A rapid detection method for the surface defects of mosaic ceramic tiles

Due to its unique artistic value, mosaic ceramics are widely used in construction-related fields. To meet the artist's demand for high-quality mosaic ceramic to create artistic works, it is necessary to meet the needs for efficient screening of mosaic ceramic tiles. Different from the ordinary large-target ceramics, mosaic ceramics exhibit characteristics of small tile sizes, a variety of colors, large demand for quantities, and easy reflection on the surface. Common manual detection methods show problems of low efficiency or accuracy, easy to fatigue, and many others. To solve these problems, this paper proposes a new detection method to identify surface defects of mosaic ceramic tiles and designs a detection system platform to achieve rapid detection. The experiment proves that the detection system has a detection rate of 93.99% for small defects on the surface of mosaic ceramic tiles, and the detection time of a single mosaic ceramic tile is less than 0.06 s. The detection method can quickly and accurately screen out high-quality, defect-free mosaic ceramic tiles, which can effectively improve the quality and artistic value of mosaic ceramic art creation.     

外墙保温系统中粘结材料的检测技术分析

选择了几份典型的外墙外保温系统标准,通过对这几份标准中胶粘剂和抹面胶浆的成型和检测方法的比较,分析了现有检测技术的优劣,并结合工作实践提出了建议。     

基于DSP的智能电源控制单元设计与实现

本文利用TI公司TMS320F28335芯片高效的浮点运算能力,结合片上丰富的外设,设计并实现了一种具有高可靠性的智能电源控制单元。该控制单元周期性地对各片上外设进行自检维护,完成多路负载通道控制、电压、电流的实时监控,并对故障进行指示、处理和上报,同时提供人机交互界面更新状态信息。经过验证,该控制单元工作稳定,具备良好的工程应用价值。     

Motion Perception Using Analog VLSI

Motion perception is arguably a fundamental mechanism used by natural species to accomplish a number of tasks, such as navigating freely in an unknown environment. Traditional motion perception methods tend to be computationally intensive, requiring powerful computers and large memories. However, by copying biological mechanisms, such as elementary motion discrimination at the early stages of the visual processing paths, it should be possible to build small and efficient motion perception systems. This paper describes the manner in which a simple motion perception model based on the insect visual system has been implemented using mixed analog/digital VLSI. The device has been fabricated in a 2 micron double metal, double polysilicon process, and comprises 61 photo-detectors, and associated analog and digital circuitry. While not entirely successful in that component mismatches hamper the detection of dark-to-bright changes in contrast, the results clearly show the feasibility of using such a device in autonomous control systems.     

几种新型的光电器件

描述用ＳＯＩ技术制造的光耦合ＭＯＳ继电器和多量子阱长波和红外探测器，以及集成异质结晶体管和激光二管于一体的高增益，高灵敏的光电子开关器件，文中着重介绍这些器件的结构，制造工和器件特性，并对其进行了讨论。     

A Low-Complexity Multiuser Detector for Asynchronous CDMA QPSK Adaptive Antenna Array Systems

This paper proposes a low complexity joint space-time multiuser detection algorithm for asynchronous DS/CDMA antenna array systems. The proposed multiuser detector is composed of an adaptive antenna array, used as a linear beamformer, and a sliding window decorrelator. A QPSK modulation scheme is used in order to increase bandwidth efficiency. Numerical results are given in terms of Bit Error Rate (BER) under the assumption of a frequency-selective Rayleigh slow fading channel. In particular, the proposed receiver is shown to be near-far resistant, even in worst fading cases, and to exploit completely array introduction while maintaining acceptable computational complexity. The proposed architecture avoids linear filter realization of the decorrelator, which is impractical in the case of a large number of users, and operates with relatively short data frames instead of the complete information sequence. Finally, this receiver is very flexible to changes in timing configuration.     

强度型光纤传感器的信号检测系统

本文阐述了一种可提高强度型光纤传感器测量精度的检测系统。该系统利用同一检测电路交替检测信号、参考通道的输出信号，并将信号、参考两通道的检测结果相除，从而消除了因发光二极管光源波动及检测电路系统不稳定所带来的误差。采用同步相关技术抑制了噪声，提高了输出信噪比。实验证明，当时间常数ＲＣ为０．０５Ｓ时，采用该检测系统可获得优于千分之一的零点稳定性和优于２×１０３的输出信噪比。     

GaAs器件工艺中等离子刻蚀及计算机辅助监控技术研究

用Ｎ２气和ＮＦ３反应气体，在较低的刻蚀功率下实现了用薄正性光刻胶ＡＺ１５１８作掩模，均匀、快速刻蚀ＳｉＯ２，ＳｉＯＮ，Ｓｉ３Ｎ４，ＷＮ，Ｗ等材料的等离子刻蚀技术。利用到蚀过程中射频参数的变化和计算机技术，将射频参数的变化在计算机屏幕上实时显示，实现了计算机辅助监控和终点检测技术。