Characterization of biogenic hydroxyapatite derived from animal bones for biomedical applications

In this work, the viability of producing biogenic hydroxyapatite from bio-waste animal bones, namely bovine (cow), caprine (goat) and galline (chicken), through a heat treatment process has been investigated. The animal bones were locally sourced, cleaned to remove collagen and subsequently heat treated in air atmosphere at different temperatures ranging from 600?°C to 1000?°C. From the range of sintering temperatures investigated, it was found that hydroxyapatite derived from bovine bone showed good thermal stability while those produced from caprine and galline bones exhibited phase instability with traces of tri-calcium phosphate (TCP) being detected after heat treatment beyond 700?°C. The porous nature of the bone samples can be observed from the microstructures obtained and supported by low relative density. Heating the bovine and caprine bones at selected temperatures yielded porous HA body, having hardness values that are comparable with human cortical bone. However, the sintered galline bone sample showed higher porosity levels and low hardness when compared to the other two bone types.     

Traffic video‐based intelligent traffic control system for smart cities using modified ant colony optimizer

Road traffic congestion is a serious problem in today's world and it happens because of urbanization and population growth. The traffic reduces the transport efficiency in the city, increases the waiting time and travel time, and also increases the usage of fuel and air pollution. To overcome these issues this papers propose an intelligent traffic control system using the Internet of Vehicles (IoV). The vehicles or nodes present in the IoV can communicate between themselves. This technique helps in determining the traffic intensity and the best route to reach the destination. The area of study used in this paper is Vellore city in Tamilnadu, India. The city map is separated into many segments of equal size and Ant Colony Algorithm (AOC) is applied to the separated maps to find the optimal route to reach the destination. Further, Support Vector Machine (SVM) is used to calculate the traffic density and to model the heavy traffic. The proposed algorithm performs better in finding the optimal route when compared to that of the existing path selection algorithms. From the results, it is evident that the proposed IoV‐based route selection method provides better performance.     

Effect of multi-ions doping on the properties of carbonated hydroxyapatite bioceramic

The effect of multi-ions (Mg²⁺, SiO₄^4-, Zn²⁺, Cu²⁺) doping on the properties of carbonated hydroxyapatite (CHA) prepared by a wet chemical method has been investigated. Different combinations of ions were doped into the CHA and the as-synthesized compacts were sintered at 900?°C prior to body characterization. It was found that regardless of ions doping, the lattice structure of the CHA was not disrupted. In addition, secondary phases were not detected for all the multi-ions doped samples. The XRD and FTIR results further confirmed the presences of a B-Type CHA in the sintered samples. The XRD analysis revealed that the lattice parameters (c/a ratio) increased with dopant addition and resulted in a smaller crystallite size. The FESEM examination also showed the presences of smaller grain size for the multi-ions doped CHA samples thus indicating that the doping was beneficial in suppressing grain coarsening in carbonated hydroxyapatite.     

Common Mode Voltage Reduction Using 3D-SVPWM for 3-level CI-NPC Inverter with Hybrid Energy System

This paper elucidates Common Mode Voltage (CMV) reduction in transformerless 3-phase 3-level Coupled Inductor Neutral Point (CI-NPC) Clamped Inverter with Hybrid Energy System. The three dimensional Space Vector Pulse Width Modulation (3D-SVPWM) with Nearest State Vector (NSV) is implemented to reduce the CMV by proper selection of medium, large and small vectors in 3D cubic space region. This NSV scheme in addition to CMV reduction, reduces the capacitor voltage balancing issues and minimizes switching losses. The proposed control provides full utilization of dc link voltage with reduced harmonics. This 3-level CI-NPC inverter is energized by hybrid energy source which includes photovoltaic system and wind energy system. The results obtained for the proposed scheme through simulation and experimental setup is compared with the conventional 2D-SVPWM and 3D-SVPWM scheme. From the compared results it is evident that the proposed scheme reduces CMV to a larger extent than 2D and 3D-SVPWM control. The simulation and experimental results are verified using matlab-simulink and FPGA-Spartan-6 controller respectively.     

