Discovery of an Allosteric Ligand Binding Site in SMYD3 Lysine Methyltransferase

SMYD3 is a multifunctional epigenetic enzyme with lysine methyltransferase activity and various interaction partners. It is implicated in the pathophysiology of cancers but with an unclear mechanism. To discover tool compounds for clarifying its biochemistry and potential as a therapeutic target, a set of drug-like compounds was screened in a biosensor-based competition assay. Diperodon was identified as an allosteric ligand; its R and S enantiomers were isolated, and their affinities to SMYD3 were determined (K_D=42 and 84 μM, respectively). Co-crystallization revealed that both enantiomers bind to a previously unidentified allosteric site in the C-terminal protein binding domain, consistent with its weak inhibitory effect. No competition between diperodon and HSP90 (a known SMYD3 interaction partner) was observed although SMYD3–HSP90 binding was confirmed (K_D=13 μM). Diperodon clearly represents a novel starting point for the design of tool compounds interacting with a druggable allosteric site, suitable for the exploration of noncatalytic SMYD3 functions and therapeutics with new mechanisms of action.     

Laboratory Studies to Determine Suitable Chemicals to Improve Oil Recovery from Garzan Oil Field

Garzan oil field is located at the south east of Turkey. It is a mature oil field and the reservoir is fractured carbonate reservoir. After producing about 1% original oil in place (OOIP) reservoir pressure started to decline. Waterflooding was started in order to support reservoir pressure and also to enhance oil production in 1960. Waterflooding improved the oil recovery but after years of flooding water breakthrough at the production wells was observed. This increased the water/oil ratio at the production wells. In order to enhance oil recovery again different techniques were investigated. Chemical enhanced oil recovery (EOR) methods are gaining attention all over the world for oil recovery. Surfactant injection is an effective way for interfacial tension (IFT) reduction and wettability reversal. In this study, 31 different types of chemicals were studied to specify the effects on oil production. This paper presents solubility of surfactants in brine, IFT and contact angle measurements, imbibition tests, and lastly core flooding experiments. Most of the chemicals were incompatible with Garzan formation water, which has high divalent ion concentration. In this case, the usage of 2-propanol as co-surfactant yielded successful results for stability of the selected chemical solutions. The results of the wettability test indicated that both tested cationic and anionic surfactants altered the wettability of the carbonate rock from oil-wet to intermediate-wet. The maximum oil recovery by imbibition test was reached when core was exposed 1-ethly ionic liquid after imbibition in formation water. Also, after core flooding test, it is concluded that considerable amount of oil can be recovered from Garzan reservoir by waterflooding alone if adverse effects of natural fractures could be eliminated.     

Improvements of the structural,thermal, and mechanical properties of structural adhesive with functionalized boron nitride nanoparticles

Investigations on the production and development of nanoparticle-reinforced polymer materials have been attracted attention by researchers. Various nanoparticles have been used to improve the mechanical, chemical, thermal, and physical properties of polymer matrix composites. Boron compounds come to the fore to improve the mechanical and thermal properties of polymers. In this study, mechanical, thermal, and structural properties of structural adhesive have been examined by adding nano hexagonal boron nitride (h-BN) to epoxy matrix at different percentages (0.5, 1, 2, 3, 4, and 5%). For this purpose, nano h-BN particles were functionalized with 3-aminopropyltriethoxysilane (APTES) to disperse the h-BN nanoparticles homogeneously in epoxy matrix and to form a strong bond at the matrix interface. Two-component structural epoxy adhesive was modified by using functionalized h-BN nanoparticles. The structural and thermal properties of the modified adhesives were investigated by scanning electron microscopy and energy dispersion X-ray spectroscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis techniques. Tensile test and dynamic mechanical analysis were performed to determine the mechanical properties of the adhesives. When the results obtained from analysis were examined, it was seen that the nano h-BN particles functionalized with APTES were homogeneously dispersed in the epoxy matrix and formed a strong bond. In addition that, it was concluded from the experimental results that the thermal and mechanical properties of adhesives were improved by adding functionalized nano h-BN particles into epoxy at different ratios.     

