吸湿凉爽机织物的结构设计与性能

为研究织物组织结构与复合纱线线密度对织物凉爽性能的影响,将线密度为7.4和9.8 tex涤纶分别与线密度为7.8 tex锦纶反向加捻、并线后作为纬纱,以8.3 tex涤纶/竹浆纤维50/50混纺纱作经纱,设计平纹、二上一下斜纹和透孔组织织物.测试织物的瞬间接触凉感、热湿舒适性能及织物干、湿态升温曲线,并采用凉爽温度指数对织物的综合凉爽性能进行评价.研究结果表明:6种设计织物的瞬间接触凉感均高于标准,且平纹织物最好,纬纱粗细对瞬间接触凉感影响不显著;透孔织物透气性最好,且在人体出汗的状态下具有较好的导湿散热性能.平纹织物凉爽温度指数最高,最大凉爽温度为2.8℃,综合凉爽性能最好.     

基于情境感知工具辅助碎片化学习行为的研究

碎片化学习难以集中记录,存在无法迅速定位到自己需要的学习内容等用户体验问题.传统方法不能采集真实情境下的用户数据,无法满足研究人员的研究需求.基于此,开发一种基于用户行为的捕捉工具——CAUX(Context-Aware User Experience,CAUX),设计了具有情境感知能力的数据采集模块,自动捕捉指定App内的用户行为数据.CAUX对用户干扰性低,可以辅助研究人员捕捉典型的碎片化学习行为.对利用CAUX采集到的数据进行处理,并结合人工方法进行分析,可以发现不同情境下的用户行为和用户体验问题.     

Characterizations of friction welding joint interface for AISI 316

Because of heat amount is different from peripheral to central of friction welding interface, which is leaded to vary the characterizations along that interface. Current study, respectively, focused on the effect of different friction pressure on micro-structural and mechanical properties of that friction welding joint interface. Presently, these friction pressures are 110, 130, 150 and 170 MPa while kept all other conditions constant. The effects of different friction pressure on welding interface characterization were investigated by EDX, SEM, tensile, compression, impact and hardness tests. The tensile tests carried out on the standardized test piece with diameter 6 mm and 8 mm, thus, compression tests were extracted from the positions of 0°, 45° 90° with test specimen of 4 mm diameter and 6.5 mm length at weld center. Whereas, the impact test pieces were picked up in two positions, the first one is symmetrical, which it obtained to the respect of the rotation axis and the interface, on the other hand, the second one is non-symmetrical with the axis of rotation and symmetrical to the interface, for making the notch head coincide with the center of the welded joint, The obtained results showed that with reducing of friction pressure will present lack of bonding increasing from peripheral toward the welding center, which will responsible on reducing of the mechanical properties such as tensile, compression and impact strength.     

蛋类礼盒包装结构的缓冲性能研究

目的研究蛋类礼盒包装结构的缓冲性能。方法以蛋类尺寸为基础,建立可发性聚乙烯(expandable polyethylene. EPE)缓冲单元结构和组合结构,进行静态仿真分析和实验验证,比较结构在形状、叠合层数、组合形式等参数变化时的载荷与位移。结果结构层数变化相同时,单元结构的极限载荷从143N增加到236 N,组合结构的极限载荷从224 N增加到476 N,均呈近线性增长。结论蛋类礼盒包装中,组合结构的承载能力优于单元结构,通过单元结构的组合,可满足不同蛋类的包装要求。     

裸眼井中扩张式封隔器力学行为研究

封隔器在石油天然气开采中起着非常重要的作用,而扩张式封隔器在裸眼井中广泛应用。本文采用有限元软件建立了裸眼封隔器与地层的模型,对胶筒在坐封过程中与井壁接触应力的变化进行了研究,并研究了在不同摩擦系数下接触压力的变化,结果表明,建立粗糙井壁面能够更加符合实际情况,胶筒肩部为应力集中的区域,地层与胶筒的接触应力会随着摩擦系数的增加而减小。研究结果为裸眼扩张式封隔器的设计和改进提供了理论依据。     

铝合金熔炼铸造能源与资源节约

在铝材生产中,熔炼、铸造工序是能源与资源消耗多的工序,因此,节约资源、降低烧损与能耗有着重要意义。降低能耗还可以相应地减少温室气体与有害、有毒物质排放,对环保有利。中国当前铝合金熔炼铸造能源与资源节约的主要措施:调整加工用锭坯供应结构,大幅提高电解铝厂供应的锭坯,由2013年供应的42%提高到"十三五"末的65%-70%;加快走出去的力度,到国外去办铝厂,将在国外生产的铝合金锭坯运回来,争取2020年出口的铝材与铝制品全部以进口锭坯加工,这是最大的资源与能源节约;加强废铝回收与有效再生利用;加强创新,大力采用新装备、新技术与新工艺;加强管理,精心操作,管理中还有较大的能源与资源节约潜力。     

基于小角度高位技术的钻孔初采期瓦斯治理

回采工作面初采期瓦斯涌出不均衡,易出现瓦斯超限现象。针对新源煤矿近距离煤层群开采、瓦斯涌出量大等特点,提出了小角度高位钻孔抽采治理初采期瓦斯的方法;2219工作面应用实践表明,初采期内,小角度高位钻孔抽采瓦斯纯量最高5.25m3/min,瓦斯抽采率64.02%,回风流瓦斯浓度最高为0.32%,上隅角最高瓦斯浓度0.96%,未出现瓦斯超限现象,取得了很好的初采期瓦斯治理效果。     

应变纤锌矿ZnO/MgxZn1-xO量子点中离子施主束缚激子的光学性质

Within the framework of the effective-mass approximation and the dipole approximation, considering the three-dimensional confinement of the electron and hole and the strong built-in electric field(BEF) in strained wurtzite Zn O/Mg0:25Zn0:75O quantum dots(QDs), the optical properties of ionized donor-bound excitons(D+, X)are investigated theoretically using a variational method. The computations are performed in the case of finite band offset. Numerical results indicate that the optical properties of(D+, X) complexes sensitively depend on the donor position, the QD size and the BEF. The binding energy of(D+, X) complexes is larger when the donor is located in the vicinity of the left interface of the QDs, and it decreases with increasing QD size. The oscillator strength reduces with an increase in the dot height and increases with an increase in the dot radius. Furthermore, when the QD size decreases, the absorption peak intensity shows a marked increment, and the absorption coefficient peak has a blueshift. The strong BEF causes a redshift of the absorption coefficient peak and causes the absorption peak intensity to decrease remarkably. The physical reasons for these relationships have been analyzed in depth.     

“任务驱动”教学法在可编程控制器课程教学中的实践与分析

以可编程控制器课程为例,介绍"任务驱动"教学法在教学过程中的具体应用,并探讨了实施过程中存在的问题与解决方法。     

落葵浆果天然染料提取及对羊毛织物的染色性能

文章主要研究用水浸法提取落葵浆果天然染料及研究浸提液对羊毛织物的染色性能。以水为提取剂提取落葵浆果天然染料,探讨提取工艺中料液比、提取温度及时间等因素对落葵浆果天然染料提取效果的影响。研究结果表明,落葵浆果水浸提法优化工艺为:料液比1∶20、提取温度70℃、提取时间30 min。落葵浆果天然染料可以对羊毛织物进行染色,媒染染色与直接染色相比,染色深度深且会呈现不同的颜色。由于媒染剂的络合作用,媒染染色色牢度比直接染色普遍高1~2级。