The activation of furfuryl alcohol polymerization by oxygen and its enhanced mechanical properties

The effect of oxygen and additional oxygen providers on furfuryl alcohol polymerization was investigated through chemical analyses and mechanical evaluation. NMR, UV–vis, Fourier transform infrared, and gas chromatography–mass spectrometry (GC–MS) results suggested that atmospheric oxygen and the further addition of an oxygen source functioned as an activator for the entire network polymerization. Interestingly, the construction of a conjugated structure on the furan linear chain, which is key to three-dimensional cross-linking, also appears to be accelerated in the presence of oxygen. Furthermore, the introduction of oxygen providers into the curing system successfully enhanced the mechanical properties of the cured furan resin.     

Diffusion Magnetic Resonance Imaging-Based Biomarkers for Neurodegenerative Diseases

There has been an increasing prevalence of neurodegenerative diseases with the rapid increase in aging societies worldwide. Biomarkers that can be used to detect pathological changes before the development of severe neuronal loss and consequently facilitate early intervention with disease-modifying therapeutic modalities are therefore urgently needed. Diffusion magnetic resonance imaging (MRI) is a promising tool that can be used to infer microstructural characteristics of the brain, such as microstructural integrity and complexity, as well as axonal density, order, and myelination, through the utilization of water molecules that are diffused within the tissue, with displacement at the micron scale. Diffusion tensor imaging is the most commonly used diffusion MRI technique to assess the pathophysiology of neurodegenerative diseases. However, diffusion tensor imaging has several limitations, and new technologies, including neurite orientation dispersion and density imaging, diffusion kurtosis imaging, and free-water imaging, have been recently developed as approaches to overcome these constraints. This review provides an overview of these technologies and their potential as biomarkers for the early diagnosis and disease progression of major neurodegenerative diseases.     

Main‐chain smectic liquid crystalline polymer exhibiting unusually high thermal conductivity in an isotropic composite

The thermal conductivity (TC) of an isotropic composite comprising of a main‐chain smectic liquid crystalline PB‐10 polyester and 50‐μm‐sized roughly spherical magnesium oxide (MgO) particles is investigated. The increase in the composite TC with higher MgO fractions is steeper than that expected by Bruggeman's theory for the TC of a polydomain PB‐10 polyester (0.52 W m^?1 K^?1). When the filler content is larger than 30 vol %, the composite TC approaches a value that can be explained only if the polyester functions as a matrix with 1.0 W m^?1 K^?1, which is five times as high as those of isotropic common polymers (0.2 W m^?1 K^?1). Such an unusually high TC for a polymer matrix is attributed to some polymer lamellae that lie parallel to the particle surface and are stacked toward neighboring particles, thus creating effective heat paths between the particles and a continuous thermal network in a composite. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39896.     

Contribution of known endocrine disrupting substances to the estrogenic activity in Tama River water samples from Japan using instrumental analysis and in vitro reporter gene assay

To quantitatively characterize the substances contributing to estrogenic activity in river water, in vitro bioassay using MVLN cells and instrumental analysis using liquid chromatograph–mass spectrometer (LC/MS) or liquid chromatograph–tandem mass spectrometer (LC/MS/MS) were applied to river water extracts taken from various locations in the Tama River, Japan. Tama River water samples were extracted using solid phase extraction and the crude extracts were fractionated by high-performance liquid chromatography (HPLC) into 10 fractions. The sixth fraction contained nonylphenol (NP) and octylphenol (OP) at concentrations in the range of 51.6–147 and 6.9–81.9 ng/L, respectively (concentrations corresponding to the original sample volumes). No estrogenic activity, expressed as 17β-estradiol equivalents (E2-EQ_B), however, was observed in this fraction (<0.6 ng-E2eq/L). Instrumentally determined estrogenic activity (E2-EQ_C), which is the concentrations of NP and OP multiplied by their corresponding relative potency, was below the detection limit of the MVLN cell bioassay. Estrogenic activities were detected only in HPLC fraction nos. 7, 8 and 9. Estrone (E1), estradiol (E2) and bisphenol A (BPA) were detected in these fractions. Estriol (E3) and ethynylestradiol (EE2) were not detected (<0.2 ng/L) in these fractions. The calculated E2-EQ_C for BPA was below the detection limit of bioassay. The E2-EQ_C for E1 and E2 were on the same order as the estrogenic activity determined by the bioassay (E2-EQ_B). The ratios of E2-EQ_C and E2-EQ_B for E1 and E2 in the three factions collectively (nos. 7–9) were 0.49–0.97 and 0.29–1.12, respectively. Above results indicated that the major causal substances to the estrogenic activity in the Tama River were E1 and E2.     

