Altered age-hardening behavior in the ultrafine-grained surface layer of Mg-Zn-Y-Ce-Zr alloy processed by sliding friction treatment

To gain insight into the ageing behavior of ultrafine grain(UFG)structure,the precipitation phenom-ena and microstructural evolutions of Mg-6Zn-1Y-0.4Ce-0.5 Zr(wt.％)alloy processed by sliding friction treatment(SFT)were systematically studied using hardness texting,transmission electron microscopy(TEM)equipped with high-angle annular dark-field scanning(HADDF-STEM),X-ray diffraction(XRD)and XRD line broadening analysis.The microhardness of the SFT-processed(SFTed)sample initially decreases from 109.6 HV to 104.8 HV at ageing for 8 h,and then increases to the peak-ageing point of 115.4 HV at 16 h.Subsequently,it enters the over-aged period.The un-SFTed sample,as the counterpart,follows a regular ageing behavior that increases from 89.9 HV to 99.6 HV when ageing for 12 h,and then drops.A multi-mechanistic model is established to describe the strengthening due to grain refinement,disloca-tion accumulation,precipitation etc.The analysis reveals that the temperature sensitive UFG structure has an obvious grain coarsening effect,which arouses the soft phenomenon in the early ageing stage.But precipitation hardening provides an excellent hardness enhancement for overcoming the negative influ-ence and helping to reach the peak-aged point.In our microstructural observations,a lot of equilibrium ultrafine MgZn2 precipitates precipitate along dislocations because defects can provide the favorable conditions for the migration and segregation of solute atoms.     

Microstructure and mechanical properties of 3D-printed nano-silica reinforced alumina cores

Ceramic cores are an important component in the preparation of hollow turbine blades for aero-engines. Compared with traditional hot injection technology, 3D printing technology overcomes the disadvantages of a long production cycle and the difficulty in producing highly complex ceramic cores. The ceramic cores of hollow turbine blades require a high bending strength at high temperatures, and nano-mineralizers greatly improve their strength. In this study, nano-silica-reinforced alumina-based ceramic cores were prepared, and the effects of nanopowder content on the microstructure and properties of the ceramic cores were investigated. Alumina-based ceramic cores contained with nano-silica were prepared using the vat photopolymerization 3D printing technique and sintered at 1500 °C. The results showed that the linear shrinkage of ceramic cores first increased and then decreased as the nano-silica powder content increased, and the bending strength showed the same trend. The fracture mode changed from intergranular to transgranular. The open porosity and bulk density fluctuated slightly. The weight loss rate was approximately 20%. When the nano-silica content was 3%, the bending strength reached a maximum of 46.2 MPa and 26.1 MPa at 25 °C and 1500 °C, respectively. The precipitation of the glass phase, change in the fracture mode of the material, pinning crack of nanoparticles, and reduction of fracture energy due to the interlocking of cracks, were the main reasons for material strengthening. The successful preparation of 3D printed nano-silica reinforced alumina-based ceramic cores is expected to promote the preparation of high-performance ceramic cores with complex structures of hollow turbine blades.     

Effects on the crystallite growth behavior of LaPO4 nanopowders and its mechanical properties

The effects of pH of the reaction solution and the concentration of phosphoric acid on the crystal growth behavior of LaPO₄ crystallites were investigated and the mechanical properties of rare-earth phosphates were compared. As a result, the concentration of phosphoric acid of 10% was beneficial to the crystal growth of LaPO₄ nanocrystalline. When the pH value of the reaction solution was 2, the size of LaPO₄ crystallites increased gradually with the increasing reaction temperature, and the smallest crystallite size of 43.27 nm was obtained after heat-treatment at 1000 °C. Simultaneously, the activation energy for crystal growth of LaPO₄ nanocrystalline was relatively lower (26.82 kJ mol⁻¹). With the decreasing radii of rare-earth ions, the hardness, Young's modulus and fracture toughness of the bulk rare-earth phosphates exhibited a reduced tendency, resulted from the increase of porosity under the same preparation process.     

Influence of SiC dispersion and Ba(Sr) substitution on the thermoelectric properties of Ca3Co4O9+δ

Ca₃Co₄O_9+δ is a typical p-type thermoelectric oxide material with a low thermal conductivity. In this study, double-layered oxide samples Ca(Ba,Sr)₃Co₄O_9+δ dispersed with different SiC contents were obtained via the traditional solid phase reaction method. The effects of different elemental substitutions and SiC dispersion contents on the microstructure and thermoelectric properties of the samples were studied. The double optimisation of partial substitution of Ca-site atoms and SiC dispersion considerably improved the thermoelectric properties of Ca₃Co₄O_9+δ. Through the elemental substitution, the resistivity of the Ca₃Co₄O_9+δ material was reduced. Conversely, introducing an appropriate amount of SiC nanoparticles enhanced phonon scattering and was crucial in reducing its thermal conductivity. After double optimisations, the dimensionless thermoelectric figure of merit (ZT) values of both Ca_2.93Sr_0.07Co₄O_9+δ + 0.1 wt% SiC and Ca_2.9Ba_0.1Co₄O_9+δ + 0.1 wt% SiC achieved an optimum value of 0.25 at 923 K.     

