Health resort treatment of eye diseases caused by ischemia]

The authors discuss the results of ophthalmodynamometric tests used for the assessment of cerebro-retinal vessels reactivity following carbon dioxide baths and "peat collars". An analysis of systemic and local blood pressure in the ophthalmic artery measured with Weigelin and Lobstein technique enables to assess changes in blood pressures following a/m balneologic procedures. It was found that blood pressure does not change parallelly due to the mechanism of cerebral autoregulation. Transient decrease in blood pressure in the ophthalmic artery is produced by the dilatation of the internal carotid artery indicating a potent vasodilating action of carbon dioxide.     

混沌信号的主要测量特性分析

初步分析了混沌信号(以Logistic为例)应用于测量中的主要特性。仿真分析了Logistic信号的频谱特性、相关特性、模糊函数。说明了混沌信号在具有较高的距离速度分辨力,同时具备强抗干扰性。对比分析了混沌码和伪随机码的多普勒容限能力。初步分析Logistic信号的抗干扰特性。     

硝基联苯、氨基联苯及啶酰菌胺的高效液相色谱分析方法

建立了一种高效液相色谱定量方法,测定以4-氯-2'-硝基联苯制备4-氯-2'-氨基联苯合成啶酰菌胺路线各步反应中的有效成分含量.采用InertSustain ODS-C18不锈钢柱(250 mm×4.6 mm i.d.×5μm)和二极管阵列检测器,以乙腈和0.02％磷酸水为流动相,流速为1.0 mL/min,在220 nm波长下对中间体4-氯-2'-硝基联苯进行分离和定量分析;在254 nm波长下对中间体4-氯-2'-氨基联苯进行分离和定量分析;在254 nm波长下对啶酰菌胺进行分离和定量.分析结果表明,4-氯-2'-硝基联苯保留时间约24.3 min,线性相关系数为1.0000,标准偏差为0.04,变异系数为0.34％,平均回收率为100.04％;4-氯-2'-氨基联苯保留时间约18.0 min,线性相关系数为1.0000,标准偏差为0.05,变异系数为0.33％,平均回收率为99.94％;啶酰菌胺保留时间约11.9 min,线性相关系数为1.0000,标准偏差为0.21,变异系数为0.32％,平均回收率为100.09％.方法 操作简便,精密度与准确度较高,满足定量分析要求.     

大型薄壁铝铸件表面沟槽缺陷的产生及消除

针对大型薄壁铝铸件内腔表面出现的沟槽缺陷,从差压铸造、树脂砂、铸件结构等工艺条件方面探讨了产生的机理,并通过试验和对比研究,确定排气不畅是该缺陷的首要引发因素,找到了消除该缺陷的工艺方法,提出了相关预防措施,避免了因此产生的废品损失.     

热压变形对灰口铸铁石墨形态的影响

研究了灰口铸铁(HTl50)在900℃大压下量塑性变形后石墨的分布形态，结果表明：随着压下量的增加，石墨片逐渐趋于平行分布；变形过程中发生了碳的回溶，同时伴随着石墨片的断裂；石墨片体积分数及片间距随压下量的增加而逐渐减少。     

The Structure of the Irreversibly Bound Adhesion Promoter-Substrate Interfacial Layer of γ-Aminopropylsilanetriol on Crystalline Si, as Measured by XPS and FTIR

The irreversibly bound interfacial layer deposited by the γ-aminopropysilanetriol adhesion promoter onto a crystalline silicon substrate, which remains even after profuse washing, was found by XPS to have resulted from the fragmentation and rearrangement of the original γ-aminopropylsilanetriol molecule. A mechanism is proposed, involving the homolytic scission of the terminal N-C bond. One of the subsequent reactions is believed to involve hydrogen loss by abstraction and the formation of a terminal vinyl group, which bonds to the substrate. Support for this mechanism is found in IR spectroscopy of this layer.     

浅谈一次盐水的工艺指标控制

介绍了一次盐水的各项工艺指标对生产的影响以及稳定控制这些指标的方法，强调了在生产中控制好一次盐水的工艺指标是影响产品质量及离子交换膜使用寿命的关键。     

环糊精和表面活性剂在室温磷光中的应用

介绍了环糊精和表面活性剂作为有序介质在室温磷光中的研究进展．并对各种方法的特点和应用情况作了简要概括。认为环糊精和表面活性剂混合介质能大大提高发光物质的室温磷光．而且操作简便．应用前景广阔。     

Fabricating Water-Insoluble Polyelectrolyte into Multilayers with Layer-by-layer Self-assembly

Summary A water insoluble azo-containing polyelectrolyte (PEAPB6P-AC) was successfully fabricated into multilayer films based on the layer-by-layer adsorption technique by using N, N-dimethylformamide (DMF) as the assembling media. The multilayer growth and structure were studied with UV-vis spectroscopy, and the multilayer surface were imaged with Atomic Force Microscopy and compared with that fabricated in water. The results show that assembling PEAPB6P-AC in DMF can effectively eliminate the hydrophobic aggregation of the azo units and consequently results in a much smoother multilayer surface than that fabricated in water. This improvement to the layer-by-layer adsorption technique, which can avoid some major difficulties faced when assembling hydrophobic polyelectrolytes in aqueous solutions, seems to be a versatile way to fabricate high quality multilayer films when using the hydrophobic even water-insoluble polyelectrolytes as assembling units.