Analysis of Frequency,Intensity, and Interference of Discomfort in Computerized Numeric Control Machine Operations

The introduction of Computerized Numeric Control (CNC) technology in manufacturing industries revolutionized the production process a few decades back. There are some health and safety problems associated with these machine operations, however. The main objectives of the present work is to study the health and safety issues associated with the CNC machines with respect to control and display, specifically to determine the frequency, intensity of discomfort, and its interference in operating different CNC machines as reported by the workers operating them. The postural discomfort associated with CNC machines was studied, and the frequency, intensity of discomfort, and interference of the level of discomfort with the participants' ability to work were recorded and analyzed. The study revealed that 20.5% of the operators reported discomfort 1 or 2 times, 25.4% experienced discomfort 3 to 4 times in a week, 37.7% had discomfort daily, and 16.4% reported discomfort several times a day. Discomfort was reported in all the body parts involved (lower back, neck, upper back, shoulder, and leg), but the highest discomfort scores were associated with the shoulder and arm region. Workers reporting discomfort several times a day also reported high mean discomfort scores. The study established that the frequency and intensity of the discomfort in all body parts is related to the position of the control panel and display. © 2012 Wiley Periodicals, Inc.     

Robust Exponential Stabilization Results for Impulsive Neutral Time-Delay Systems with Sector-Bounded Nonlinearity

In this paper, the problem of robust exponential stabilization analysis for nonlinear neutral systems with time-varying delays under impulsive control is addressed. Sufficient delay-dependent exponential stabilization results are derived in terms of linear matrix inequalities by constructing suitable Lyapunov–Krasovskii functional. The control gain matrices are designed using impulsive state-feedback control approach. Also, the nonlinear function is assumed to satisfy the sector-bounded condition which includes Lipschitz condition as a special case. Further numerical examples are provided to show the effectiveness of the derived results.     

An improved damage diagnostic technique based on Singular Spectrum Analysis and time series models

An approach to enhance the sensitivity of the damage index using the prediction errors of autoregressive – autoregressive exogenous models by augmenting Singular Spectrum Analysis (SSA) to detect and locate minor damage is presented. Numerical simulation studies are carried out by considering a simply supported beam with single and multiple cracks. An experimental study on a reinforced cement concrete beam has been carried out to validate the technique using different levels of damage. The studies emphasise that the SSA improves the sensitivity of the damage index for detection and also localisation, handling environmental/operational variability and measurement noise.     

Protein-lipid interactions and enzyme requirements for light subtype generation on cycling reconstituted surfactant

Surfactant convertase is required for conversion of heavy density (H) natural surfactant to light density (L) subtype during cycling in vitro, a technique that reproduces surfactant metabolism. To study mechanisms of H to L conversion, we prepared liposomes of dipalmitoylphosphatidylcholine (DPPC) and phosphatidylglycerol (PG), or the phospholipids (PL) in combination with either surfactant protein A (SP-A), surfactant protein B (SP-B), or both SP-A and SP-B. Phospholipids alone showed time-dependent conversion from heavy to light subtype on cycling in the absence of convertase, which was decreased by adding SP-B, but not SP-A, to phospholipids (p < 0.01 for PL+SP-B, or PL+SP-A+SP-B vs. PL, or PL+SP-A). The ultrastructure, surface activity, buoyant density, and L subtype generation on cycling PL+SP-A+SP-B with partially purified convertase or with phospholipase D were similar to those of natural TM. In conclusion, a reconstituted surfactant mimics the behavior of natural surfactant on cycling, and reveals that interaction of SP-B with phospholipids decreases L subtype generation. In addition, esterase/ phospholipase D activity is required for conversion of heavy to light subtype on cycling.     

A study of the response of open end and ring spun yarns to zinc chloride and sodium hydroxide

An investigation of the swelling behavior of open end and ring spun yarns in slack condition in 64.5% (w/w) aqueous zinc chloride and sodium hydroxide 22% (w/w) for different intervals ranging from 30 to 90 min is reported. The results show that the response of the yarns to the swelling agents is different in that the products treated with zinc chloride are found to possess higher strength and higher bending rigidities but low elongation. Swelling of yarns with sodium hydroxide has resulted in large increase in elongation. The other properties, namely, coefficient of friction and abrasion resistance, are found to be slightly higher than that of the yarns treated with sodium hydroxide. Degree of set of open end yarns is significantly higher than that of the ring spun yarns. Coefficient of friction and abrasion resistance of the zinc chloride treated yarn samples are found to be slightly higher than that of the sodium hydroxide treated samples.     

Improvement of tea leaves fermentation with Aspergillus spp. pectinase

The pectinase enzymes isolated from Aspergillus spp., A. indicus, A. flavus and A. niveus were used for fermentation of tea leaves. The enzymes were purified and characterized. The effect of both crude enzyme preparation and purified pectinase enzymes on the improvement of tea leaf fermentation were determined in terms of theaflavin, thearubigin, high polymerized substances, total liquor colour, dry matter content and total soluble solids of the tea produced. The crude enzyme preparations obtained from ethanol precipitation were found to be more effective in improving tea leaf fermentation than the purified pectinase enzymes.