内蒙古莫古吐铁锡矿床地质特征及成因类型

大兴安岭南段成矿带是中国北方重要的锡多金属成矿集中区,区内成矿地质条件优越,找矿潜力巨大。莫古吐铁锡矿床位于该成矿带南段,其产出位置及成矿地质特征与黄岗梁锡铁矿床具有可对比性,矿床的研究将有助于深化区内矽卡岩型矿床成因和成矿模式的认识。本文通过矿床基本地质特征及控矿因素研究,对莫古吐铁锡矿床成因进行初步分析,认为矿区内的地层、构造、岩浆岩等均有利于矽卡岩型矿床的形成,莫古吐岩体的侵位是主导矿床形成的重要因素,NE向构造是主要的容矿、导矿构造。岩体与围岩接触带及附近有利于成矿物质的富集,矽卡岩化作用与矿床形成关系密切,是控制矿体形态、规模及铁锡富集程度的主要因素,可作为本区寻找矽卡岩型矿床的主要标志。综合分析认为,莫古吐矿床属于典型的与酸性岩浆有关的矽卡岩型铁锡矿床。     

Robustness index for adaptive control based on pole-zero placement

A robustness index for adaptive control is proposed. The control algorithm is based on pole-zero placemen!. Parameter estimation via weighted least-squares recursive formulas is presented. By using the index, effects of the modelling error on the performance of the adaptive control system are indicated. If the index is less than one, the system is stable. Proper on-line control is obtained.     

开式机械压力机床身强度有限元计算

针对用于连续模工作的开式可倾机械压力机常出现的滑块倾斜、模具寿命降低等问题,提出床身新的强度有限元计算方法,对现有设备进行了床身强度计算、刚度校核,增加设备的强度和刚性。     

File and workload allocation on a local multi-access computer network: incorporating local processing and communication overhead

The paper presents an analytical model to allocate files and workload simultaneously among heterogeneous servers for a distributed database where the servers are connected by a local multi-access computer network. The allocation problem is presented in the form of a nonlinear integer programming model. The model incorporates both local processing and communication overhead. The problem is proved to be NP-complete and thus a heuristic is developed. To illustrate its suitability, the heuristic is compared with an exhaustive enumeration method for small problems and with a genetic algorithm for large problems. Computational results demonstrate that the proposed model and heuristic provide effective database designs     

Corrosion performance of high pressure die-cast Al-6Si-3Ni and Al-6Si-3Ni-2Cu alloys in aqueous NaCl solution

The corrosion performance of high pressure die-cast Al-6Si-3Ni (SN63) and Al-6Si-3Ni-2Cu (SNC632) alloys in 3.5% (mass fraction) NaCl solution was investigated. X-ray diffraction (XRD) and microstructural studies revealed the presence of single phase Si and binary Al₃Ni/Al₃Ni₂ phases along the grain boundary. Besides, the single Cu phase was also identified at the grain boundaries of the SNC632 alloy. Electrochemical corrosion results revealed that, the SNC632 alloy exhibited nobler shift in corrosion potential (?_corr), lower corrosion current density (J_corr) and higher corrosion resistance compared to the SN63 alloy. Equivalent circuit curve fitting analysis of electrochemical impedance spectroscopy (EIS) results revealed the existence of two interfaces between the electrolyte and substrate. The surface layer and charge transfer resistance (R_ct) of the SNC632 alloy was higher than that of the SN63 alloy. Immersion corrosion test results also confirmed the lower corrosion rate of the SNC632 alloy and substantiated the electrochemical corrosion results. Cu addition improved the corrosion resistance, which was mainly attributed to the absence of secondary Cu containing intermetallic phases in the SNC632 alloy and Cu presented as single phase.     

High-performance and current crowding-free InGaN-GaNbased LEDs integrated by an electrically-reverse-connected Schottky diode and a Mg-delta doped p-GaN

This work demonstrates high-performance and current crowding-free InGaN/GaN light-emitting diodes (LEDs) using an electrically-reverse-connected Schottky diode (SD) and an Mg-delta (δ) doped layer.Poss...