Radon and moisture impacts from interventions integrated with housing energy retrofits

Energy retrofits can reduce air exchange, raising the concern of whether indoor radon and moisture levels could increase. This pre/post-intervention study explored whether simple radon interventions implemented in conjunction with energy retrofits can prevent increases in radon and moisture levels. Treatment homes (n = 98) were matched with control (no energy retrofits or radon intervention) homes (n = 12). Control homes were matched by geographic location and foundation type. t-tests were used to determine whether post-energy retrofit radon and moisture level changes in treatment homes significantly differed from those in control homes. The radon interventions succeeded in preventing statistically significant increases in first floor radon using arithmetic (p = 0.749) and geometric means (p = 0.120). In basements, arithmetic (p = 0.060) and geometric (p = 0.092) mean radon levels statistically significantly increased, consistent with previous studies which found that basement radon levels may increase even if first floor levels remain unchanged. Changes in infiltration were related to changes in radon (p = 0.057 in basements; p = 0.066 on first floors). Only 58% of the change in infiltration was due to air sealing, with the rest due to weather changes. There was no statistically significant association between air sealing itself and radon levels on the first floor (p = 0.664). Moisture levels also did not significantly increase.     

Food Additives Reducing Volatility of Antioxidants at Frying Temperature

At frying temperature, antioxidants are lost not only by reaction with radicals formed by oil oxidation but also by decomposition and evaporation before they are able to exert antioxidant activity. In this study, it was hypothesized that an additive that can bind or interact with an antioxidant could reduce volatility of the antioxidant at frying temperature. Three synthetic antioxidants, tert‐butylhydroquinone (TBHQ), butylated hydroxyanisole (BHA) and butylated hydroxytoluene (BHT), which have relatively high volatility, were used as antioxidants in this study to examine the hypothesis. Thermogravimetric analysis (TGA) experiments showed that all 22 additives tested in this study effectively reduced volatility of the antioxidants. An NMR study showed that signals of BHT shifted by addition of an additive, evidencing the interaction between the two substances in the chloroform solution. To examine the effect of these interactions on antioxidant activity, heating tests were conducted with soybean oil (SBO) containing 200 ppm antioxidants at 180 °C. Oxidation was monitored with ¹H NMR for loss of olefinic protons and bisallylic protons in SBO and with gel permeation chromatography (GPC) for polymerized triacylglycerols (PTAG). Improved antioxidant activity of the antioxidants were observed when combined with several additives tested in this study, and HPLC analysis showed that the antioxidants were effectively reserved by the additives in SBO during the heating process. The concentrations of the antioxidants retained in SBO were relatively well correlated with the antioxidant activity.     

Coagulation dynamics of fractal flocs induced by enmeshment and electrostatic patch mechanisms

The size and structure of flocs during floc formation were monitored for various coagulation mechanisms. Two distinctive mechanisms, namely, enmeshment and electrostatic patch, govern the dynamics of kaolin particles coagulation by polyaluminum chloride (PACl). They were investigated by small angle static light scattering (SASLS) and solid-state ²⁷Al NMR. In addition, a novel wet SEM (WSEM) was used in-situ to image the morphology of the aggregate in aqueous solution. Synthetic suspended particles were coagulated by two PACl products, a commercial product (PACl) and one laboratory product (PACl-E). The PACl-E contained more than 60% Al₁₃ while the PACl contained only 7% Al₁₃, with large percentage of colloidal Al. For coagulation by PACl at neutral pH and high dosage where the strong repulsion between particles occurs, the enmeshment ruled by reaction-limited aggregation (RLA) results in larger sweep flocs as well as higher fractal dimensional structure. For coagulation by PACl-E at alkaline pH and low dosage, the flocs were coagulated predominately by electrostatic patch with Al₁₃ aggregates. At such condition, it is likely that diffusion-limited aggregation (DLA) predominately rule PACl-E coagulation. The fractal dimension (D_s) values of PACl and PACl-E flocs formed at enmeshment and electrostatic patch increased with dosage, respectively. When breakage of flocs occurs, the breakage rate of PACl-E flocs is slower than that of sweep flocs. By WSEM imaging, the adsorption of spherical Al precipitates onto the particles was observed to form sweep flocs with a rough and ragged contour, while the PACl-E flocs were formed with a smooth and glossy structure.     

