Quantification of the Phase Transformation Kinetics in High Chromium Cast Irons Using Dilatometry and Metallographic Techniques

Metallurgical and Materials Transactions A - Further development of high chromium cast irons (HCCI) is based on tailoring the microstructure, necessitating an accurate control over the phase...     

Two‐dimensional modeling of an absorbing falling film in its development zone

This work presents the modeling of a vertical falling film expanding or shrinking from the inlet manifold. Considering a stationary approach, the film shape, the flow field and the absorption rate of an ambient gas are computed. For the flow field, one dimensional (1‐D) second‐order weighted integral boundary layer (WIBL) model is shown to accurately reproduce the film deformations. The gas transfer is then solved in a 2‐D predeformed domain to investigate the impact of the film deformations on the gas absorption rate. It is found that a significant mass transfer enhancement, as compared to a flat film, is obtained when the film is expanding due to the concomitant increase of the concentration gradient perpendicular to the interface. On the contrary, a slight hindrance of the mass transfer is observed when the film is shrinking, although it remains in this case very close to the flat film analytical solution. © 2017 American Institute of Chemical Engineers AIChE J, 63: 4370–4378, 2017     

Characterization method of thermomechanical parameters for microelectronic materials

Reliability of thermomechanical simulations is critically linked to the accuracy of the mechanical properties that govern the behaviour of structure, like Young's modulus (E) and coefficient of thermal expansion (CTE). For many cases, the values found in literatures are dealing with bulk properties without detailed information on temperature effects. To address such issues, it is necessary to measure the materials parameters as a function of temperature. The measurement of CTE is usually accomplished by evaluating the thermal deflections of a subjected material layer deposited on a substrate, providing that E is known at a specific temperature of experiment. A bilayer method, based on theory of elasticity, is proposed to determine both E and CTE for a given temperature with a good resolution. This paper presents the theoretical analysis, the design and process of the microsystem test structures, and the main calculation results.     

Use of DNA end joining activity of a Xenopus laevis egg extract for construction of deletions and expression vectors for HIV-1 Tat and Rev proteins

Blood gases were analyzed in dogs with pulmonary heartworm (HW) disease. The arterial oxygen tension (PaO2) in dogs with mild signs of dirofilariasis (mildly affected group, n = 48, 85.7 +/- 8.2 mmHg) and in dogs with signs of right heart failure (severely affected group, n = 13, 76.4 +/- 11.6 mmHg) was lower (p < 0.01) than in dogs without HW infection (HW-free group, n = 19, 91.5 +/- 7.3 mmHg). Only 2 dogs in the severely affected group had a PaO2 less than 60 mmHg. The arterial carbon dioxide tension (PaCO2, p < 0.01) and mixed venous O2 (p < 0.01) and CO2 (p < 0.01) tensions were lower, and alveolar-arterial oxygen difference (AaDO2, p < 0.01) was greater in the severely affected group than in the HW-free and mildly affected groups. Arterial pH and bicarbonate (HCO3-) concentrations were lower (p < 0.01) in both affected groups than in the HW-free groups. The anion gap level was not different among the 3 groups. Serum lactic acid level in the severely affected group was higher (p < 0.01) than in the HW-free and mildly affected groups. However, a slightly higher serum lactic acid concentration was found only in 2 dogs of the severely affected group (3.84 mmol/l and 3.82 mmol/l). The PaO2 (r = -0.62) and AaDO2 (r = 0.66) correlated significantly (p < 0.01) with mean pulmonary arterial pressure. One week after HW removal, blood gases, pH and HCO3- concentration remained unchanged in the mildly affected group. In the severely affected group, blood gas values were the same, but pH and HCO3- concentration improved slightly.