Structural properties of nanocomposites based on resole-type phenol-formaldehyde oligomers and detonation nanodiamonds

Using the methods of infrared spectroscopy (IRS) and X-ray photoelectron spectroscopy (XPS), it was shown that short-term high-energy machining of detonation nanodiamonds (DND) leads to structural changes in the crystal structure and functional composition of the surface layer on particles. The possibility of spontaneous formation for stable colloidal systems with a narrow size distribution of mechanically activated DND in phenol-formaldehyde oligomers (PFO) was established. By molecular spectroscopy it was revealed that π → π* interactions of the aromatic rings of PFO are caused by orientational phenomena as a result of hydrogen bonds between an activated DND surface and functional groups of PFO. The effect of DND concentration on the curing reaction parameters ofpsgr the phenol-formaldehyde oligomer was determined by differential scanning calorimetry (DSC). The concentration effect of mechanically activated nanodiamonds on the physical and mechanical characteristics of a composite material based on phenol-formaldehyde binder and polyamide paper (Nomex) was studied. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48582.     

Numerical modelling of isothermal release and distribution of helium and hydrogen gases inside the AIHMS cylindrical enclosure

Hydrogen is a highly flammable gas and accidental release in confined space can pose serious combustion hazards. Numerical studies are required to assess the formation of flammable hydrogen cloud within confined spaces. In the present study, numerical investigations on the release of helium and hydrogen gases as high-velocity jets and their subsequent distribution inside an unventilated cylindrical enclosure (AIHMS facility) has been carried out as a first step towards numerical studies on hydrogen distribution in confined spaces for safety assessments. Experimental data for jet release of helium at volume Richardson number 0.1 and subsequent distribution has been used as benchmark data. Sensitivity studies on the influence of grid sizes, time-steps and turbulence models are performed. The performance of the validated numerical model is evaluated using statistical performance parameters. Similarity relations are used to determine input parameters for hydrogen jet for corresponding experimental data with helium jets. Finally, the mixing and flammability aspects of hydrogen distribution inside the enclosure are studied using four numerical indices that quantify mixing and deflagration potential of a distribution. It is concluded that the helium experiments can be used for validation of numerical models for hydrogen safety studies and any one of the similarity relationships, viz., equal buoyancy, equal volumetric flow, or equal concentration can be used for assessing the behaviour of hydrogen release and distribution within confined spaces.     

Rayleigh–Benard convection in water-based alumina nanofluid: A numerical study

Rayleigh–Benard (R-B) convection in water-based alumina (Al₂O₃) nanofluid is analyzed based on a single-component non-homogeneous volume fraction model (SCNHM) using the lattice Boltzmann method (LBM). The present model accounts for the slip mechanisms such as Brownian and thermophoresis between the nanoparticle and the base fluid. The average Nusselt number at the bottom wall for pure water is compared to the previous numerical data for natural convection in a cavity and a good agreement is obtained. The parameters considered in this study include the Rayleigh number of the nanofluid, the volume fraction of alumina nanoparticle and the aspect ratio of the cavity. For the Al₂O₃/water nanofluid, it is found that heat transfer rate decreases with an increase of the volume fraction of the nanoparticle. The results are demonstrated and explained with average Nusselt number, isotherms, streamlines, heat lines, and nanoparticle distribution. The effect of nanoparticles on the onset of instability in R-B convection is also analyzed.     

Adaptive Immune Responses in a Multiple Sclerosis Patient with Acute Varicella-Zoster Virus Reactivation during Treatment with Fingolimod

Fingolimod, an oral sphingosine 1-phosphate (S1P) receptor modulator, is approved for the treatment of relapsing forms of multiple sclerosis (MS). The interference with S1P signaling leads to retention particularly of chemokine receptor-7 (CCR7) expressing T cells in lymph nodes. The immunological basis of varicella zoster virus (VZV) infections during fingolimod treatment is unclear. Here, we studied the dynamics of systemic and intrathecal immune responses associated with symptomatic VZV reactivation including cessation of fingolimod and initiation of antiviral therapy. Key features in peripheral blood were an about two-fold increase of VZV-specific IgG at diagnosis of VZV reactivation as compared to the previous months, a relative enrichment of effector CD4+ T cells (36% versus mean 12% in controls), and an accelerated reconstitution of absolute lymphocytes counts including a normalized CD4+/CD8+ ratio and reappearance of CCR7+ T cells. In cerebrospinal fluid (CSF) the lymphocytic pleocytosis and CD4+/CD8+ ratios at diagnosis of reactivation and after nine days of fingolimod discontinuation remained unchanged. During this time CCR7+ T cells were not observed in CSF. Further research into fingolimod-associated VZV reactivation and immune reconstitution is mandatory to prevent morbidity and mortality associated with this potentially life-threatening condition.     

