Estimation of gradient size of interfacial strain and its optimization for effective magnetoelectric coupling in (CoFe2O4) – (0.93Na0.5Bi0.5TiO3 – 0.07BaTiO3), 2-2 nano-composites

Strain-mediated coupling between the magnetic and electrically ordered phases plays a significant role in magnetoelectric (ME) nano-composites. This study explores a method to analyse and quantify interfacial strain using a grazing angle scan (α) in a ME composite optimised for a specific microstructure. The details of strain around the interface CoFe₂O₄ (CFO) – 0.93Na_0.5Bi_0.5TiO₃ – 0.07BaTiO₃ (NBT-BT) was determined by performing ‘α’ scan, in order to gather information at various depths of the NBT-BT layer around maximum intensity (110) reflection. The strain around the interface was observed to dominate over a spatial region of ～20–30 nm away from the interface. The Piezoresponse force microscopy (PFM) studies performed near the interface reveal that the strain constrain experienced by the ferroelectric layer operates such that polarisation rotation and domain wall motion are constrained compared to the strain relaxed region of the film. For effective strain transfer, heterostructures grown with optimised thicknesses (～20–30 nm) exhibited a superior inverse piezomagnetic effect.     

黔北桑木场背斜铅锌矿深部找矿实例分析*#br#

黔北桑木场背斜位于上扬子地块黔北隆起区毕节弧形褶皱带与赤水克拉通盆地的交汇部位，属于有利的铅锌成矿区带。区内铅锌矿的赋矿层位主要有震旦系灯影组、寒武系清虚洞组、高台组及石冷水组，矿体多产于背斜核部并受断层或裂隙控制。通过对地层岩性特征、地表矿化特征、控容矿构造特征、化探异常特征、物探异常特征等进行综合研究，选择在成矿有利地段进行了工程验证，为进一步开展桑木场背斜铅锌矿深部找矿工作提供了思路。     

Strain properties of (1-x)Bi0.5Na0.4K0.1TiO3-xBi(Mg2/3Ta1/3)O3 electroceramics

A ternary solid solution of Bi_0.5Na_0.5TiO₃–Bi_0.5K_0.5TiO₃–Bi(Mg_2/3Ta_1/3)O₃ (BNKT-xBMT) lead-free electroceramics was synthesized by a solid-state reactive sintering technique. The electrostrain, dielectric, and ferroelectric properties as well as the impedance characteristics and the microstructure were systematically assessed. With the increase of BMT, the BNKT-xBMT ceramics gradually transformed from non-ergodic relaxor phase to ergodic relaxor phase, manifested as the ferroelectric-to-relaxor temperature (T_F-R) shifts towards below room temperature. Additionally, the ferroelectric hysteresis curves became pinched, and the strain curve changed from butterfly-shaped into sprout-shaped. At the ergodic relaxor composition of x = 0.04, a large electrostrain value (S = 0.4%; under an electric field of 60 kV/cm, d₃₃* = 632 pm/V) was achieved, which is mainly attributed to the electric-field-induced transition from the ergodic relaxor phase to the ferroelectric phase.     

荷花山铅锌矿与铜陵地区其它矿床成矿控制因素的对比研究

为了探讨荷花山铅锌矿控矿因素上与铜陵地区其它矿床异同，运用宏、微观相结合，地质观察研究同位素地球化学以及流体包裹体分析相结合的方法，通过地层岩性、地质构造、特定地质体及成矿流体的来源和性质等几个方面与成矿关系的比较，揭示了这种新类型矿床的控矿因素的特点是与岩浆关系不密切的低温热液、角砾岩控矿。得出了这种新类型矿床既具有铜陵地区其它矿床的控矿因素，同时也具有自己独特的控矿因素的结论。     

Cyanidation of Gold Associated with Silver Minerals in Sulfide Mineral Matrices

Lead salt stimulated the dissolution of gold when gold associated with silver minerals was interspersed in the silica or in the pyrite‐silica layer. Gold dissolution was likewise promoted through lead addition for chalcopyrite‐silica and the sphalerite‐silica systems. Lead addition did not boost gold dissolution and a recovery of 6.9 % was achieved for gold and silver minerals dispersed in stibnite. Lead pretreatment also enhanced gold recovery except for the stibnite‐silica system. Gold surface‐passivating films were observed for gold associated with silver minerals and stibnite.     

