分布式PACS通信服务中间层构造方法研究

基于目前分布式PACS中存在的问题,提出一个通信服务中间层的构造方法,分别进行了基于设计模式通信框架的构造、DICOM图像互操作和分布式PACS可复用构件的研究.通信服务中间层的构造不仅提高了分布式PACS在网络异构环境中的可移植性、可扩展性以及相关QoS性能,还满足了PACS今后发展中提出的较高的互连互操作性的要求.     

Preparation and properties of nanosize MnZn ferrite from δ-FeOOH

Ferrous ion was transformed into feroxyhyte (δ-FeOOH) by oxidation. Then, manganese sulfate and zinc sulfate in some ratio were added to the feroxyhyte solution. The co-precipitation was boiling reflux conditions sometime under constant stirring. The nanosize MnZn ferrite powder was formed. The mechanism of preparation of the nanosize MnZn ferrite was discussed, and the formation of feroxyhyte which was playing a key role during the process was mentioned. The properties of powder was tested by means of X-ray diffraction, transmission electron microscopy and vibrating sample magnetometer. The results show that the samples of spherical particles about 20 nm, which have characteristics of ferrimagnetism, has larger saturation magnetization, but the remanent magnetization and coercivity are comparatively smaller. The spinel MnZn ferrite nanosize powder was successfully prepared from δ-FeOOH at low temperature, with low-carbon steel and peroxide as main material.     

Honey bees mating optimization algorithm for process planning problem

Process planning is a very important function in the modern manufacturing system. It impacts the efficiency of the manufacturing system greatly. The process planning problem has been proved to be a NP-hard problem. The traditional algorithms cannot solve this problem very well. Therefore, due to the intractability and importance of process planning problem, it is very necessary to develop efficiency algorithms which can obtain a good process plan with minimal global machining cost in reasonable time. In this paper, a new method based on honey bees mating optimization (HBMO) algorithm is proposed to optimize the process planning problem. With respect to the characteristics of process planning problem, the solution encoding, crossover operator, local search strategies have been developed. To evaluate the performance of the proposed algorithm, three experiments have been carried out, and the comparisons among HBMO and some other existing algorithms are also presented. The results demonstrate that the HBMO algorithm has achieved satisfactory improvement.     

基于个性诊断的路段缺失速度值估计

针对基于GPS的浮动车技术因无法做到对路网的时空间全覆盖导致部分路段实时交通状态缺失问题,提出基于热门路段个性化诊断(personality diagnosis base on popular road,PDPR)模型对各路段上的缺失速度值进行估计。使用K均值算法对所有原始数据作离散化处理,根据数据覆盖率对路段进行分类;以高覆盖率路段的速度数据为辅助,使用个性诊断算法(personality diagnosis,PD)对低覆盖率路段进行缺失速度估计,把估计值映射到连续型空间。实验结果表明,PDPR模型估计误差比PPCA(probabilistic principal component analysis)算法低32.84%,比滑动平均法低5.70%。     

光波导加速度传感器中3dB耦合器设计

光波导加速度传感器是一种实用型加速度传感器,目前广泛应用制备光学加速度计的迈克尔逊、马赫—曾德等干涉仪的核心部件都包含3 dB耦合器。3 dB耦合器的设计对光波导加速度传感器的检测精度尤为重要。介绍了所设计的光波导加速度传感器的工作原理,设计了3 dB耦合器波导的结构和参数,并用光学模拟软件OptiBPM对3 dB耦合器进行模拟。结果表明:所设计的3dB耦合器具有良好性能,符合设计要求。     

基于STM32平台的CAN总线车载式漏电流数字传感器

介绍一种基于STM32平台的CAN总线车载式漏电流数字传感器的设计。在高精度模拟漏电流传感器的基础上,采用CAN总线进行数据通信,在目前高端的、低功耗、小系统设计处理器Cortex—M3(STM32)上经数字化改进而实现。该漏电流数字传感器经实验验证检测准确、响应快速、数据通信安全可靠,是目前一种先进的车载式漏电流数字传感器。实际使用时,由多个漏电流数字传感器与一台计算机互接,构成一个多点的漏电检测网络,最终实现漏电检测的综合处理。     

改进的GrabCut方法在舌诊系统中的应用

数字舌象图片的正确分割是实现计算机中医舌诊自动化系统的重要前提,为了高效而准确地分割出舌象,提出了一种基于四叉树与GrabCut的舌象分割方法.该方法首先利用四叉树分解对采集的舌象初分割,然后用相似区域的颜色均值优化GrabCut算法中高斯混合模型参数,最终完成舌象分割.实验结果表明：该算法使得舌象分割效率大大提高,具有很好的实用性.     

秦安县农村户用改进型沼气池建造的关键技术

近年来,随着我县农村户用沼气建设力度的不断加大,为缓解我县能源资源短缺的现状,通过对农村户用沼气池施工技术及工艺的改进,进行技术集成示范,总结出秦安农村户用改进型沼气池的建造技术,为该地区沼气事业的发展提供科学依据.     

锅炉主燃料跳闸保护的设计与分析

锅炉是火力发电的主要设备之一,锅炉MFT（Main Fuel Trip）是锅炉主要设备发生故障时重要的保护手段,也是电厂热工保护的重要内容”,。结合包铝热电厂330MW亚临界机组锅炉设备的特点及实际调试过程,本文分别从锅炉MFT系统的总体结构、控制软逻辑的设计、后备硬跳闸回路的设计等方面对锅炉MFT系统进行详细的介绍,进一步对其安全性和可靠性进行分析,为同类型的锅炉主燃料跳闸系统提供参考。