Structural,thermal, and mechanical properties of silanized boron carbide doped epoxy nanocomposites

In the presented study, the structural, thermal, and mechanical properties of the nanocomposites were investigated by doping silanized hexagonal boron carbide (h-B₄C) nanoparticles in varying proportions (0.5%, 1%, 2%, 3%, 4%, and 5%) into the epoxy resin by weight. For this purpose, the surfaces of h-B₄C nanoparticles were silanized by using 3-(glycidyloxypropyl) trimethoxysilane (GPS) to improve adhesion between h-B₄C nanoparticles and epoxy matrix. Then, the silanized nanoparticles were added to the resin by ultrasonication and mechanical stirring techniques to produce nanocomposites. The bond structure differences of silanized B₄C nanoparticles (s-B₄C) and nanoparticle doped composites were investigated by using Fourier transform infrared spectroscopy. Scanning electron microscopy and energy dispersion X-ray spectroscopy (SEM-EDS) technique was used to examine the distribution of nanoparticles in the modified nanocomposites. Differential scanning calorimetry and thermogravimetric analysis techniques were used to determine the thermal properties of the neat and s-B₄C doped nanocomposites. The tensile test and dynamic mechanical analysis were performed to determine the mechanical properties. When the experimental results were examined, changes in the bonding structure of the s-B₄C nanoparticles doped nanocomposites and significant improvements in the mechanical and thermal properties were observed. The optimum doping ratio was determined as 2% by weight. At this doping ratio, the T_g, tensile strength and storage modulus increased approximately 18%, 35%, and 44% compared to the neat composite, respectively.     

Chemical,thermal, and mechanical properties and ultraviolet transmittance of novel nano-hydroxyapatite/polyethylene terephthalate milk bottles

Polyethylene terephthalate (PET)/nano-hydroxyapatite (nHAp) composite granules were obtained using twin-screw extruder. Preforms were prepared by injection molding and then PET/nHAp bottles were produced by blow molding. For PET bottles with nHAp, the migration amounts of carboxylic acid (COOH), acetaldehyde (AA), diethylene glycol (DEG), and isophthalic acid (IPA); glass transition temperature (T_g); melting temperature (T_m); and the maximum crystallization temperature (T_cry) were measured. The load-carrying capacity, burst strength, stress cracking, and regional material distribution tests were carried out on the bottles. X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and ultraviolet transmittance analyses were conducted to explain the changes in mechanical, chemical, physical properties, and light transmission of bottles. It was found out that the COOH amount increased and the AA content decreased with increasing nHAp amount. On the other hand, no change was observed in the amounts of DEG and IPA. Although the mechanical properties such as load-carrying capacity and burst strength of the bottles have improved, it has been determined that the standard environmental stress crack resistance test procedure cannot be applied to such a composite. Experimental findings indicate that nHAp disrupts the chemical structure of PET and it isolates harmful chemicals such as AA by forming intermolecular bonds. Moreover, with the addition of up to 0.8% nHAp, PET bottles block the light transmission approximately 80% within 400–700 nm wave length zone. The study demonstrates that the PET/nHAp composite bottles can be used in the food industry, particularly in the packaging of milk and milk products which are vulnerable to light exposure.     

Is LRP2 Involved in Leptin Transport over the Blood-Brain Barrier and Development of Obesity?