Recognition and Excision Properties of 8‐Halogenated‐7‐Deaza‐2′‐Deoxyguanosine as 8‐Oxo‐2′‐Deoxyguanosine Analogues and Fpg and hOGG1 Inhibitors

Cellular DNA continuously suffers various types of damage, and unrepaired damage increases disease progression risk. 8‐Oxo‐2′‐deoxyguanine (8‐oxo‐dG) is excised by repair enzymes, and their analogues are of interest as inhibitors and as bioprobes for study of these enzymes. We have developed 8‐halogenated‐7‐deaza‐2′‐deoxyguanosine derivatives that resemble 8‐oxo‐dG in that they adopt the syn conformation. In this study, we investigated their effects on Fpg (formamidopyrimidine DNA glycosylase) and hOGG1 (human 8‐oxoguanine DNA N‐glycosylase 1). Relative to 8‐oxo‐dG, Cl‐ and Br‐deaza‐dG were good substrates for Fpg, whereas they were less efficient substrates for hOGG1. Kinetics and binding experiments indicated that, although hOGG1 effectively binds Cl‐ and Br‐deaza‐dG analogues with low K_m values, their lower k_cat values result in low glycosylase activities. The benefits of the high binding affinities and low reactivities of 8‐oxo‐dG analogues with hOGG1 have been successfully applied to the competitive inhibition of the excision of 8‐oxoguanine from duplex DNA by hOGG1.     

Structure,transport properties,and dielectric properties of lactic acid/pyruvic acid aqueous solution in a biofuel cell: A molecular simulation study

Molecular dynamics (MD) simulation of lactic acid (L‐acid) and pyruvic acid (P‐acid) in a physiological salt solution has been performed, which is used as the electrolyte in a sort of biofuel cell working on a human skin. The structure, frequency distribution of molecules, dielectric properties, rotational correlation functions, and diffusion coefficients have been calculated. The anomalous behavior of dielectric constants for the lower concentration of L‐acid and P‐acid has been obtained from MD. The anomalous dielectric constant is discussed in relation with the various physical properties of the solution including the life time of the interaction in the solution. MD results suggest that the anomalous behavior is supposed to be attributed to the difference of interactions between ions in the lower and higher concentration region. POLYM. ENG. SCI., 59:2474–2478, 2019. © 2019 Society of Plastics Engineers     

Synthesis of New Pb-Based 1222 Cuprates Containing Phosphorus, (Pb0.75P0.25)Sr2(RE2–x–y Ce x Sr y )Cu2O z (RE = Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm, Yb, and Y)

New Pb-based 1222 cuprates containing phosphorus have been synthesized in the (Pb_0.75P_0.25)Sr₂- (RE_2–x–y Ce _x Sr _y )Cu₂O _z (RE = Nd, Sm, Eu, Gd, Dy, Ho, Er, Tm, Yb, and Y) systems. The almost-single phase samples are obtained for 0.5≤x≤1.0 and y=0.1 in the cases of RE = Nd, Dy, Ho, Er, Tm, Yb and Y, while for 0.3≤x≤1.0 and y=0.1 in the cases of RE = Sm, Eu and Gd. The samples crystallize in a tetragonal lattice, the lattice parameters a and c are decreasing with the decrease of the ionic radius of the RE element. Even after annealing under 143 atm O₂ atmosphere at 400 °C, almost all the samples with the common values x=0.5 and y=0.1 are semiconductors with a transport process followed by three-dimensional variable range hopping. However, the samples of RE = Sm, Eu and Gd, which are of almost single 1222 phase, even for x=0.3 and y=0.1, show superconductivity with the onsets at about 25 K, 20 K and 22 K, respectively. Through this study, we find very important procedure for discovery of new superconducting 1222 compound.     

