Concanavalin A immobilized magnetic poly(glycidyl methacrylate) beads for antibody purification

Concanavalin A (Con A) immobilized magnetic poly(glycidyl methacrylate) (mPGMA) beads in monosize and spherical for (1.62 μm in diameter) were used for the purification of human immunoglobulin G (IgG) from human plasma. Con A was immobilized by covalent binding onto the mPGMA beads. The maximum IgG adsorption on the mPGMA-Con A beads was observed at pH 6.0. The nonspecific IgG adsorption onto the plain mPGMA beads was very low (0.22 mg/g). Scatchard analysis of the adsorption isotherm for IgG on mPGMA-Con A beads showed an affinity constant (K_a) of 1.39 × 10⁵ M⁻¹ and a theoretical maximum adsorption capacity of 109.1 mg/g. An apparent IgG adsorption capacity of 66.2 mg/g was observed under the experimental conditions. IgG adsorption capacity from human plasma was observed as 48.0 mg/g. The adsorption of human serum albumin from plasma was 2.0 mg/g. The total protein adsorption was determined to be 50.0 mg/g. IgG molecules could be repeatedly adsorbed and eluted with the mPGMA-Con A beads without noticeable loss in the IgG adsorption capacity. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Functionalized Hybrid Coatings on ABS Surfaces by PLD and Dip Coatings

It is important to give water-repellent and antibacterial properties to the acrylonitrile butadiene styrene (ABS) surfaces of the hearing aids. In this study, the sol–gel Si and sol–gel Ti solutions were prepared from the reactions of silicon ethoxide, titanium butoxide and methacrylic acid. The catalyst and Dynasylan F8815 were added to the sol–gel solutions to give hydrophobic properties onto the ABS surfaces. Additionally, silver nanoparticles were synthesized by nanosecond laser and added to the coating solutions to give extra antibacterial properties. The surfaces of the ABS targets were coated using the sol–gel dip coating and pulsed laser deposition techniques. The coatings with good adhesion between film and substrate and good water-repellent properties were achieved. The average contact angles for the coated ABS surfaces were measured in the range between 120 and 125 degrees. The obtained sol–gel materials and produced thin films onto the ABS surfaces were also analyzed in terms of the antibacterial properties. The highly antibacterial properties were observed in the sol–gel solutions and the thin films.     

Dependency of removal efficiency on electrode arrangements in the treatment of oily wastewaters by electrocoagulation

Turbidity and chemical oxygen demand (COD) removal efficiencies were analyzed depending on electrode layouts by performing electrocoagulation experiments using horizontal and vertical electrochemical cells. Multiple aluminum plate electrodes were placed into different sections of the electrochemical cells. Removal efficiencies at the horizontal electrochemical cell were always higher than the one’s obtained from the vertical electrochemical cell. But the use of vertical electrochemical cell consumed less energy during the electrocoagulation tests. The highest COD removal efficiencies were 97% and 88% in the horizontal and vertical electrochemical cells, respectively. However, the energy consumption for COD removal in the horizontal electrochemical cell was 47% higher than the energy consumed in the vertical electrochemical cell.     

Poly(o-anisidine) on brass: Synthesis and corrosion behavior

The electrochemical synthesis of poly(o-anisidine) (POA) was achieved on brass (CuZn) electrode by applying two scan rates (50 and 20 mVs⁻¹). The synthesized polymer films were strongly adherent and homogeneous in both cases. Their corrosion performance was investigated by AC impedance spectroscopy (EIS) technique, anodic polarization plots and open circuit potential-time curves, in 3.5% NaCl solution. It was clearly seen that poly(o-anisidine) films provided a significant physical protection for longer exposure time. It was shown that polymer film coated at high scan rate (CuZn/POA-H) exhibited better barrier property against the attack of corrosive agents when compared with polymer film obtained at low scan rate (CuZn/POA-L). It was found out that poly(o-anisidine) film synthesized at high scan rate caused a significant increase in corrosion resistance by its catalytic behavior on formation of protective oxide layers on the surface in longer time.     

