基于数值模拟的挤压参数对AZ91镁合金管转角焊合室分流挤压焊合压力的影响规律研究

提出了一种镁合金管材转角焊合室分流挤压新工艺，该工艺可在有效延长焊合室长度和焊合时间前提下保证舌针刚度，从而保证管材尺寸精度，并且可通过转角剪切变形机制增加预焊合金属变形量和动态再结晶程度，从而有利于提高管材性能和焊缝焊合性能。利用有限元法揭示了转角焊合室分流挤压成形过程中金属的流动特征，应变分布特征和焊合室内的静水压力分布特征。结果表明，整个挤压过程无金属折叠，从而保证管材的表面质量；流经转角后预焊合金属变形量明显增加，有利于提高管材质量和焊缝质量。最后，研究揭示了坯料初始温度，挤压速度和模具转角对焊合室内静水压力的影响规律。结果表明，随着挤压速度的增加和模具转角的增大，转角焊合室内静水压力增大；随着坯料预热温度的增加，转角焊合室内静水压力呈先增大后减小的趋势。     

Smartphone-based bulky waste classification using convolutional neural networks

Multimedia Tools and Applications - The rapid urbanization process is escalating the urban waste problem, and ineffective management has worsened the issue, leading to severe consequences to the...     

Investigation on the anti-reduction mechanism of Ti4+ in high dielectric constant system Ca0.9La0.067TiO3 by doping with Al2O3

Ca_0.9La_0.067TiO₃ (abbreviated as CLT) ceramics doped with different amount of Al₂O₃ were prepared via the solid state reaction method. The anti-reduction mechanism of Ti⁴⁺ in CLT ceramics was carefully investigated. X-ray diffraction (XRD) was used to analyze the phase composition and lattice structure. Meanwhile, the Rietveld method was taken to calculate the lattice parameters. X-ray photoelectron spectroscopy (XPS) was employed to study the valence variation of Ti ions in CLT ceramics without and with Al₂O₃. The results showed that Al³⁺ substituted for Ti⁴⁺ to form solid solution and the solid solubility limit of Al³⁺ is near 1.11 mol%. Furthermore, the reduction of Ti⁴⁺ in CLT ceramics was restrained by acceptor doping process and the Q × f values of CLT ceramics were improved significantly. The CLT ceramic doped with 1.11 mol% Al₂O₃ exhibited good microwave dielectric properties: ε_r = 141, Q × f = 6848 GHz, τ_f = 576 ppm/°C.     

LaCr0.7Fe0.3O3-NiMn2O4 supported NTC composite ceramics with a sandwich-like structure

A novel sandwich-like structure was first proposed to adjust the electrical properties of NTC thermistors. The LaCr_0.7Fe_0.3O₃-NiMn₂O₄ supported composite ceramics with sandwich-like structure were initially fabricated via traditional solid-state reaction and uniaxial pressing methods, which allowed for the advantages of each component to be integrated into one material. X-Ray diffraction analysis indicates the ceramics mainly consisting of orthorhombic perovskite LaCr_0.7Fe_0.3O₃ and cubic spinel NiMn₂O₄ phases. SEM images manifest that the three layers adhered well to each other and exhibited high density. For electrical properties, the ρ_25°C was expanded to a wide range of 1182–110,233 Ω?cm and could be adjusted to the desired values by tuning the volume ratio of two basic layers, the B value was enhanced from 3358 K to 4167 K by NiMn₂O₄, and the thermal stability was improved by LaCr_0.7Fe_0.3O₃ with a resistance shift less than 0.55 % after annealing at 150 °C for 1500 h.     

Feature selection and hyper parameters optimization for short-term wind power forecast

Applied Intelligence - Accurate wind power forecasting plays an increasingly significant role in power grid normal operation with large-scale wind energy. The precise and stable forecasting of wind...     

Anchoring single Pt atoms on hollow Ag3VO4 spheres for improved activity towards photocatalytic H2 evolution reaction

The high cost of noble metal catalysts has been a great bottleneck for the catalyst industry. Using the noble metal at a single-atom level for catalytic applications could dramatically decrease the cost. The impacts of single Pt atoms on the photocatalytic performance of Ag₃VO₄ have been investigated and reported. In this report, single Pt atoms were anchored on the surface of Ag₃VO₄ (AVO) as a cocatalyst, and the resultant composite photocatalyst has been studied for photocatalytic H₂ production from water driven by visible light. The as-prepared AVO particles are hollow nanospheres in the monoclinic phase with a bandgap of 2.20 eV. The light absorption edge of AVO/Pt is slightly red-shifted compared to that of the pristine AVO, indicating more visible light absorption of AVO/Pt. The XPS peaks of Ag, V, and Pt exhibit a significant shift after AVO and Pt get into contact, suggesting the strong interaction between the surface Ag and V atoms, and single Pt atoms. After 3-h illumination, the photocatalytic H₂ evolution amount from AVO/Pt is improved up to 1400 μmol, which is 2.8 times that on the bare AVO. Such efficient photocatalytic H₂ evolution on AVO/Pt is still maintained after five reaction cycles. The better photocatalytic performance of AVO/Pt has been attributed to the more efficient visible light utilization and the lower interfacial charge transfer resistance, as demonstrated in the DRS and EIS spectra. The presence of the surface Pt atoms also leads to a higher amount of reactive radicals, which could efficiently promote the surface redox reactions.     

建筑工程地下停车场加固改造施工技术

在高层建筑中,地下工程很常见.在当今的建筑工程中,地下工程的施工包括大型设备房、机房、外墙套管等项目.由于高层建筑自身楼层较高,对建筑体的地下室的承载力要求较高,为了保证高层建筑的稳定性,需要对高层建筑地下室结构采取一定的加固措施.结合实例,主要分析了地下停车场工程新旧结构交接节点、地下室剪力墙、梁增大截面等加固改造施工技术,旨在帮助项目提高策划能力,增强过程管控能力,提升实施阶段的精细化管理水平.     

煤直接液化反应中分散相催化剂研究进展

煤直接液化工艺中催化剂作用十分重要,粒径小、分散性高的催化剂能够有效提升煤转化效率。将流动反应介质中小颗粒的固体催化剂命名为分散相催化剂,综述煤直接液化中常用的几种分散相催化剂,包括金属卤化物催化剂、过渡金属氧化物催化剂和铁系催化剂,提出可能的催化机理。