EFFECT OF IMPURITY Zr ON PHYSICAL PROPERTIES OF AMORPHOUS FeZrSiB ALLOYS

本文研究了掺少量Zr对非晶态Fe_(82-x)Zr_xSi_5B_(13)(x=0.02,0.16,0.87)合金的磁性、电性和热稳定性的影响。实验结果表明,当Zr含量从x=0.02增加到0.87时,晶化温度T_(cr)从755K增加到782K(升温速率10K/min),室温下的饱和磁化强度σ(R. T. )和居里温度T_C分别下降了3％和4.5％。Zr的加入也使得交换积分的涨落增大。在x=0.87的样品中,温度T=15K时出现了电阻率的极小值,可以认为是类Kondo效应的贡献。     

A DYNAMIC OBSERVATION OF MICROSCOPIC DEFORMATION BEHAVIOR IN DUAL-PHASE STEELS

<正> 在备有拉伸台的S-550扫描电镜下直接观察了铁素体加马氏体双相钢拉伸变形的全过程,分析了马氏体含量,马氏体含碳量,铁素体性能等因素对两相变形特别是屈服行为的影响。材料及试验方法 试验用料为国产10号(C     

Study On the Tribological Behavior of the Arc-added Glow Discharge Plasma Non-hydrogen Carburization On Titanium Alloy Surfaces

This paper introduces a new titanium alloys surface strengthening treatment by using the arc-added glow discharge plasmas non-hydrogen carburization technique. High purity and high strength graphite is selected as cooling cathode arc source for supplying carbon atoms and particle, which migrate to the titanium alloy(Ti6Al4V) surface and form modified layer. Thus, the hydrogen embrittlement is avoided while the tfibological behavior of the titanium alloy surface is improved in the respects of anti-friction and anti-wear ability.The tribological behavior of the modified layer under dry sliding against SAE52100 steel was evaluated on a ball-on-disc test rig. The results showed that the modified layer obtained a thickness of 30μm at 980℃, 30minutes. The microhardness of the Ti6Al4V alloy surface attained 936 HV, which was much larger than that of the Ti6AI4V alloy. The Ti6AI4V alloy was characterized by adhesion wear and scuffing under dry sliding against the steel, while the surface modified layer experienced much abated adhesion wear and scuffing under the same testing condition. This could be attributed to the carbon dement with different modalities exists in the modified layer.The modified layer showed good friction-reducing and fair anti-wear ability in dry sliding against the steel. Using the SEM,XRD and XPS, the phase structure and morphology of the carburization modified layer was analyzed.     

基于信息集成的制造业质量创新研究

文章总结了我国制造业信息化现状，建立了具有质量、成本、时间等3维质量要素框架及基于信息集成的质量创新框架模型；探讨了管理创新的主要内容和技术创新的关键技术；结合案例，分析了质量创新绩效及其评价方法。     

考虑厚度宽容度的曝光曲线在小径管射线检测中的应用

按照JB/T 4730-2005标准[1](以下简称标准),小径管为外径D0≤φ100 mm的管道,为保证特种设备行业的使用安全,需要采用适当的方法对其进行检验.……     

面向网络化定制的产品族复合建模技术

在分析了网络化定制关键技术的基础上，针对性地对信息映射方法和产品族建进行了研究。提出了多层结构信息映射模型，以及综合类元件和参数化特征建模的双层复合产品族模型。结合本方法和以往网络化制造领域中所取得的成果，实现了较完整的基于Web的个性化定制过程。     

1 250 mm五机架六辊冷连轧工艺控制系统核心技术

简要介绍了自主设计制造、具有完全自主知识产权的1 250 mm五机架六辊冷连轧产线工艺及设备特点。重点阐述了冷连轧工艺控制系统的硬件配置、软件架构及核心技术。采用基于简易有限元的轧制力模型及基于成本函数的多目标负荷分配模型，实现了高精度的轧制规程计算。开发了原料板快速启车技术与板形多变量综合最优控制技术，实现了冷轧产品的尺寸精准控制。现场实际应用效果表明，机组稳定运行率达到99.8%以上，不同规格的产品厚度控制精度均达到±0.8%以内，板形控制精度均达到5I以内。     

A hybrid algorithm for predicting chip form/chip breakability in machining

Prediction of chip breakability for a wide range of machining conditions is a difficult task. Currently available predictive machining theories are not suitable for use in the shop floor environment. The methodology presented in this paper provides a new and viable means to predict chip breakability and chip shapes/sizes in machining process planning systems. Due to the extreme difficulty involved in developing a numerical model for predicting chip breakability for a wide range of machining conditions, including work materials, tool geometry, chip-breakers and cutting conditions, this paper presents a hybrid algorithm-based model to characterize various chip shapes and sizes, and to quantify the chip form/chip breakability based on a chip control reference database developed through a set of systematic machining experiments. The chip form and chip breakability could then be predicted with reasonable accuracy for a given set of machining conditions using this new algorithm in conjunction with the chip control reference database.     

水性聚氨酯材料配方设计技巧

介绍了优选法的0.618法和分数法,对其进行改进创新和原理证明,并应用于生产涂料配方设计中。