The mechanisms underlying the transport of leptin into the brain are still largely unclear. While the leptin receptor has been implicated in the transport process, recent evidence has suggested an additional role of LRP2 (megalin). To evaluate the function of LRP2 for leptin transport across the blood-brain barrier (BBB), we developed a novel leptin-luciferase fusion protein (pLG), which stimulated leptin signaling and was transported in an in vitro BBB model based on porcine endothelial cells. The LRP inhibitor RAP did not affect leptin transport, arguing against a role of LRP2. In line with this, the selective deletion of LRP2 in brain endothelial cells and epithelial cells of the choroid plexus did not influence bodyweight, body composition, food intake, or energy expenditure of mice. These findings suggest that LRP2 at the BBB is not involved in the transport of leptin into the brain, nor in the development of obesity as has previously been described.     

热轧钢管表面三维缺陷检测方法探讨

介绍一种热轧钢管冷态表面三维缺陷在线检测设备。该在线检测设备采用多路三维传感器,360°无死角对通过的钢管进行在线三维成像,通过设定缺陷深度、面积等阈值,可以对三维点坑类缺陷进行高精度识别。该设备检测热轧钢管冷态表面质量时,能有效弥补目前常用的接触式超声波检测、漏磁检测和涡流检测的检测短板。该设备还可以用于穿孔芯棒表面三维缺陷的检测。     

Ytterbium (III) oxide reinforced novel TeO2–B2O3–V2O5 glass system: Synthesis and optical,structural, physical and thermal properties

Different samples of xTeO₂.(25-y)B₂O₃.zV₂O₅.yYb₂O₃ (or TBVY) new glass material were synthesized by the classical melt-quenching method. Structural, optical, physical, and thermal analyses of the synthesized glasses were performed in addition to Monte Carlo simulation to test radiation shielding properties. The results showed that increasing ratios of Yb₂O₃ (y = 0.0, 0.5, 1.0, and 1.5 mol%) produced monotonic density values of the synthesized glasses ranging from 4.70058 g cm^?3 to 5.01038 g cm^?3. XRD and FTIR analyses were used to confirm the glass structure of all samples. Optical transmittance and absorption parameters varied almost monotonically with increasing ratios of Yb₂O₃ indicating the ability to predict and control these properties using Yb₂O₃ additive. Furthermore, simulated radiation interaction parameters, such as attenuation coefficients and half-value layer, exhibited well-behaved dependence on the concentration ratio of the Yb₂O₃ additive. This approach to glass material synthesis demonstrate the useful synergetic effect of combining structural, optical, and radiation characteristics.     

Artificial Intelligence System Approach for Optimization of Drilling Parameters of Glass-Carbon Fiber/Polymer Composites

Silicon - In recent times, the study on machining characteristics of combined (hybrid) fiber polymer composites has drawn a remarkable research attention because of its emerging industrial...     

Downstream Migration of the European Eel (Anguilla Anguilla) in the Elbe River,Germany: Movement Patterns and the Potential Impact of Environmental Factors

Recruitment of European eels (Anguilla anguilla) has declined to the extent that they have been added to the IUCN Red List of Threatened Species. Therefore, it is critical to ensure that eels complete their outward river migration in order to contribute to the available spawning stock. We conducted a 4‐year (2007–2011) telemetry study to understand the migratory behaviour and potential impact of environmental factors on the eel during this critical life stage. Out of 399 female eels tagged with acoustic transmitters, only 28% demonstrated clear downstream migratory behaviour. Fifty‐five percent were detected exhibiting no downstream migration behaviour and 17% were not detected at any monitoring station. Movement patterns of downstream‐migrating (silver) eels were characterized by nocturnal activity and seasonal migration, with distinct peaks in autumn and spring. Migration was often discontinuous and exhibited phases of active locomotion and expanded stopovers. The most important determinants of movement activity were water temperature, cumulative precipitation and moonlight, although the significance varied by season and location in the river basin. Our results evidence a discontinuous, stepwise migration over an extended period. Furthermore, our findings indicate that migration success depends on holding duration prior to tagging and environmental predictors with varying importance depending on the season, as well as the locations of capture, tagging and release. Copyright © 2015 John Wiley & Sons, Ltd.