy factors appear to have a greater impact on overheating more than location and climatic factors.