Synergic effect of Sn-doped TiO2 nanostructures for enhanced visible light photocatalysis

Journal of Materials Science: Materials in Electronics - In the recent years, metal oxides have attracted more interest for researchers because of their applications in energy and...     

Three and one-dimensional hierarchical α-Fe2O3 nanostructures for photoelectrochemical water oxidation

Journal of Materials Science: Materials in Electronics - Herein, we report the synthesis of three-dimensional (3D) and one-dimensional (1D) hierarchical hematite (α-Fe2O3) nanostructures on...     

Simulation of driver fatigue monitoring via blink rate detection,using 65 nm CMOS technology

This paper proposes a system to detect and measure blink rate to determine fatigue levels. The method involved analysing specific frames to determine that a blink occurred, and then monitoring the time between successive blinks. The program was simulated in python using a Raspberry Pi Zero and a standard USB camera. For the blink rate detection block, a gate level schematic was implemented in Cadence software using 65 nm CMOS technology. The design was based around an asynchronous 6-bit based edge counter which was designed using D-flip-flops. The simulation calculated the average blink rate and compared this to the most recent blink rate. The outcome would determine if an alarm signal should be sent to the alarm. The system consumed 130 μA from a 1.2 V power supply.     

Impact of military type footwear and load carrying workload on postural stability

Postural stability has been shown to be impacted by footwear and task performed. This study analysed the impact of two military footwear, standard boot (STB) and minimalist boot (MTB) on postural stability, before (PRE) and after (POST) a load carriage task. Sixteen participants were tested for postural stability using sensory organisation and motor control tests on Neurocom Equitest?. Postural sway, equilibrium scores and postural latencies were analysed using a two-factor repeated measures ANOVA: boot type (STB-MTB)?×?time (PRE-POST) load carriage task. Significantly greater postural sway variables, lower balance scores and slower postural latencies were seen in STB and POST load carriage conditions (p?<?.05). The results suggest that MTB exhibited greater balance compared to STB in balance conditions that rely on somatosensory feedback and that balance is lowered after a load carriage task. Decrements in postural stability could be attributed to boot design characteristics and muscular exertion due to the load carriage task.

Practitioner Summary: Maintaining optimal postural stability is crucial in military. Impact of military footwear types and load carriage task on postural stability are addressed. Findings provide footwear design and physical exertion implications on postural stability leading to potential interventions that reduce postural stability decrements; thereby, reducing potential falls and fall related injuries.     

Investigation of thermal residual stresses during laser ablation of tantalum carbide coated graphite substrates using micro-Raman spectroscopy and COMSOL multiphysics

Laser ablation of high-temperature ceramic coatings results in thermal residual stresses due to which the coatings fail by cracking and debonding. Hence, the measurement of such residual stresses during laser ablation process holds utmost importance from the view of performance of coatings in extreme conditions. The present research aims at investigating the effect of laser parameters such as laser pulse energy, scanning speed and line spacing on thermal residual stresses induced in tantalum carbide-coated graphite substrates. Residual stresses were measured using micro-Raman spectroscopy and correlated with Raman peak shifts. Transient thermal analysis was performed using COMSOL Multiphysics to model the single ablated track and residual stresses were reported at low, moderate and high pulse energy regimes. The results showed that the initial laser conditions caused higher tensile residual stresses. Moderate pulse energy regime comprised higher compressive residual stresses due to off centre overlapping of the laser pulses. Higher pulse energy (250 μJ), higher scanning speed (1000 mm/s) and moderate line spacing (20 μm) caused accumulation of tensile residual stresses during the final stage of laser ablation. The deviation of experimental residual stresses from COMSOL numerical model was attributed to unaccounted additional stresses induced during thermal spraying process and deformation potentials in the numerical model.     

Xanthohumol for Human Malignancies: Chemistry,Pharmacokinetics and Molecular Targets

Xanthohumol (XH) is an important prenylated flavonoid that is found within the inflorescence of Humulus lupulus L. (Hop plant). XH is an important ingredient in beer and is considered a significant bioactive agent due to its diverse medicinal applications, which include anti-inflammatory, antimicrobial, antioxidant, immunomodulatory, antiviral, antifungal, antigenotoxic, antiangiogenic, and antimalarial effects as well as strong anticancer activity towards various types of cancer cells. XH acts as a wide ranging chemopreventive and anticancer agent, and its isomer, 8-prenylnaringenin, is a phytoestrogen with strong estrogenic activity. The present review focuses on the bioactivity of XH on various types of cancers and its pharmacokinetics. In this paper, we first highlight, in brief, the history and use of hops and then the chemistry and structure–activity relationship of XH. Lastly, we focus on its prominent effects and mechanisms of action on various cancers and its possible use in cancer prevention and treatment. Considering the limited number of available reviews on this subject, our goal is to provide a complete and detailed understanding of the anticancer effects of XH against different cancers.     

Process-induced variability modeling of subthreshold leakage power considering device stacking

The dominance of leakage currents in circuit design has been impelled by steady downscaling of MOSFET into nanometer regime, and has become a significant component of total IC power dissipation. The issue is further aggravated with the inability to gauge the tolerance of process parameters around their nominal value. Consequently, the drive to improve the static power prediction has enticed accurate and reliable modeling of leakage current, specifically for ultralow power applications. In contrast to gate- and band-to-band-tunneling leakages, subthreshold leakage exhibits high susceptibility to process variations and hence has been considered for variability modeling. Fluctuations in the device electrical and geometry parameters result in a wider distribution of subthreshold leakage current. Hence, taking into account stacking effect, an analytical variability model to estimate subthreshold leakage power in subthreshold circuits, in the presence of threshold voltage variations is proposed. Further, the impact of threshold voltage variability on subthreshold leakage power is modeled in conjunction with simultaneous variations in gate length and width. The leakage power variability is characterized by model-generated distributions obtained using Monte Carlo analysis and validated against SPICE simulations. The proposed model is about 700 computationally faster than SPICE simulations with mean error being less than 0.19%.     

An optimized hybrid deep learning model using ensemble learning approach for human walking activities recognition

The Journal of Supercomputing - Recent advancements in edge computing devices motivate us to develop a sustainable and reliable technique for multiple gait activities recognition using wearable...     

A single-phase algorithm for mining high utility itemsets using compressed tree structures

Mining high utility itemsets (HUIs) from transaction databases considers such factors as the unit profit and quantity of purchased items. Two-phase tree-based algorithms transform a database into compressed tree structures and generate candidate patterns through a recursive pattern-growth procedure. This procedure requires a lot of memory and time to construct conditional pattern trees. To address this issue, this study employs two compressed tree structures, namely, Utility Count Tree and String Utility Tree, to enumerate valid patterns and thus promote fast utility computation. Furthermore, the study presents an algorithm called single-phase utility computation (SPUC) that leverages these two tree structures to mine HUIs in a single phase by incorporating novel pruning strategies. Experiments conducted on both real and synthetic datasets demonstrate the superior performance of SPUC compared with IHUP, UP-Growth, and UP-Growth+ algorithms.