Investigation of synergistic effect of nano sized Ag/TiO2 particles on antibacterial,physical and mechanical properties of UV-curable clear coatings by experimental design

The synergistic effect of nano titanium dioxide (10 and 30 nm) and nano silver (10 nm) as antibacterial agents were investigated on UV curable clear coating. Antibacterial and physical–mechanical properties of coating were optimized using experimental design in response surface method. Twenty different samples of nano Ag and nano TiO₂ were prepared in this method. Antibacterial properties on Gram-negative bacteria (Escherichia coli) were investigated. The results revealed that using equal amounts of two sizes of nano TiO₂ promote the antibacterial activity of nano Ag. So, the coating shows strong activity against E. coli. Physical–mechanical properties such as surface hardness, abrasion resistance, scratch resistance and gloss of the coating were evaluated. The results depicted appropriate physical–mechanical properties. Also, scanning electron microscope (SEM), atomic force microscope (AFM) and Fourier transform infrared (FT-IR) spectroscopy were used to study the effect of nano particles on coating properties.     

纳米复合涂料的发展现状及未来发展趋势

综述了国内外纳米复合涂料在各方面的应用和发展现状,指出了其发展中需要解决的问题和发展趋势。     

Nano zero valent iron/modified semicoke composites for the removal of coal tar wastewater

ABSTRACT

The coal tar wastewater was treated by self-synthesized nano zero valent iron (NZVI)/modified semicoke composites. Phenol was employed as simulated sample due to high content of phenol in coal tar wastewater. The results show that the phenol removal rate started to rise with the increase of modified semicoke amount and aging time, reached maximum at certain value, and then began to decrease. With the reaction time extending, phenol removal rate increased gradually, while phenol removal rate came down gradually as the initial phenol concentration rise. The XPS, XRD, and SEM results indicate that NZVI with uniform size was well-distributed on the surface of modified semicoke.     

Experimental Investigation of the A-TIG Welding Process of Incoloy 800H

This work attempts to investigate the influence of different flux powders in the activated-TIG welding process of the Incoloy 800H super alloy. Three different fluxes (SiO₂, ZnO, and 50% ZnO +50% SiO₂) were used and welded under the same conditions and process parameters. The oxide fluxes used were in the form of nanoparticle powders. The metallurgical characteristics and mechanical properties were analyzed, and it was found that the SiO₂ flux could increase the depth of penetration whereas a ZnO flux was detrimental to this effect. Although a SiO₂ flux increased the depth of penetration, it led to a sensitization issue in the grain boundary. The combination of the fluxes 50% ZnO +50% SiO₂ produced a moderate increase in the depth of penetration compared to ZnO flux-coated weldments, but revealed a dendritic structure in the weld region.     

刀具磨损对单晶铝纳米切削过程的影响

基于分子动力学的理论建立了单晶铝的纳米切削仿真模型,比较研究了在刀具未磨损和刀具磨损条件下对切削过程的影响。研究表明：相比于刀具未磨损,在刀具磨损的情况下,已加工表面质量有所下降,基体上出现了大量的位错等缺陷;切削力也全部有所升高,其中刃口半径磨损对切削力影响最为显著,在相同的切削条件,相比于刀具未磨损升高约为17.78%,后刀面磨损和前刀面磨损对切削力的影响基本相同,提高了约7.98%;刀具温度和工件的温度也都有不同程度的升高,其中,工件的温升更高。刀具刃口半径磨损对温升影响最大,达到稳定切削时,刀具的平均温度相比于刀具未磨损升高约为7.2%。     

Platinum Nanoparticles Anchored on TiO2/C Nanowires as a High Performance Catalyst for Hydrogen Peroxide Eletroreduction

In this paper, we employed the as‐prepared TiO₂/C core/shell nanoarrays (TiO₂/C) obtained by a facile thermal evaporation method as a three‐dimensional (3D) architecture to support Pt nanoparticles through an optimized electrodeposition process. The morphology and structure of the as‐prepared electrode are characterized by X‐ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Its catalytic performance towards H₂O₂ electroreduction in basic medium is evaluated by linear sweep voltammetry (LSV) and chronoamperometry (CV). Results revealed that the electrode exhibits significantly high catalytic activity. The current density reached –0.172 A cm⁻² in 1 mol dm⁻³ NaOH and 0.5 mol dm⁻³ H₂O₂ at –1.1 V (vs. Ag/AgCl). This high performance might be due to the 3D electrode architecture inheriting the high electronic conductivity from carbon shell and providing a short pathway for the ion diffusion, and the using of Pt owning an excellent catalytic activity.