微机快速傅氏变换图象识别的研究

微机快速傅氏变换图象识别的研究方卯发（湖南师范大学物理系长沙４１００８１）ＳＴＵＤＹＯＮＰＡＴＴＥＲＮＲＥＣＯＧＮＩＴＩＯＮＢＹＦＡＳＴＦＯＵＲＩＥＲＴＲＡＮＳＦＯＲＭＯＮＣＯＭＰＵＴＥＲ￥ＦａｎｇＭａｏｆａ（ＤｅｐａｒｔｍｅｎｔｏｆＰｈｙｓｉｃｓ，...     

A CONFIGURATION SYSTEM FOR FASTENER DESIGN（AN APPROACH TOWARDS COMPUTER AIDED CONCEPTUAL DESIGN）

ＡＣＯＮＦＩＧＵＲＡＴＩＯＮＳＹＳＴＥＭＦＯＲＦＡＳＴＥＮＥＲＤＥＳＩＧＮ（ＡＮＡＰＰＲＯＡＣＨＴＯＷＡＲＤＳＣＯＭＰＵＴＥＲＡＩＤＥＤＣＯＮＣＥＰＴＵＡＬＤＥＳＩＧＮ）ＧｕａｎｇＺｈｏｎｇ；ＭｉｋｅＤｏｏｎｅｒＡＣＯＮＦＩＧＵＲＡＴＩＯＮＳＹＳＴＥ...     

THE CADD AND SIMULATION SYSTEM OFTHE NEW-TYPE GEAR

ＴＨＥＣＡＤＤＡＮＤＳＩＭＵＬＡＴＩＯＮＳＹＳＴＥＭＯＦＴＨＥＮＥＷ－ＴＹＰＥＧＥＡＲＨｏｎｇＨａｎｙｕ；ＧｕａｎＲｏｎｇｃｈａｎｇＴＨＥＣＡＤＤＡＮＤＳＩＭＵＬＡＴＩＯＮＳＹＳＴＥＭＯＦＴＨＥＮＥＷ－ＴＹＰＥＧＥＡＲ￥ＨｏｎｇＨａｎｙｕ；ＧｕａｎＲ...     

COMPUTER GRAPHIC ASSEMBLY TECHNOLOGY FOR COMPOUND-BODY

ＣＯＭＰＵＴＥＲＧＲＡＰＨＩＣＡＳＳＥＭＢＬＹＴＥＣＨＮＯＬＯＧＹＦＯＲＣＯＭＰＯＵＮＤ－ＢＯＤＹ￥ＳｈａｎｇＪｉａｎｚｈｏｎｇ；ＰａｎＣｕｎｙｕｎ（ＤｅｐａｒｔｍｅｎｔｏｆＰｒｅｃｉｓｉｏｎＭａｃｈｉｎａｒｙａｎｄｉｎｓｔｒｕｍｅｎｔＮａｔｉｏｎａ...     

INSTRUCTIONS TO AUTHORS

ＩＮＳＴＲＵＣＴｌＯＮＳＴＯＡＵＴＨＯＲＳＳＭＯＯＴＨＳＵＲＦＡＣＥＩＮＴＥＲＰＯＬＡＴＩＯＮＯＶＥＲＡＲＢＩＴＲＡＲＹＴＲＩＡＮＧＵＬＡＴＩＯＮＳＢＹＳＵＢＤＩＶＩＳＩＯＮＡＬＧＯＲＩＴＨＭＳ￥ＲｕｉｂｉｎＱｕＳｕｂｍｉｓｓｉｏｎｏｆＭａｎｕｓｃｒ...     

A CAD SYSTEM FOR CARPET DESIGN

ＡＣＡＤＳＹＳＴＥＭＦＯＲＣＡＲＰＥＴＤＥＳＩＧＮＭａＹｕｈａｉ；ＷａｎｇＹａｎ；ＳｈｉＷａｎｃｈｕｎＡＣＡＤＳＹＳＴＥＭＦＯＲＣＡＲＰＥＴＤＥＳＩＧＮ￥ＭａＹｕｈａｉ；ＷａｎｇＹａｎ；ＳｈｉＷａｎｃｈｕｎＡｂｓｔｒａｃｔＴｈｉｓｐａｐｅｒｐｒｅｓｅ...     