Laboratory Studies to Determine Suitable Chemicals to Improve Oil Recovery from Garzan Oil Field

Garzan oil field is located at the south east of Turkey. It is a mature oil field and the reservoir is fractured carbonate reservoir. After producing about 1% original oil in place (OOIP) reservoir pressure started to decline. Waterflooding was started in order to support reservoir pressure and also to enhance oil production in 1960. Waterflooding improved the oil recovery but after years of flooding water breakthrough at the production wells was observed. This increased the water/oil ratio at the production wells. In order to enhance oil recovery again different techniques were investigated. Chemical enhanced oil recovery (EOR) methods are gaining attention all over the world for oil recovery. Surfactant injection is an effective way for interfacial tension (IFT) reduction and wettability reversal. In this study, 31 different types of chemicals were studied to specify the effects on oil production. This paper presents solubility of surfactants in brine, IFT and contact angle measurements, imbibition tests, and lastly core flooding experiments. Most of the chemicals were incompatible with Garzan formation water, which has high divalent ion concentration. In this case, the usage of 2-propanol as co-surfactant yielded successful results for stability of the selected chemical solutions. The results of the wettability test indicated that both tested cationic and anionic surfactants altered the wettability of the carbonate rock from oil-wet to intermediate-wet. The maximum oil recovery by imbibition test was reached when core was exposed 1-ethly ionic liquid after imbibition in formation water. Also, after core flooding test, it is concluded that considerable amount of oil can be recovered from Garzan reservoir by waterflooding alone if adverse effects of natural fractures could be eliminated.     

(BaTiO3)1-x + (Co0.5Ni0.5Nb0.06Fe1.94O4)x nanocomposites: Structure,morphology, magnetic and dielectric properties

Two phase-based nanocomposites consisting of dielectric barium titanate (BaTiO₃ or BTO) and magnetic spinel ferrite Co_0.5Ni_0.5Nb_0.06Fe_1.94O₄ (CNNFO) have been synthesized through solid state route. Series of (BaTiO₃)_1-x + (Co_0.5Ni_0.5Nb_0.06Fe_1.94O₄)_x nanocomposites with x content of 0.00, 0.25, 0.50, 0.75, and 1.00 were considered. The structure has been examined via X-rays diffraction (XRD) and indicated the occurrence of both perovskite BTO and spinel CNNFO phases in various nanocomposites. A phase transition from tetragonal BTO structure to cubic structure occurs with inclusion of CNNFO phase. The average crystallites size of BTO phase decreases, whereas that for the CNNFO phase increases with increasing x in various nanocomposites. The morphological observations revealed that the porosity is highly reduced, and the connectivity between grains is enhanced with increasing x content. The optical properties have been investigated by UV−vis diffuse reflectance spectroscopy. The deduced band gap energy (E_g) value is found to reduce with increasing the content of spinel ferrite phase. The magnetic as well as the dielectric properties were also investigated. The analysis showed that CNNFO ferrite phase greatly affects the magnetic properties and dielectric response of BTO material. The obtained findings can be useful to enhance the performances of magneto-dielectric composite-based systems.     

Comparative study on corrosion behaviors of Mg-Al-Zn alloys

A comparative study on corrosion behaviors of various Mg-Al-Zn alloys (AZ21, AZ41, AZ61 and AZ91 series, cast under same cooling conditions and controlled alloying composition) was carried out. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) were used for microstructural examinations. The corrosion behaviors were evaluated by immersion tests and potentiodynamic polarization measurements in 3.5% NaCl solution. The results showed that the influence of Al addition on corrosion resistance was more pronounced up to 4% (i.e. AZ41) above which its influence was at less extent. The deterioration of the corrosion resistance of the alloys, at higher Al contents, was attributed to the amount and morphology of β-Mg₁₇Al₁₂ intermetallics and the interruption of continuity of the oxide film on the surface of the alloys owing to coarsened β intermetallics.     

Decentralized Coordination Control for a Network of Mobile Robotic Sensors

A decentralized control approach is presented for a network of robotic sensors to achieve the global coordination: group aggregation or consensus flocking. Each robotic sensor obeys three local interaction rules: group cohesion, collision avoidance and velocity alignment. Accordingly, the resultant control law for each robotic sensor is composed of three associated control components. The cohesion control component is based on geometry and additionally enables maintaining initial interconnection of network. The alignment control component ensures that all members in an interconnected network eventually reach to a common velocity. The control component for collision avoidance among members, as a passive role, is embedded in cohesion control. Simulation results demonstrate the capability of the proposed control approach in achieving the coordination behaviour with an initially interconnected network. However, we observed that an initially non-interconnected network may also achieve the coordination behaviour depending on the initial distribution and velocities. Initial interconnection of a network is only a sufficient but not essential condition for the network to achieve the coordination behaviour for our control approach.     

Challenges in Developing a Bessel-Beam Based Ultrafast Ablation Probe

Instruments and Experimental Techniques - With its elongated depth of focus, Bessel beams offer rapid and high aspect ratio ablation capability, in contrast to Gaussian beam counterparts. In this...