Precisely Controlled Microsphere Design via Visible‐Light Cross‐Linking of Functional Prepolymers

A new strategy for particle synthesis is enabled by utilizing modern synthetic, polymer, and photochemical techniques to facilitate the synthesis of highly narrow–disperse multifunctional microspheres from visible‐light induced crosslinking of prepolymers in both a single and dual polymer system. The approach requires no stabilizers, bases, or initiators, and proceeds at ambient temperature to yield microspheres with a tunable size range (0.25–5 µm) in less than 4 h, depending largely on solvent composition, but also polymer concentration (2–10 mg mL^?1), ratio, and irradiation intensity (3–20 W). Critically, the visible‐light induced dimerization reaction exploited herein enables simple functional particle syntheses via a single polymer system. Underpinned by an in‐depth kinetic analysis of the particle formation as well as a detailed small molecule study, the mechanism for particle formation is also elucidated. Importantly, inherent advantages of the system are exploited for surface functionalization of residual acrylate and hydroxyl groups (generating inherently fluorescent particles).     

Polymer on Top: Current Limits and Future Perspectives of Quantitatively Evaluating Surface Grafting

Well‐defined polymer strands covalently tethered onto solid substrates determine the properties of the resulting functional interface. Herein, the current approaches to determine quantitative grafting densities are assessed. Based on a brief introduction into the key theories describing polymer brush regimes, a user's guide is provided to estimating maximum chain coverage and—importantly—examine the most frequently employed approaches for determining grafting densities, i.e., dry thickness measurements, gravimetric assessment, and swelling experiments. An estimation of the reliability of these determination methods is provided via carefully evaluating their assumptions and assessing the stability of the underpinning equations. A practical access guide for comparatively and quantitatively evaluating the reliability of a given approach is thus provided, enabling the field to critically judge experimentally determined grafting densities and to avoid the reporting of grafting densities that fall outside the physically realistic parameter space. The assessment is concluded with a perspective on the development of advanced approaches for determination of grafting density, in particular, on single‐chain methodologies.     

Formulation of a Biodegradable Detergent for Cleaning Oily Residues Generated during Industrial Processes

The use of toxic petroleum-based heavy oils is common in industrial processes. The cleaning of machines, equipment, and other surface covered in these oils is achieved with expensive products that are often also toxic and harmful to both the health of workers and the environment. The present paper proposes the development of a sustainable biodetergent made from plant-based materials. Tests were performed to determine the properties of the biodetergent in terms of its surfactant and emulsifying capacities, stability, toxicity, and the removal of heavy oil from glass plates and metallic surfaces. The formulation was composed of a natural solvent (cottonseed oil), a plant-based surfactant agent (saponin), and two natural stabilizers (carboxymethylcellulose and glycerine). The formulation was stable, nontoxic, and highly efficient, removing 100% of the heavy oil from glass and metallic surfaces. This solution developed in this study could be used in diverse industries with the need to clean machines and parts encrusted with oil and grease as well as the cleaning of floors covered with petroleum-based residues. A preliminary analysis of the economic feasibility of using the detergent was carried out at a Brazilian power plant. Besides the reduction in environmental impact due to the use of a nontoxic, biodegradable product as well as the reduction in health risks to workers associated with toxic cleaning products, this new product can have a considerable impact on the market as an environmentally friendly solution.     

Development of mullite fibers and novel zirconia-toughened mullite fibers for high temperature applications

Polycrystalline mullite fibers and novel zirconia-toughened mullite (ZTM) fibers with average diameters between 9.7 and 10.3 μm containing 3, 7 and 15 wt.-% tetragonal ZrO₂ (ZTM3, ZTM7, ZTM15) in the final ceramic were prepared via dry spinning followed by continuous calcination and sintering in air. A shift in the formation of transient alumina phases and tetragonal ZrO₂ to higher temperatures with increasing amounts of ZrO₂ was observed. Concomitantly, the mullite formation temperature was lowered to 1229 °C for ZTM15 fibers. X-ray diffraction revealed formation of the desired tetragonal crystal structure of ZrO₂ directly from the amorphous precursor. Room temperature Weibull strengths of 1320, 1390 and 1740 MPa and Weibull moduli of 9.5, 7.1 and 9.0 were determined for mullite, ZTM3 and ZTM15 fibers, respectively. Average Young’s moduli ranged from 190 to 220 GPa. SEM images revealed crack-free fiber surfaces and compact microstructures independent of the amount of ZrO₂.     

A framework for governance of public green spaces in cities

Public authorities that seek to transfer the cost of managing green spaces to the private sector face apprehension about the extent of community input in managing of public green spaces in cities. In practice, the governance arrangements for managing public green spaces are neither a purely private or public sector responsibility. They are part of complex and contested governance schemas that involve multiple stakeholder groups with varying interests and responsibilities. This paper proposes a simple framework to support different modes of governance appropriate for the management of public green spaces in cities. The framework classifies stakeholders’ desires for engagement based on ecosystem service characteristics defined on a spectrum of excludability and rivalry. The framework is applied to case studies in Australia and Canada. Finally, we discuss the new insights for governance arrangements for public green space management in cities.     

Strategy for a Scale‐up Correlation in a Dissolved Air Flotation Chamber

Beginning with a laboratory‐scale physical model, a scale‐up correlation for a pilot unit project was determined based on the analysis of dynamic similarity correlations involving the predominant phenomena of a dissolved air flotation (DAF) chamber. The implantation costs of pilot units require special strategies due to the lack of correlations of this type, as novel flotation methods have been considered strictly from an economic standpoint. With the aid of computational fluid dynamics and videos of microbubble and floc flow, inertia and gravity were identified as the predominant phenomena in a DAF chamber. The strategy described herein is simple and reduces the likelihood of future risks in scale‐up investments.     

How do gait frequency and serum-replacement interval affect polyethylene wear in knee-wear simulator tests?

Polyethylene wear (PE) is known to be a limiting factor in total joint replacements. However, a standardized wear test (e.g. ISO standard) can only replicate the complex in vivo loading condition in a simplified form. In this study, two different parameters were analyzed: (a) Bovine serum, as a substitute for synovial fluid, is typically replaced every 500,000 cycles. However, a continuous regeneration takes place in vivo. How does serum-replacement interval affect the wear rate of total knee replacements? (b) Patients with an artificial joint show reduced gait frequencies compared to standardized testing. What is the influence of a reduced frequency? Three knee wear tests were run: (a) reference test (ISO), (b) testing with a shortened lubricant replacement interval, (c) testing with reduced frequency. The wear behavior was determined based on gravimetric measurements and wear particle analysis. The results showed that the reduced test frequency only had a small effect on wear behavior. Testing with 1 Hz frequency is therefore a valid method for wear testing. However, testing with a shortened replacement interval nearly doubled the wear rate. Wear particle analysis revealed only small differences in wear particle size between the different tests. Wear particles were not linearly released within one replacement interval. The ISO standard should be revised to address the marked effects of lubricant replacement interval on wear rate.     

Out of the Closet: The Importance of Stories and Storytelling in Planning Practice

This article argues that story has a special importance in planning that has neither been fully understood nor sufficiently valued. Planning is performed through story, in a myriad of ways. The aim here is to unpack the many ways we use story: in policy, in process, in pedagogy, in critique, as a foundation, and as a catalyst for change. A better understanding of the work that stories do can make us better planners in at least three ways: by expanding our practical tools, by sharpening our critical judgment and by widening the circle of democratic discourse.