FRAMEWORK OF A DISTRIBUTED ENGINEERING DBMS

ＦＲＡＭＥＷＯＲＫＯＦＡＤＩＳＴＲＩＢＵＴＥＤＥＮＧＩＮＥＥＲＩＮＧＤＢＭＳＷａｎｇＴａｏ；ＬｉｎＺｏｎｇｋａｉ；ＧｕｏＹｕｃｈａｉＳＭＯＯＴＨＳＵＲＦＡＣＥＩＮＴＥＲＰＯＬＡＴＩＯＮＯＶＥＲＡＲＢＩＴＲＡＲＹＴＲＩＡＮＧＵＬＡＴＩＯＮＳＢＹＳＵＢＤ...     

INTERFERENCE CHECKING IN COMPUTER-AIDED PLANT DESIGN SYSTEM

ＩＮＴＥＲＦＥＲＥＮＣＥＣＨＥＣＫＩＮＧＩＮＣＯＭＰＵＴＥＲ－ＡＩＤＥＤＰＬＡＮＴＤＥＳＩＧＮＳＹＳＴＥＭＷａｎｇＦｅｎｇＺｈａｏＨｏｎｇＮｉｕＪｕｎｙｕＡｂｓｔｒａｃｔＩｎｔｈｉｓｐａｐｅｒ，ｔｈｅｉｎｔｅｒｆｅｒｅｎｃｅｃｈｅｃｋｉｎｇｏｆｔｈｒ...     

COMPUTER AIDED DESIGN OF AIRCRAFT CABIN LAYOUT

ＣＯＭＰＵＴＥＲＡＩＤＥＤＤＥＳＩＧＮＯＦＡＩＲＣＲＡＦＴＣＡＢＩＮＬＡＹＯＵＴ￥ＹａｎｇＧｕｏｎｇ；ＨｕａｎｇＹｕｙｕ（ＢｅｉｊｉｎｇＵｎｉｖｅｒｓｉｔｙｏｆＡｅｒｏｎａｕｔｉｃｓａｎｄＡｓｔｒｏｎａｕｔｉｃｓＢｅｉｊｉｎｇ．１０００８３）Ｐ．Ｒ．...     

线性系统的一种数字仿真方法

线性系统的一种数字仿真方法费景高（北京计算机应用和仿真技术研究所）ＡＭＥＴＨＯＤＦＯＲＤＩＧＩＴＡＬＳＩＭＵＬＡＴＩＯＮＯＦＬＩＮＥＡＲＳＹＳＴＥＭＳ￥ＦｅｉＪｉｎｇ－ｇａｏ（ＢｅｉｊｉｎｇＩｎｓｔｉｔｕｔｅｏｆＣｏｍｐｕｔｅｒＡｐｐｌｉｃａｔｉｏｎ...     

基于AutoCAD的特征造型系统

依据产品特征建模理论，对ＡｕｔｏＣＡＤ１１版实体造型模块进行了特征化，开发了一个用于箱体类零件的特征造型系统ＡＦＭ。该系统能够进行箱体零件的三维ＣＡＤ，并可通过生成的特征数据文件实现与ＣＡＰＰ系统的连接。本文介绍了该系统的设计思想、总体结构及实现方法，并对系统开发中的若干问题进行了讨论。     

Integrating part and assembly modelling

Current modelling systems adequately support either modelling of parts or modelling of assemblies, whereas ideal modelling systems should adequately support both. To achieve this, a new modelling system has been developed, which uses enhanced multiple-view feature modelling. This advanced modelling approach provides specialised interpretations of a product for different development phases, by means of so-called feature views, and ways to keep these interpretations consistent, i.e. to make sure that they all represent the same product. The paper concentrates on the views that support detail design of parts and assembly design of the whole product, and the way these views are related and kept consistent. It describes the features and the tools that can be used to build and maintain the feature models of the views. An example modelling session is given to illustrate the benefits of such integrated modelling.     

