Effect of laser fluences on the structure of carbon nitride films deposited by direct current plasma assisted pulsed laser ablation

Carbon nitride films were deposited by direct current plasma assisted pulsed laser ablation of a graphite target under a nitrogen atmosphere at room temperature. The surface morphology, composition and bonding structure of the deposited films were characterized by atomic force microscopy (AFM), Fourier transform infrared (FTIR) spectroscopy, Raman, and X-ray photoelectron spectroscopy (XPS). The effect of laser fluences in the range 0.5–3 J/cm² on the surface morphology, composition and bonding structure of the carbon nitride films were systematically studied. As laser fluence is increased, AFM results show a great decrease in the surface roughness of carbon nitride films. FTIR and XPS results indicate an increase in the N/C ratio and the content of N atoms bonded to sp³ C, as well as a decrease in the content of H atoms and the content of N atoms boned to sp² C in the deposited films, and Raman spectra indicate an increase in the content of disordered sp² C atoms and the sp² cluster size. The increase in the film density and the decrease in the particle fraction contribute to the decrease of surface roughness with increasing laser fluence.     

真空压铸的发展

真空系统是压铸过程中排除气体的最有效的方法之一。然而，真空压铸的发展几经起伏，现在则发展到一个新的阶段。从模具中抽出气体是几种抽气方法中较为简便的一种。真空气道的设计与常规气道则有所不同     

The internal nitriding behavior of Co-3Cr,Co-3Al,and Co-3Ti (a/o) over the range of 700–1100°C

Internal nitridation of Co containing 3 a/o of either Cr, Al, or Ti was studied over the range of 700–1100° C in NH₃/H₂ (694 ratio). The kinetics of thickening of the reaction zone followed the parabolic rate law, suggesting that solidstate diffusion was rate controlling. Activation energies obtained were 51.2 Kcal/molfor Co-3Cr, 46.6 Kcal/mol for Co-3Ti, and 27.9 Kcal/mol for Co-3Al. XRD showed only CrN, AlN, and TiN. Deep etching revealed that AlN formed hexagonal plates near the surface when formed at high temperature, the precipitates becoming more massive (blocky morphology) near the reaction front. TiN formed elongated dendritic precipitates, whereas CrN tended to form spheroids. The precipitate size varied with temperature, decreasing with decreasing temperature. In some cases, nitriding formed a case but no visible precipitates even at very high magnifications in the SEM. The solubility of nitrogen in cobalt was determined by long-time equilibration and subsequent chemical analyses. The diffusivity of nitrogen in cobalt was determined from measured permeabilities and the experimentally determined solubilities. Mechanisms are discussed, and the behavior of internal nitridation is compared with internal carburization and oxidation in cobalt alloys.     

Extraction-chromatographic Separation of Microamount Scandium(Ⅲ)with HEH(EHP) Resin and Its Analytical Application

The optimum conditions for the extraction-chromatography by using 2-ethylhexyl-2-ethylhexyl-phosphonate resin to separate scandium(Ⅲ)from large amounts of other metal ions were reported.A me-thod for the separation and determination of microamount of scandium has been developed.This methodgives higher accuracy and reproducibility than solvent extraction with PMBP,especially,for the samplescontaining high content of titanium.Many shortcomings of other methods ever reported can be overcomeby the present method.     

Co-colouration Effects in the Systems of Metal(Ⅱ)-Rare Earth(Ⅲ)-Xanthene Dye and Their Influences on Photometric Determination of Metal Ions

After comparing the influences of each rare earth(Ⅲ),11 species of metal(Ⅱ)and 8 species of acidictriphenylmethane dye on the formation of coloured coordination compound in the system of Metal(Ⅱ)-RE(Ⅲ)-Dye,it was proven that the co-colouration effect can be caused only by the xanthene dyes(XD)con-taining substituting hydroxy.group on the ortho-position of etheric oxygen group.Besides,the radius of met-al(Ⅱ)must not be smaller than a definite limit;otherwise,no co-colouration appears.Furthermore,the acid-ity of medium is another important factor to affect co-colouration,Bromopyrogallol red causesco-colouration of Pb(Ⅱ)-RE(Ⅲ)only,owing to its higher chromophoric acidity;while alizarin violet causesco-colouration of M(Ⅱ)-RE(Ⅲ)(M=Pb,Ca,Sr and Ba),due to its lower chromophoric acidity.The condi-tions causing co-colouration,the regularities of co-colouration and the influences of co-colouration inphotometric determination of metals were discussed.     

球磨改性处理对Ti0．9Zr0．1Mn1．5合金相结构及储氢性能的影响

系统研究了Ti0．9Zr0．1Mn1．5储氢合金经不同时间（t=0min，10min，30min，60min）球磨改性处理后对其相结构及储氢性能的影响。结构分析表明，Ti0．9Zr0．1Mn1．5合金在球磨改性处理前后均由单一的六方结构的C14型Laves相组成；随着球磨时间的延长，合金粉的平均粒度减小，并出现了部分团聚现象。储氢性能测试表明，铸态合金经4次吸放氢循环后活化，室温最大吸氢量和有效放氢量分别为209．3ml／g和157．6ml／g，放氢率为75．3％；随着球磨时间的延长，合金的活化性能得到改善，室温最大吸氢量和有效放氢量均先升后降，且都在球磨30min时达到相应最高值231．4ml／g和203．8ml／g，放氢率达到88．1％。由此可见，适当的球磨改性处理能有效地改善Ti0．9Zr0．1Mn1．5合金的综合储氢性能。     

离心喷射沉积IN718合金及其δ相中典型元素的分布特征

对离心喷射沉积（CSD）IN718合金涡轮盘沿厚度方向Nb元素的含量、热处理制度、凝固态成分偏析区的体积分数、δ及γ相中各元素含量及其分配量进行了研究。结果表明：尽管在CSD成型合金中Nb的偏析比较小，但使用标准热处理制度尚不能使其均匀化：采用1040℃，6h固溶均匀化处理可使Nb的偏析消除，并在该温度下经21h处理可在盘厚截面上获得Nb的均匀分布；将完全均匀化的试样分别经910℃，2h，4h，6h，8h时效，在δ相（γ相）中元素Ni，Nb和Ti的含量及其分配量逐渐增加（减少），与之相对应，元素Cr和Fe的含量及其分配量逐渐减少（增加），采用亚点阵元素浓度测算法，能合理确定时效过程中δ及γ相中各元素的含量及其分配量的变化。     

Conductivity enhancement in transparetn ZnO films via Al-dopping produced by CW-CO2 laser-induced evaporation

Highly conductive transparent aluminium-doped ZnO (ZnO:A1) films were successfully deposited by CW-CO₂ laser-induced evaporation. Optimisation of evaporation parameters was based on laser power, substrate temperature, O₂ partial pressure in the vacuum chamber and amount of Al in the ZnO source pellet. ZnO:A1 films with an electrical resistivity as low as 6.6 × 10⁻²Ω·cm and an optical transmission of 80% at 500nm were obtained at laser power of 15 W, substrate temperature of about 200°C, O₂ partial pressure of 6—7 × 10⁻⁴ Torr and 5wt.% Al. Conductivity of ZnO films can be increased one order via Al-doping in ZnO films. The films obtained by laser-induced evaporation have compared quite favorably with the high quality films obtained by sputtering.     

宝钢粉煤灰处理利用与展望

介绍宝钢粉煤灰处理利用实现排出量与处理量动态平衡的各项有效措施，并提出进一步拓展利用粉煤灰的途径与措施。