Phosphorus-doped silicon nanoparticles as high performance LIB negative electrode

Journal of Materials Science - Silicon is getting much attention as the promising next-generation negative electrode materials for lithium-ion batteries with the advantages of abundance, high...     

反坦克导弹用热电池研究进展

反坦克导弹作为击毁坦克和其他装甲目标的武器装备,在国家安全领域具有重要地位.热电池作为反坦克导弹的能源系统,对导弹功能实现具有重要意义.围绕反坦克导弹用热电池快激活和瞬时高比功率技术,结合热电池电化学材料体系发展历史、现状,探讨了提升快激活能力,提高瞬时比功率输出能力的技术,并对技术发展趋势进行了展望.     

基于JESD204B协议高速并行8 bit/10 bit解码电路设计

提出了一种高速低延时8 bit/10 bit解码电路结构,采用四路并行通道同时处理输入数据,每一路具有K码检测、输入数据查错功能,能够在输入四路10 bit数据后的一个时钟周期内正确完成解码.所设计的解码电路通过搭建的通用验证方法学系统完成系统级功能验证,并基于65 nm工艺库进行综合、布局和布线,解码电路的面积为1 449 μm2.后仿真结果显示,解码电路的最高工作频率达415 MHz,四路可支持最高16.6 Gibit/s的串行数据传输速率,满足JESD204B协议标准推荐的最高传输速率12.5 Gibit/s的要求.将该解码电路用于支持JESD204B协议的高速数模转换器电路中,经测试,其传输速率最高达10.5 Gibit/s.     

极限工况下的管网“互联互通”改进方案

在全国天然气管道“主干互联、区域成网”(以下简称“互联互通”)基础格局逐渐形成的背景下,天然气管网规模日益扩大、管道分支和气源增加,并且分布不集中、输送方向可变,使得输气方案更加灵活,可以更好地解决某些地域的供气紧张问题;但受现有站场和设备的限制,暂不能满足某些多线组合极限工况,使得“互联互通”的初衷难以全部实现。为了使得现有的各输气干线在实现“互联互通”之后可以满足更多的多线组合工况,在分析“互联互通”背景下M管网工况变化的基础上,研发了可以进行水力仿真和压气站方案制订的计算软件,并对3种极限工况下的不同输气量情况进行了可行性试算,进而基于试算结果提出了相应的管网改进建议。研究结果表明:(1)经验证,软件计算误差满足要求;(2)在M管道某处增设压气站或在某些输气站场配置压缩机组;(3) M管网改进调整后,可以完成大部分的多线组合极限工况,真正实现“互联互通”的输气方案。结论认为,该研究成果有助于推进全国天然气管网早日实现“互联互通”。     

Formation of Uniform Water Microdroplets on Wrinkled Graphene for Ultrafast Humidity Sensing

Portable humidity sensors with ultrafast responses fabricated in wearable devices have promising application prospects in disease diagnostics, health status monitoring, and personal healthcare data collecting. However, prolonged exposures to high‐humidity environments usually cause device degradation or failure due to excessive water adsorbed on the sensor surface. In the present work, a graphene film based humidity sensor with a hydrophobic surface and uniformly distributed ring‐like wrinkles is designed and fabricated that exhibits excellent performance in breath sensing. The wrinkled morphology of the graphene sensor is able to effectively prevent the aggregation of water microdroplets and thus maximize the evaporation rate. The as‐fabricated sensor responds to and recovers from humidity in 12.5 ms, the fastest response of humidity sensors reported so far, yet in a very stable manner. The sensor is fabricated into a mask and successfully applied to monitoring sudden changes in respiratory rate and depth, such as breathing disorder or arrest, as well as subtle changes in humidity level caused by talking, cough and skin evaporation. The sensor can potentially enable long‐term daily monitoring of breath and skin evaporation with its ultrafast response and high sensitivity, as well as excellent stability in high‐humidity environments.     

