反转构造的反转程度及其与油气聚集的关系

结合典型反转构造地震剖面，分析了断层型和褶皱型两类反转构造的反转程度，上下皆正断层型和向形褶皱型反转构造的反转程度轻微；上逆下正断层型和透镜形褶皱型反转构造的反转程度中等；上下皆逆断层型和背形褶皱型反转构造的反转程度强烈。分析了反转构造的反转程度与油气聚集的关系，处于轻微反转程度的上下皆正断层型反转和向形褶皱型反转，以及处于强烈反转程度的上下皆逆断层型反转和背形褶皱型反转不利于油气聚集；处于中等反转程度的上逆下正断层型反转和透镜形褶皱型反转类型有利于油气聚集成藏。     

光学材料的激光微加工研究进展与应用前景

综述了国内外在光学材料激光微加工方面的研究成果和应用状况，并展望了其发展前景。     

宽带放大器可靠性问题浅析

叙述了国产高频宽带放大器的质量和可靠性现状，详细介绍了这类产品的质量一致性检验、可靠性摸底试验和现场使用过程中出现的可靠性问题，用统计的方法得出了可靠性特征量，通过对失效样品的失效分析，总结出宽带放大器主要的失效模式和失效机理，并提出了消除和减少失效、提高宽带放大器可靠性的措施和建议。     

Grain Boundary Sliding in Fatigue of Pure Aluminum

The distributions of plastic strain near grain boundaries induced by fatigue loading were investigatedby the fiducial grid method in pure aluminum specimens, and the resulted grain boundary sliding(GBS) was systematically analysed. The results show that the strain field near a grain boundary isnonuniform. GBS is restricted by the junction of grain boundaries and causes discontinuities of bothdisplacement and strain. A peak value of shear strain was created in short-range area across the grainboundary. GBS plays an important role in cyclic softening and secondary hardening. The control fac-tor of GBS is the relative orientation between two grains and the macro orientation of the grainboundary rather than the ∑ value of the boundary.     

注射成形粘结NdFeB磁体:工艺·性能·应用

综合介绍了几种适于注射成形粘结NdFeB磁体的磁粉制备方法及特点；讨论了粘结剂、改性剂及磁场取向对注射成形NdFeB磁体最终磁性能的影响及其应用市场。在此基础上，指出了今后开展研究工作的方向。     

真空冷冻干燥技术在三七加工中的应用

介绍了真空冷冻干燥的基本原理，并据三七的特点，探讨三七真空冷冻干燥的工艺流程及特点，简要分析了三七冷冻干燥的前景。     

一种铁氧体移相驱动器专用集成电路

介绍了ＳＡ０１８铁氧体移相驱动器专用集成电路的工作原理，电路设计和实验结果。该电路的内部电路设计有双路激励驱动器，放大器，积分器和双路高速比较器等功能单元。将铁氧体移相器的激励驱动器和相位控制器融于一体，大大减少了铁氧体移相器的外围设计。     

The Effect of the Charge Fluctuation of Dust Parti-cles on Ion-acoustic Wave Excited Through Ionization Instability

The effect of the charge fluctuation of dust particles on ion acoustic wave (IAW) excited through ionization instability was investigated. The hydrodynamic equations and linear time-dependent perturbation theory served as the starting point of theory, by which the dispersion relation and growth rate of the IAW were given. By comparing the results with the case of constant dust charges, it was found that the charge fluctuation of dust particles reduces the instability of the wave mode.     

一种3V CMOS音乐集成电路的设计原理

介绍了一种数字式全定制音乐集成电路设计原理。对伪音阶发生器、节拍发生器等子电路作了较详细的叙述。采用这种原理可设计出单芯片驱动压电陶瓷和发光二极管的音乐集成电路，该电路无须外接电阻、电容，可存储数首歌曲；另外，还可设计出一种数字音频程控频率合成器，时钟为ｆ０时，可控频率范围为ｆ０２～ｆ０２Ｎ。     

Self-Organized Monitoring in Ad-Hoc Networks

We propose in this paper a self-organized monitoring architecture for mobile ad-hoc networks based on a selective scheme where subsets of nodes are managed. These nodes are determined based on their network behavior in order to favor subsets of well-connected nodes. The key idea is to relax the requirements of the management plane, and to use these manageable subsets to monitor the performance of the overall network. We therefore propose a new performance metric to be monitored, in order to estimate the capability of ad-hoc nodes to communicate end-to-end in the network. Extensive simulations show how different parameters affect this metric.