Effects of anion and cation doping on the thermoelectric properties of n-type PbS

The PbCl_xS_1-x and Pb_1-xBi_xS (x? =?0–0.05) bulks were fabricated with a facile method of hydrothermal synthesis and microwave sintering, and the effect of anionic and cationic donors on the thermoelectric performance of PbS was investigated. Although Cl^? and Bi³⁺ both effectively improved the thermoelectric properties of n-type PbS, more excellent thermoelectric performance was obtained from Cl^? doped samples because of higher electrical property and lower thermal conductivity at higher temperature (T? >?600?K). The thermoelectric figure of merit (ZT) reaches 1.04 for PbCl_0.015S_0.985 at 800?K and increases with temperature increasing without sign of saturation, which is probably the highest value ever reported for single-phase polycrystalline n-type PbS. The results also indicate that the hydrothermal synthesis and microwave sintering can realize anion doping as well as cation doping for n-type PbS at low cost, and PbS should be a robust alternative for PbTe thermoelectric materials.     

Influence of domain switching process on the electrical fatigue behavior of ferroelectrics

We report an experimental approach, designed based on the recent findings that domain switching in ferroelectric ceramics can be separated into three regimes during antiparallel electric field loading, to investigate the influence of domain switching process on the electrical fatigue behavior of ferroelectrics. Uniaxial compressive stress (−2 MPã -100 MPa) and thermal loading (20 °C–150 °C) were used to tune the domain switching process. Under the same loading condition, the bipolar electrical fatigue behavior of soft lead zirconate titanate ceramics was systematically characterized. The amplitude and frequency of the applied electric field are 2 kV/mm and 10 Hz, respectively. By analyzing the evolution of the domain switching process, combined with the measured polarization and strain response, as well as the cracks observed on the surface of the specimen, it is found that the fatigue of ferroelectric ceramics was mainly related to the domain switching process near the coercive electric field: the regime 2 defined in this paper. The underlying mechanism was further discussed by considering the interplay between the domain switching process with the main factors affecting the electrical fatigue of ferroelectrics, namely defect redistribution, charge carrier injection, and crack initiation.     

Resistance reduction effect of potassium bismuth titanate doping in yttrium–manganese co-doped medium Curie temperature barium titanate lead free ceramics through improved synthesis process

Through improved synthesis process, resistance reduction effect of (K_0.5Bi_0.5)TiO₃ (KBT) doping in Y–Mn co-doped BaTiO₃ (BT) lead free ceramics was investigated. By different doping methods (doping K₂O, Bi₂O₃ and TiO₂ or synthesized KBT), medium Curie temperature (around 130 °C) lead free BT ceramics were obtained with ultra-low resistivity (13.84 Ωcm) with a temperature maintaining process at 700 °C. In this contribution, effect of sintering process and doping methods is discussed in detail.     

Gadolinia-modified ceria photocatalyst for removal of lead (II) ions from aqueous solutions

Gd₂O₃-modified CeO₂ particles are prepared by a solid-state reaction method, and are used to remove Pb(II) ions from aqueous solutions by a photoelectrodeposition. The UV–photocatalytic activity for Pb(II) ion removal of the Gd₂O₃-modified CeO₂ is significantly higher than that of pure CeO₂. A solid solution Gd_0.1Ce_0.9O_1.95 phase coexisting with the CeO₂ matrix phase shows a high ability of photoelectrodeposition for the Pb(II) ions removal, compared to the two-phases mixture of Gd₂O₃–CeO₂. The high photocatalytic activity is also supported by a strong photoluminescence (PL) signal from the Gd_0.1Ce_0.9O_1.95–CeO₂. The high activity can be due to a formation of heterojunctions between p-type Gd_0.1Ce_0.9O_1.95 and n-type CeO₂, promoting transfer of photogenerated electron–hole pairs and efficiency restraining recombination of the charges.