Social class, sense of control, and social explanation.

Lower social class is associated with diminished resources and perceived subordinate rank. On the basis of this analysis, the authors predicted that social class would be closely associated with a reduced sense of personal control and that this association would explain why lower class individuals favor contextual over dispositional explanations of social events. Across 4 studies, lower social class individuals, as measured by subjective socioeconomic status (SES), endorsed contextual explanations of economic trends, broad social outcomes, and emotion. Across studies, the sense of control mediated the relation between subjective SES and contextual explanations, and this association was independent of objective SES, ethnicity, political ideology, and self-serving biases. Finally, experimentally inducing a higher sense of control attenuated the tendency for lower subjective SES individuals to make more contextual explanations (Study 4). Implications for future research on social class as well as theoretical distinctions between objective SES and subjective SES are discussed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Bubble columns for condensation at high concentrations of noncondensable gas: Heat‐transfer model and experiments

Carrier gas based thermodynamic cycles are common in water desalination applications. These cycles often require condensation of water vapor out of the carrier gas stream. As the carrier gas is most likely a noncondensable gas present in very high concentrations (60–95%), a large additional resistance to heat transfer is present. It is proposed to reduce the aforementioned thermal resistance by condensing the vapor–gas mixture in a column of cold liquid rather than on a cold surface using a bubble column heat exchanger. A theoretical predictive model for estimating the heat‐transfer rates and new experimental data to validate this model are described. The model is purely physics based without the need for any adjustable parameters, and it is shown to predict heat rates within 0 to ?20% of the experimental values. The experiments demonstrate that heat‐transfer rates in the proposed device are up to an order magnitude higher than those achieved in existing state‐of‐the‐art dehumidifiers. © 2012 American Institute of Chemical Engineers AIChE J, 59: 1780–1790, 2013     

Investigation of Bubble Behavior in Subcooled Flow Boiling of Water in a Horizontal Annulus Using High-Speed Flow Visualization

Experiments have been carried out to study bubble behavior in subcooled flow boiling of water in a horizontal annulus at mass fluxes from 400 to 1200 kg/m²-s, heat fluxes from 0.1 to 1 MW/m², and pressures varying from 1 to 4 bar using high-speed visualization methods. National Instruments Labview IMAQ Vision Builder automated image-processing software was used to analyze the images obtained by high-speed visualization to obtain bubble size and bubble density. The parametric effects of pressure, mass flux, and heat flux on bubble behavior have also been brought out. Experimental results were validated by comparing with the predicted bubble sizes by using the Zeitoun and Shoukri (1996) correlation and were found to be in good agreement. It was found that bubble behavior is significantly affected by mass flux of working fluid and applied heat flux, whereas pressure of working fluid influences the bubble formation process indirectly.     

Determination of oxidizing anions in explosive mixtures by phase transfer

Inorganic oxidizing agents are used in various explosive mixtures that are analysed by analytical chemists. Among them are dynamites, ANFO, black powder, match heads, pyrotechnical devices and home-made bombs. The crucial step in post explosion analysis is the extraction and purification of the explosive residues from the debris. A unique, fast and selective extraction technique for inorganic oxidizing agents is described in this paper. The debris are first extracted with water to yield an aqueous solution of the ions. Oxidizing anions such as nitrate and chlorate, are selectively transfered into the organic phase by the use of lipophilic quarternary ammonium cations. Other anions such as carbonate, sulphate and nitrite are not extracted into the organic phase under these conditions. The extracted anions are then identified by infra-red spectrometry and chemical spot tests.     

Multifactor,Sequentially Releasing Scaffolds for Tissue Engineering:Fabrication Using Solvent/Nonsolvent Sintering Technology

Biodegradable constructs, providing both mechanical support to growing tissues and timed release of biological agents, are highly desired in tissue engineering. This study aimed to develop a platform technology that responds to these challenges. Accordingly, we report herein on model systems in which microspheres of poly(suberic anhydride), containing all-trans retinoic acid (atRA), and poly(d,l -lactic acid-co-glycolic acid), containing bovine serum albumin (BSA), were co-sintered at room temperature, using a solvent/nonsolvent mixture. These scaffolds release about 60% of atRA and negligible amounts of BSA within the first five days, followed by slower and steady release of BSA. They have pores of 150–500 μm and a compressive modulus of 200 kPa. Myoblasts and fibroblasts were seeded on the loaded scaffolds and both showed enhanced proliferation rates. Based on sound thermodynamic principles of polymer science, this technology demonstrates an as yet unachieved degree of versatility. It allows for the tailoring of “intelligent” scaffolds that preserve the integrity of the incorporated agents and of advanced modalities to release various drugs in a scheduled manner.