Short communication: The effect of calcium supplementation at calving on neutrophil function

Low total blood calcium concentration after calving has been demonstrated to be a risk factor for reduced neutrophil function. The objective of this study was to evaluate whether administration of an injectable calcium supplement product soon after calving increased neutrophil oxidative burst or phagocytosis capacity. Cows (n = 27) from 4 farms were blocked by parity and randomly assigned to receive either calcium gluconate (35% wt/vol) in combination with calcium glucoheptonate (10% wt/vol; Theracalcium, Vétoquinol Canada Inc., Lavaltrie, Quebec, Canada) or a placebo within 12 h after calving and again 24 h later. Each dose of 120 mL was injected subcutaneously over 2 sites. Total serum calcium concentration, neutrophil oxidative burst, and neutrophil phagocytosis capacity were measured from coccygeal blood samples before (time 0) and 72 h after first treatment. There was no difference between treatment groups in lactation number, total calcium concentration, oxidative burst, or phagocytosis at time of enrollment. There was no effect of treatment on oxidative burst or phagocytosis by neutrophils. This preliminary study does not support an effect of supplemental calcium to improve neutrophil oxidative burst or phagocytosis capacity of low-parity parturient cows.     

Solid Fat Content as a Substitute for Total Polar Compound Analysis in Edible Oils

The solid fat contents (SFC) of heated edible oil samples were measured and found to correlate positively with total polar compounds (TPC) and inversely with triglyceride concentration. Traditional methods for determination of TPC require a laboratory setting and are time and solvent intensive. Therefore, SFC analysis represents a viable user-friendly alternative to measuring total polar components in environments where low-resolution NMR may already be in use, for example, in quality assurance environments. The slope of SFC measurements versus time was also found to correlate with the oxidative stability index of the edible oils studied.     

Evaluation of curriculum to improve health professionals’ ability to manage age-related driving impairments

As our elderly population increases in proportion with respect to the rest of society, age-related driving impairments are increasing in importance as a public health concern. In this context, health professionals play an important role in identifying impaired drivers. This situation is complicated for two reasons: discussion of driving cessation is a sensitive topic for both health professionals and the elderly, and physicians have limited familiarity with the current American Medical Association (AMA) screening guidelines or mandated reporting laws.     

High-Temperature Decomposition of Fe- and Cr-Doped NiO Produced by a Novel Flame Spray Technique

A novel thick film technology has been developed for the manufacture of electric heating elements from partially oxidised Ni–Cr–Fe alloy powder. The sprayed films were a mixture of metallic alloys and Ni-based oxides. Electron microscopy and analysis were used to monitor the transformations in the films during subsequent heat treatment. In particular, it was found that homogeneous grains of Cr- and Fe-doped Ni-based oxides transformed into NiO grains containing numerous Ni-, Cr- and Fe-rich spinel particles with a typical size of 40 nm.     

The nanometre-scale physiology of bone: steric modelling and scanning transmission electron microscopy of collagen�Cmineral structure

The nanometre-scale structure of collagen and bioapatite within bone establishes bone''s physical properties, including strength and toughness. However, the nanostructural organization within bone is not well known and is debated. Widely accepted models hypothesize that apatite mineral (‘bioapatite’) is present predominantly inside collagen fibrils: in ‘gap channels’ between abutting collagen molecules, and in ‘intermolecular spaces’ between adjacent collagen molecules. However, recent studies report evidence of substantial extrafibrillar bioapatite, challenging this hypothesis. We studied the nanostructure of bioapatite and collagen in mouse bones by scanning transmission electron microscopy (STEM) using electron energy loss spectroscopy and high-angle annular dark-field imaging. Additionally, we developed a steric model to estimate the packing density of bioapatite within gap channels. Our steric model and STEM results constrain the fraction of total bioapatite in bone that is distributed within fibrils at less than or equal to 0.42 inside gap channels and less than or equal to 0.28 inside intermolecular overlap regions. Therefore, a significant fraction of bone''s bioapatite (greater than or equal to 0.3) must be external to the fibrils. Furthermore, we observe extrafibrillar bioapatite between non-mineralized collagen fibrils, suggesting that initial bioapatite nucleation and growth are not confined to the gap channels as hypothesized in some models. These results have important implications for the mechanics of partially mineralized and developing tissues.