数字签名技术在医院电子病历中的设计与应用

为推进病历数字化发展,并确保其信息的安全性,将以HIS电子病历系统为基础,采用安信数字签名技术和PKI或PMI系统搭建相信并加以任用的授权服务,经过针对实际的PKC和CA的确认、委托与管控构建整体的数字签名平台,完成电子病历数字签名功能设计,以加强电子文件的完整性、真实性和不可抵赖性。最后以某医院的XML结构化的电子病历系统为基础进行项目实施,完成了医护人员通过HIS的快速身份认证,和准确地数字签名。     

海藻酸钙固定化零价铁抗团聚及堵塞的作用机制

以海藻酸钠（SA）、氯化钙、微米零价铁（MZVI）为原料，制备了海藻酸钙（CA）固定化MZVI填料（CAZ），通过静态烧杯实验和动态PRB模型实验，探讨了CA运用对Cr(Ⅵ)的去除性能的影响，并通过电镜扫描分析了CA避免团聚、堵塞机制。实验结果表明，CA凝胶颗粒的运用能显著提升MZVI的除Cr(Ⅵ)性能，CAZ相比MZVI对Cr(Ⅵ)的去除率和反应速率分别提升7.1倍、23.0倍；MZVI利用率的提高是CAZ反应器处理Cr(Ⅵ)水量显著大于MZVI反应器的主要原因，MZVI反应速率的提高是CAZ反应器出水Cr(Ⅵ)浓度显著低于MZVI反应器的主要原因。电镜扫描结果表明，SA与氯化钙交联形成的CA具有丰富的骨架孔道结构，具有骨架支撑作用，能有效克服MZVI颗粒因重力作用导致团聚、降低比表面积的缺陷。CA表层固定的MZVI颗粒与Cr(Ⅵ)反应生成的(Fe_xCr_1-x)(OH)₃ 络合沉淀会冲破CA表层外壳，释放到零价铁-渗透反应墙（Fe⁰-PRB）系统中，导致PRB反应初期出现堵塞现象；大部分MZVI颗粒被固定在CA内部，CA内部有较多孔隙结构，这些孔隙结构会控制(Fe_xCr_1-x)(OH)₃ 络合沉淀释放，从而缓解了Fe⁰-PRB后期长期运行持续堵塞的问题。     

Real-time administration of tool sharing and best matching to enhance assembly lines balanceability and flexibility

Collaboration has been found in previous studies on the design of assembly lines to be a useful mechanism. In this study, the focus is on a collaborative assembly (CA) framework, inspired by the design principles of CCT, the Collaborative Control Theory, to improve balanceability and flexibility of assembly lines through tool sharing (TS) among idle and bottleneck workstations. TS is widely practiced in advanced assembly facilities to reduce cost and improve consistency and standardization in assembly and in assembly-and-test utilities, relying often on real time control. The framework developed here addresses the systems design aspect of Mechatronics, covering the planning, execution, and control mechanisms. Planning includes assembly line balancing (ALB) and initial TS decisions, made continually by solving a bi-objective mixed-integer program (BOMIP). A collaborative multi-agent system (CMAS) enhanced with a TS-best matching (BM) protocol is developed to execute the plan, control the process, and modify the TS decisions, considering dynamic changes in the system’s operations. Experiments show that the new CA framework significantly outperforms classic approaches (i.e., ALB without TS-BM) in terms of cycle time, utilization of tools, and balanceability. In addition, the control mechanism is proven to augment the line’s flexibility against the inherent uncertainties of assembly processes, compared to the previously developed static CA frameworks.     