“电网一张图”时空信息管理系统

文章首先总结了电力企业信息管理系统的现状,提出了多源信息管理系统融合集成的邦联、子集和完全融合3种方式,分析了3种方式的优缺点,以建设企业"互联网搜索"型数字引擎为目标,提出了融合基于本体的图数据库建模,多维关联与路径因果分析,和人机共生互动可视化决策于一体的企业信息管理系统技术发展趋势;在系统分析目前正在快速发展的图数据库技术与传统关系数据库之间的本质区别基础上,总结原创的电力图计算平台技术的特点;在此基础上讨论"电网一张图"在建设能源互联网时空信息管理平台数据关联索引图中的核心作用,提出了支持能源互联网建设的"电网一张图"时空信息管理系统的技术架构与特点,最后总结"电网一张图"时空信息管理系统在提高电网安全运行水平、提升客户服务水平、增强清洁能源消纳水平、改善经营绩效水平、以及为综合能源服务和建设能源生态等提供数据服务方面的广阔应用场景。     

时效工艺对纳米结构2297铝锂合金力学性能与微观组织的影响

采用535 ℃×2 h固溶制度,将热锻态2297铝锂合金固溶水淬后冷轧,冷轧压下量为95%,然后将轧制样品在不同温度(120~190 ℃)和时间(0~80 h)范围内进行时效处理。采用拉伸、扫描电镜(SEM)和透射电镜(TEM)等测试方法,分析时效温度和时间对铝锂合金组织与性能的影响。结果表明:时效前的大塑性变形能获得纳米结构组织,能促进T₁相均匀细小地析出,缩短合金达到峰时效的时间,最终成功制备了高强高塑性铝锂合金。在120~140 ℃温区内时效时,时效温度越高,达到峰时效的时间越短、强度越高。140 ℃达到峰时效时间缩短为40 h,此时合金的抗拉强度、屈服强度和伸长率分别为525 MPa、478 MPa和7.7%,主要强化相为细小的T₁相。在170~190 ℃温区内时效时,时效温度越高,达到峰时效的时间越短,但抗拉强度与屈服强度迅速下降。170 ℃时效8 h达到峰时效状态,此时合金的抗拉强度、屈服强度和伸长率分别是503 MPa、462 MPa和5.0%,主要强化相仍为T₁相,但已经明显粗化。     

不同改良措施对排土场土壤微形态影响的试验研究

以铁矿排土场废石土为研究对象,自制模型试验装置,设计4种基质改良方法,开展SEM检测实验,并应用IPP软件对SEM照片进行定量化分析,研究在不同改良措施下对铁矿排土场土壤微结构的影响。结果表明：单施3%有机肥土壤孔隙度为16%,与对照组排土场原矿土相比增加了60%。复合施用3%有机肥、掺拌30%的黄土的处理孔隙度达到最大33%。单施3%有机肥、5%有机肥对土壤大团聚体含量皆有显著的促进作用,复合施有机肥、掺拌黄土的处理与单施有机肥的处理对比,土壤大团聚体含量增加并不显著。各改良措施的MWD与FMD均随着土壤中大团聚体的含量增加而增加。     

In situ characterization of LiY(WO4)2 nanotubes for electrochemical energy storage

Here, LiY(WO₄)₂ nanotubes are prepared via a feasible electrospinning technique. This new anode material shows excellent electrochemical properties. The capacity loss of LiY(WO₄)₂ nanotubes is as low as 6.9% after 156 cycles, while bulk LiY(WO₄)₂ presents the capacity loss higher than 55.0%. Even after 600 long-life cycles, the capacity loss of the nanotubes is only 9%. It can be seen that the hollow structure with a rough surface and a porous morphology contributes to the improvement of electrochemical performance. Furthermore, online X-ray diffraction (XRD) method is firstly applied to understand the lithium ions insertion/extraction mechanism of LiY(WO₄)₂ nanotubes. It can be concluded that it is an asymmetrical two-phase reaction. A phase transformation from LiY(WO₄)₂ to Li₃Y(WO₄)₂ can be obviously seen from the in situ XRD during discharge process. While Li₂Y(WO₄)₂ appears as an intermediate phase with a reverse charge reaction. In addition, in situ XRD also demonstrates that LiY(WO₄)₂ nanotubes have surprised electrochemical reversibility. All the above results indicate that LiY(WO₄)₂ nanotubes can be expected to be anode candidate for rechargeable lithium ion batteries (LIBs).