Effect of lysine incorporation,annealing and heat moisture treatment alone and in combination on the physico-chemical,retrogradation, rheological properties and in vitro digestibility of kithul (Caryota urens L.) starch

Physico-chemical, retrogradation, rheological properties and in vitro digestibility of lysine incorporated kithul starch modified by annealing, heat moisture treatment and its combinations were studied. LS-AHMT (annealed-heat moisture treated lysine incorporated kithul starch) exhibited lowest amylose leaching. LS-AHMT showed significantly (P ≤ 0.05) higher relative crystallinity. LS-ANS (annealed lysine incorporated kithul starch), LS-HMT (heat moisture treated lysine incorporated kithul starch) and LS-AHMT formed more weak gel by the effect of annealing, heat moisture treatment and its combination. LS-AHMT showed lowest pasting viscosities, G′ and G″ values among the modified kithul starch, which indicates its lower retrogradation properties. In vitro digestibility of kithul starch decreased after modifications and LS-ANS, LS-HMT and LS-AHMT showed significantly higher resistant starch content. The current study showed that annealing, heat moisture treatment and its combination on NS-LS (lysine incorporated kithul starch) effectively modified kithul starch properties.     

Gate All Around Dopingless Nanotube TFET Biosensor with Si0.5Ge0.5 – Based Source

Silicon - Through this paper, we discuss how Tunnel Field Effect Transistors can be utilized for the detection of biomaterials hence acting as a biosensor. The device proposed is a 3-D Doping less...     

A Monotone Iterative Technique for Nonlinear Fourth Order Elliptic Equations with Nonlocal Boundary Conditions

This paper proposes an accelerated iterative procedure for a nonlinear fourth order elliptic equation with nonlocal boundary conditions. First, an existence and uniqueness theorem is proved for the fourth order elliptic equation via the accelerated iterative procedure. To solve this problem numerically, a finite difference based numerical scheme is also developed in view of the main theorem. Theoretically, the monotone property as well as the convergence analysis are proved for both the continuous and discretized cases. The main result also supplements several algorithms for computing the solution of the fourth order elliptic integro-partial differential equation. The proposed scheme not only accelerates the scheme in the literature but also provides a greater flexibility in choosing the initial guess. The efficacy of the proposed scheme is demonstrated through a comparative numerical study with the recent literature. The numerical simulation confirms the theoretical claims too.     

Tuning of magnetic parameters in cobalt-polystyrene nanocomposites by reduction cycling

Cobalt nanoparticles were prepared by a reduction process inside polymer pores using CoSO₄·7H₂O and NaBH₄. A porous polymer network (sulphonated polystyrene) was chosen, as the template for the synthesis of elementary cobalt as high surface area cobalt nanoparticles are prone to oxidation. The preliminary studies reveal that the cobalt is first formed with an oxide protective layer outside and upon repeating the reduction cycles, inner pores of the polymers are opened which enhanced the yield of metallic cobalt. These high surface area cobalt nanoparticles embedded in a polymer are ideal for the synthesis of carbon nanotubes as cobalt can act as a catalyst for the nanotube synthesis. The concentration of cobalt can be tuned in this technique by repeating the cycling process.     

Porous composites of hydroxyapatite‐filled poly[ethylene‐co‐(vinyl acetate)] for tissue engineering

A novel porous composite of hydroxyapatite/poly[ethylene‐co‐vinyl acetate)] (HAP/EVA) having better osteointegration was fabricated by gas foaming technique using a non toxic gas blowing agent intended for bone replacement applications. Combined techniques of scanning electronic microscopy (SEM) and X‐ray microcomputed tomography (µCT) analysis showed that the pore size and pore volume of the porous composite decrease with the increase of HAP content. The gravimetric analysis evidenced for good pore interconnectivity within the porous composites. Energy dispersive X‐ray analysis (EDX) studies inveterated the even scattering of Ca ions which in turn indicate the uniform dispersion of HAP particles in the composites. The significant gradation in Ca ion concentration seen in EDX studies is well accordance with the amount of HAP loading in the sample. Mechanical properties of the porous composite having different HAP content were measured to have the compressive strength varying from 1.06 to 2.2 MPa. Non‐cytotoxic character of the material was observed by the cytocompatibility studies. The metabolic activity of L929 cells seeded on the material assessed by [3‐(4,5‐dimethylthiazol)‐2‐yl]‐2,5‐diphenyltertrazolium bromide (MTT) assay was found to be 91.8%. The adhesion and migration of the cells inside the pore walls were visualized by confocal microscopy. Copyright © 2010 Society of Chemical Industry     