Augmented reality-based block piling game with superimposed collapse prediction

Understanding what cannot be seen is difficult. Physical behavior can be explained on the basis of physical theories even if the behavior cannot be observed. Explanation of what is physically happening in the real world would become easy, however, if annotations were superimposed on the real objects. Herein, the authors demonstrate how an understanding of a physical event can be facilitated by overlapping a real-world situation with a simulation that predicts a future state. This idea is demonstrated in a game application in which a player stacks blocks into a pile until it collapses. In general, it is easy to estimate whether a block on the edge of a table will fall or not. However, it is more difficult to predict whether a stack of many blocks will collapse, and in what manner the stack will collapse. Even though previous research has demonstrated that the problem of how two-dimensionally stacked blocks collapse can be reduced to solving a sequence of convex quadratic programs, algorithms for convex quadratic programs require massive computational resources. Hence, the authors developed a fast and new algorithm based on a linear program. The proposed algorithm realizes real-time simulation based on physics that superimposes predicted collapse. The block that is predicted to fall is superimposed on the real block with a lit background projection. The system was evaluated in an experiment, and superimposed augmented reality annotation was observed to be efficient. The system was also demonstrated in game contests and received positive feedback and comments.     

Efficient electron transport in 4,4′-bis[N-(1-napthyl)-N-phenyl-amino] biphenyl and the applications in white organic light emitting devices

The electron transport capability of 4,4′-bis[N-(1-napthyl)-N-phenyl-amino] biphenyl (α-NPD) was investigated by fundamental physical measurements named as current–voltage (I–V) electrical property evaluation and displacement current measurement (DCM). In electron-dominated devices, the I–V characteristics of α-NPD were similar as that of (8-hydroxyquinolino) aluminum (Alq₃) owing to their same order of electron mobilities. The interface of Al/LiF and α-NPD was proven to be an Ohmic contact through the evaluation of I–V characteristics at low bias regime (<3 V). And an electron injection barrier, 0.21 eV, at Al/LiF/α-NPD was obtained by extrapolating the temperature dependent I–V curves. The electron transport behavior in α-NPD film was further confirmed by DCM evaluations. Furthermore, an efficient white organic light emission device was successfully fabricated by using α-NPD as hole transport layer and electron transport layer, respectively.     

Development of a simple capillary electrophoretic determination of glucosamine in nutritional supplements using in-capillary derivatisation with o-phthalaldehyde

A simple capillary electrophoretic method was developed for the determination of glucosamine using in-capillary derivatisation. Glucosamine in commercial products was extracted with purified water. The CE separation was achieved on an uncoated fused-silica capillary using a 20 mM borate buffer (pH 9.2) containing 5 mM o-phthalaldehyde (OPA) and 5 mM 3-mercaptopropionic acid (MPA) at 25 kV, followed by UV detection at 340 nm. The detector response was linear (r² > 0.999) in the concentration range 10–1000 μg/mL. The limit of detection (LOD) was 1.3 mg/g. Spiked glucosamine recoveries at 50 and 100 mg/g level were 95.1% and 104.3%, respectively. The method was applied to 16 commercial products. The concentrations of glucosamine were 109–705 mg/g, and the ratios of detected glucosamine content to the labelled value were 88.8–124%. No significant bias was observed (r² = 0.989, p < 0.01), between results obtained by the proposed CE method and an official colorimetric method (Japanese Health Food & Nutrition Food Association).