Role of activated carbon on micropollutans degradation by ionizing radiation

The objective of this study was to analyze the influence of the presence of activated carbon on the degradation of the triiodinated contrast medium diatrizoate (DTZ) by the simultaneous use of gamma radiation and activated carbon. Four commercial activated carbons (Ceca, Witco, Sorbo, and Merck) with different textural and chemical characteristics were used for this purpose. The percentage DTZ removal obtained was considerably higher with the gamma radiation/activated carbon (GM/AC) system than with radiolysis in the absence of activated carbon, and it depended on the specific activated carbon employed. First, we optimized the amount of activated carbon required to maximize the amount of DTZ removed by the GM/AC system (0.06 g). The degradation constants were higher with the GM/AC system than with radiolysis alone, evidencing a synergic effect that favors pollutant removal. This synergic effect is independent of the textural but not the chemical characteristics of the activated carbon, observing a higher synergic activity for carbons with a higher surface content of oxygen, specifically quinone groups. We also highlight that the synergic effect of the activated carbon requires adsorbent–adsorbate electrostatic interaction and is absent when this interaction is hindered.     

中海油轻脱沥青油生产环保橡胶油研究

文章介绍了以中海油某轻脱沥青油为原料,通过糠醛精制工艺生产环保橡胶油及高芳烃环保橡胶油的研究,文中探讨了工艺条件对产品性质的影响。结果表明,通过糠醛一次抽提工艺可得到CA值12.0%左右的环保橡胶油,通过糠醛两次抽提工艺可以得到CA值18.0%以上的高芳烃环保橡胶油,且CA值最高可达25.7%,达到国内外先进水平。     

Selective Laser Melting process optimization of Ti–Mo–TiC metal matrix composites

Selective Laser Melting (SLM) was used to process a powder mixture of CP Ti, 6.5 wt% Mo and 3.5 wt% Mo₂C. The process parameters were optimized to obtain full-density, crack free parts. After the in situ decomposition of Mo₂C in favor of the formation of TiC, the material consisted of a homogeneous dispersion of submicrometer sized TiC platelets in a β-(Ti,Mo) matrix exhibiting a high hardness up to 550 HV and compressive yield stress of 1164 ± 37 MPa. The microstructure and mechanical properties could be tailored by variation of the process parameters within the high-density processing window, as well as through post-process heat treatments.     

贝雷法三参数级配控制的探讨

介绍了贝雷法级配设计的一些基本概念，评述了贝雷法在Superpave混合料设计中的应用，着重介绍了三参数级配控制法，结果表明经贝雷法设计的Superpave混合料既能抗车辙又能防渗水，是一种较好的级配设计方法。     

基于动态频谱接入的载波聚合技术研究与实现

以LTE-Advanced系统为研究背景,提出了一种基于动态频谱接入技术的载波聚合方案(DSA-CA)。该方案的主要思想是使支持载波聚合技术的eNB根据小区的平均负载自适应地调节聚合的载波数量,从而达到合理利用频谱的目的。通过对基于动态频谱接入技术的载波聚合方案在LTE-Advanced 系统中的性能进行仿真研究,结果表明:DSA-CA方案与传统载波聚合方案(CA)相比,可使系统性能在一定程度上得到提高,尤其当一个小区处于高负载、另一个小区处于低负载时,DSA-CA方案的优势更加明显,此时高负载小区系统吞吐量得到明显提高,低负载小区的频谱效率也显著上升。     

卷取温度对超低碳T-3CA第二相析出的影响

 为研究卷取温度对超低碳T-3 CA中第二相粒子析出行为的影响，采用金相、TEM等检测手段，分析了580、630、680 ℃ 3个典型卷取温度下超低碳T 3 CA中第二相粒子的析出特性，结果发现卷取温度越高，热轧形成的TiC粒子尺寸越粗大，分布越稀疏。结合相关动力学计算分析了卷取温度对TiC粒子沉淀析出时临界晶核尺寸、相对形核率、相对沉淀析出时间的影响。结果表明，随着卷取温度由580提高到680 ℃，TiC粒子沉淀析出时临界晶核尺寸增大约1.0 nm，相对形核率降低约1.0个数量级，相对沉淀析出孕育时间增大约0.8个数量级。     

聚乙烯装置催化剂溶液中钛、钒含量测定方法的改进

移取2~3 m L(约1.76~2.64 g)CAB或CAB-2催化剂溶液,在硫酸溶液中以3%过氧化氢为显色剂,分别于410 nm和460 nm处测定混合物吸光度,通过解联立二元方程式求出催化剂溶液中钛、钒含量。