Quaternäre Metall/Metalloxid‐Katalysatoren als Wandkatalysatoren in Mikroreaktoren für Power‐to‐Gas‐Applikationen mittels kombinatorischer Hochdurchsatzmethoden

Catalysts of quaternary composition have been prepared and tested for the Sabatier process. For catalyst syntheses the following techniques have been used: sol‐gel methods, wet impregnation and incipient wetness impregnation. The Sabatier reaction was carried out at temperatures between 520 K and 670 K, pressures of 15 bar and 30 bar using a mixture H₂:CO₂ of 4:1. Activity screening of the microscale wall catalysts was performed by a custom‐built 10‐fold parallel gas‐flow microreactor setup in sequential operating mode. To analyze the gas phase compositions GC‐FID was used.     

Removal of Cr(VI) from Wastewater of the Tannery Industry by Functionalized Mesoporous Material

Silicon - A previously synthesized PABA-MCM-41 mesoporous material was used to remove Cr(VI) in leather samples. The optimization step was performed using univariate method for the following...     

Consistency,availability, and partition tolerance in blockchain: a survey on the consensus mechanism over peer-to-peer networking

Annals of Telecommunications - Blockchain is a disruptive technology that relies on the distributed nature of the peer-to-peer network while performing an agreement, or consensus, a mechanism to...     

Design of frameworks for self-adaptive service-oriented applications: A systematic analysis

Self-adaptive service-oriented Applications (Self-Apps) must be able to understand themselves or the environment in which they are executed, and propose solutions to meet changing conditions. The development of these applications is not a trivial task, since it encompasses issues from different research areas. Despite the importance of frameworks for Self-Apps, there is a lack of comprehensive analysis of how the design of such applications is performed, and regarding the standardization of concepts and coverage of minimum requirements for Self-Apps. The main contribution of this article is to present this comprehensive analysis, providing the state of the art for this subject. This analysis was built through a Systematic Mapping Study, based on a total of 65 studies, from which we identify the main attributes for Quality of Service (QoS), search strategies, and service management strategies employed in the design of frameworks for Self-Apps. The main aspects of requirements involved in the design of Self-Apps were pointed out to stakeholders. For example, these applications must implement a method for evaluation of QoS based on metrics. We also put forward the S-Frame, a modular solution that brings together the main features for the design of Self-Apps, and describe the main challenges concerning these applications.     

Microstructured Fischer‐Tropsch Reactor Scale‐up and Opportunities for Decentralized Application

Current projects focusing on the energy transition in traffic will rely on a high‐level technology mix for their commissioning. One of those technologies is the Fischer‐Tropsch synthesis (FTS) that converts synthesis gas into hydrocarbons of different chain lengths. A microstructured packed‐bed reactor for low‐temperature FTS is tested towards its versatility for biomass‐based syngas with a high inert gas dilution. Investigations include overall productivity, conversion, and product selectivity. A 60‐times larger pilot‐scale reactor is further tested. Evaporation cooling is introduced which allows to increase the available energy extraction from the system. From that scale on, an autothermal operation at elevated conversion levels is applicable.     

Development of mullite fibers and novel zirconia-toughened mullite fibers for high temperature applications

Polycrystalline mullite fibers and novel zirconia-toughened mullite (ZTM) fibers with average diameters between 9.7 and 10.3 μm containing 3, 7 and 15 wt.-% tetragonal ZrO₂ (ZTM3, ZTM7, ZTM15) in the final ceramic were prepared via dry spinning followed by continuous calcination and sintering in air. A shift in the formation of transient alumina phases and tetragonal ZrO₂ to higher temperatures with increasing amounts of ZrO₂ was observed. Concomitantly, the mullite formation temperature was lowered to 1229 °C for ZTM15 fibers. X-ray diffraction revealed formation of the desired tetragonal crystal structure of ZrO₂ directly from the amorphous precursor. Room temperature Weibull strengths of 1320, 1390 and 1740 MPa and Weibull moduli of 9.5, 7.1 and 9.0 were determined for mullite, ZTM3 and ZTM15 fibers, respectively. Average Young’s moduli ranged from 190 to 220 GPa. SEM images revealed crack-free fiber surfaces and compact microstructures independent of the amount of ZrO₂.     

Investigation of cure kinetics in epoxy/multiwalled carbon nanotube nanocomposites

With the increased interest in thermoset resin nanocomposites, it is important to understand the effects of the material on nanoscale characteristics. In this study, a curing reaction of an epoxy resin, which contained 0.25, 0.50, or 1.00 wt % of multiwalled carbon nanotubes (MWCNTs), at different heating rates was monitored by differential scanning calorimetry; cure kinetics were also evaluated to establish a relationship between crosslinking (network formation) and mechanical properties. MWCNT concentrations above 0.25 wt % favored crosslinking formation and decreased the activation energy (E_a) in the curing reaction. Examination of the kinetic mechanism suggests that the MWCNT locally restricted the spatial volume and favored the formation of nodular morphology in the resin, especially for high MWCNT concentrations. The MWCNT exhibited some entanglement in the matrix, which hindered a more pronounced effect on the mechanical properties. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39857.     

Hydromorphological,hydraulic and ecological effects of restored wood: findings and reflections from an academic partnership approach

Large wood (re)introduction can deliver multiple benefits in river restoration, but there is a dearth of the detailed and longer‐term post‐project monitoring and evaluation required for improving best practice. We present findings from an academic partnership approach to post‐project evaluation, based on successive MSc research projects on restored large wood in the Loddon catchment, UK. Field and modelling data reveal: (i) key differences in large wood features between restored and natural reaches; (ii) increased hydraulic retention and changes to mesohabitats associated with large wood; (iii) differences in macroinvertebrate community composition around large wood but a lack of site‐level effects; (iv) interactions between macrophytes and large wood that may be specific to restored reaches; (v) a need for further field and modelling studies to inform the accurate representation of large wood in hydraulic models. Some key challenges in partnership working are identified to aid planning and effectiveness of future collaborations.