Syngas formation in methane flames and carbon monoxide release during quenching

Following a recent investigation into chemi-ionization and chemiluminescence during gradual aeration of small, laminar methane flames, we proposed that partial oxidation products, or syngas constituents, formed in the pre-flame zone well below the luminous region, were responsible for the observed effects. We therefore map temperature, CO, and H₂ for geometries and conditions relevant to burners in domestic boiler systems, to assess the potential hazard of CO release into the ambient atmosphere, should any partial quenching occur. CO concentrations peaks of 5.5 volume % are recorded in the core surrounding the axis. Appreciable CO concentrations are also found in the absence of added air. Experiments on various burner port geometries and temperatures suggest that this is not due to air entrainment at the flame base but to diffusion from zones closer to the flame. Next, quenching surfaces such as grids, perforated plates and flame trap matrices of different metals are progressively lowered into the flame. To avoid flow line distortion, suction aspirates the quenched products. The highest emission rate occurs with the quenching plane some 4 mm above the burner; further lowering of the quenching surface causes flame extinction. The maximum CO release is close to converting 10% of the CH₄ feed, with some variation with quenching material. Expressing this potential release in terms of, e.g. boiler power, predicts a potentially serious hazard. Results of numerical simulations adequately parallel the experimental sampling profiles and provide insights into local concentrations, as well as the spatially resolved CO flux, which is calculated for a parabolic inlet flow profile. Integration across the stream implies, on the basis of the simulation, a possible tripling of the experimental CO release, were quenching simply to release the local gas composition into the atmosphere. Comparison with experiment suggests some chemical interaction with the quenching surface.     

Agent-based flight planning system for enhancing the competitiveness of the air cargo industry

In this paper, we propose a multi-agent-based framework to facilitate process automation for the air cargo industry. The focus is on enhancing two labor-intensive flight planning processes, namely cargo consolidation and equalization. By employing a software agent-based flight planning module, which is linked with an RFID-based warehouse management system, air cargo items received at a freight forwarder’s warehouse can be processed more efficiently and flight plans can be generated automatically. In particular, we employ agents equipped with simulated annealing optimization engines to handle the time-consuming tasks of optimization. By doing so, the latest flight plans can be generated more efficiently. The system has been evaluated experimentally by both simulated and real-life data. The results are encouraging. For example, operation steps that normally require over 30 minutes to complete can now be carried out in as quickly as two minutes, and produce a better solution.     

Patent search on biologics as potential biosimilar candidates

The biological pharmaceutical market is one of the fastest growing sectors in the health care business. Sales of biologic drugs reached $120 billion in 2008 [1] and the worldwide market of biologics continues to grow (IMS Health). As patents on first generation of biologic drugs, including epoetin, insulin granulocyte colony-stimulating factor (G-CSF) and interferon alpha, will soon expire, if they have not already, and patents on some of the second generation of biological drugs, such as antibody drugs, are going to be expire in the next few years, there exists a great opportunity in developing biosimilars, especially for large pharmaceutical companies which face great challenges in developing new blockbuster drugs. In the past few years, the United States, Canada, and Japan have debated or passed legislation on biosimilars with active involvement from top pharmaceutical and generic drug companies. The successful leader in this field will be the one that has the foresight and resources to position themselves well to gain in the future. So what are biosimilars? What are the technological differences between biosimilars and small molecule generic drugs? Finally, what are the considerations for biosimilars in terms of patent searching? An example on a biosimilar study is given here.     

Reevaluation of health risk benchmark for sustainable water practice through risk analysis of rooftop-harvested rainwater

Health risk concerns associated with household use of rooftop-harvested rainwater (HRW) constitute one of the main impediments to exploit the benefits of rainwater harvesting in the United States. However, the benchmark based on the U.S. EPA acceptable annual infection risk level of ≤1 case per 10,000 persons per year (≤10⁻⁴ pppy) developed to aid drinking water regulations may be unnecessarily stringent for sustainable water practice. In this study, we challenge the current risk benchmark by quantifying the potential microbial risk associated with consumption of HRW-irrigated home produce and comparing it against the current risk benchmark. Microbial pathogen data for HRW and exposure rates reported in literature are applied to assess the potential microbial risk posed to household consumers of their homegrown produce. A Quantitative Microbial Risk Assessment (QMRA) model based on worst-case scenario (e.g. overhead irrigation, no pathogen inactivation) is applied to three crops that are most popular among home gardeners (lettuce, cucumbers, and tomatoes) and commonly consumed raw. The infection risks of household consumers attributed to consumption of these home produce vary with the type of produce. The lettuce presents the highest risk, which is followed by tomato and cucumber, respectively. Results show that the 95th percentile values of infection risk per intake event of home produce are one to three orders of magnitude (10⁻⁷ to 10⁻⁵) lower than U.S. EPA risk benchmark (≤10⁻⁴ pppy). However, annual infection risks under the same scenario (multiple intake events in a year) are very likely to exceed the risk benchmark by one order of magnitude in some cases. Estimated 95th percentile values of the annual risk are in the 10⁻⁴ to 10⁻³ pppy range, which are still lower than the 10⁻³ to 10⁻¹ pppy risk range of reclaimed water irrigated produce estimated in comparable studies. We further discuss the desirability of HRW for irrigating home produce based on the relative risk of HRW to reclaimed wastewater for irrigation of food crops. The appropriateness of the ≤10⁻⁴ pppy risk benchmark for assessing safety level of HRW-irrigated fresh produce is questioned by considering the assumptions made for the QMRA model. Consequently, the need of an updated approach to assess appropriateness of sustainable water practice for making guidelines and policies is proposed.