一元化特征建模技术研究

特征建模是实现ＣＡＤ／ＣＡＭ以及并行工程中信息集成的键。一元化征建模技术融特征设计和特征识别两者一体，设计阶段的初始设计特征进入应用领域后，经过特征识别器表成领域专用特征。     

Introducing blending operations in feature models

We describe the implementation of a blending facility in the context of a feature modelling system where solid and feature-based modelling operations can be utilized in parallel during the design process of a part. The definition of blends can be done in a graphical user interface by selecting edges to be blended. Feature recognition of blends facilitates the definition process of blends. Alternatively, a special feature editor can be used to add blends to the feature model. The particular implementation style chosen gives rise to aflexible and easy-to-use modelling tool.     

Adaptability Feature''''s Concept, Modeling and Application in Product Design

1 Introduction In practical, commonly the component structure design needs to begin from assemble. During the early design phase, it requires an initial correlation definition and configuration form definition for those important components and the spatial orientation layout design. In the following stages, the component structure details are gradual refined based on those pre-defined constraints and layout scheme, e.g. hole-and-cylinder mating, slot-and-key coupling etc. The design scheme ne…     

Multiple-view feature modelling for integral product development

To allow a designer to focus on the information that is relevant for a particular product development phase, is an important aspect of integral product development. Unlike current modelling systems, multiple-view feature modelling can adequately support this, by providing an own view on a product for each phase. Each view contains a feature model of the product specific for the corresponding phase. An approach to multiple-view feature modelling is presented that supports conceptual design, assembly design, part detail design and part manufacturing planning. It does not only provide views with form features to model single parts, as previous approaches to multiple-view feature modelling did, but also a view with conceptual features, to model the product configuration with functional components and interfaces between these components, and a view with assembly features, to model the connections between components. The general concept of this multiple-view feature modelling approach, the functionality of the four views, and the way the views are kept consistent, are described.     

支持自顶向下设计的产品功能建模技术

自顶向下的设计模式符合一般的设计规律，而以几何建模技术为主的各种CAD系统难以真正地对这一过程提供支持。本文介绍了一种基于功能单元和功能特征的产品功能模型，它能够表达产品的功能结构和功能关系，并建立对零件形状特征的功能约束。功能建模系统同基于特征的产品建模系统相连接，能够实现自顶向下的产品设计。     

基于实体模型的产品形状特征识别

依据实体造型的特点,从模型空间的特征层入手,搜寻模型空间中的简单形状特征,并根据造型特点获取单个特征在零件模型上的几何拓扑关系,从而实现形状特征的自动识别.通过分析特征实体造型,提出一种基于实体模型的产品形状特征识别方法,并结合微波器件产品开发特征参数提取模块,实现复杂零件模型形状特征的自动识别与提取.该方法为快速建立企业零件库提供途径,也为网络环境下的协同设计和数据共享奠定基础.     

Recognizing manufacturing features from a design-by-feature model

This paper presents a methodology for recognizing manufacturing features from a design feature model. The common feature-feature interacting relationships are categorized. A feature recognition processor first translates the design feature model of a part into an intermediate manufacturing feature tree by handling design features according to their properties and the interacting relationships between features. Through combination, decomposition, and (tool approach direction) TAD-led operations, alternative interpretations of manufacturing feature model for the part are then generated, and the manufacturing feature tree is updated and extended with AND/OR operators to store these interpretations. Finally, a single interpretation with the lowest machining cost will be selected in the manufacturing feature tree. The proposed processor can support a dynamic and effective recognition process of manufacturing features during the design stage of a part. By defining the interactions between volumetric features elaborately, and utilizing design features and auxiliary information, the processor can recognize manufacturing features from complex parts. The processor recognizes not only some essential manufacturing features but also replicate, compound and transition features defined in STEP. The alternative interpretations can be used for a generic manufacturing application environment.     

一种基于自动特征识别确定模具脱模方向的方法

判定脱模方向是实现模具自动设计的第一步,也是评估塑件或浇注件能否模具成型的重要因素,文中以基于广义痕迹的自动特征识别方法来识别塑件模型中的所有特征。首先,通过确定每类塑件特征的候选和可行脱模方向,针对每个识别出的特征,自动产生该特候选的脱模方向,然后把所有具有机或完全相反的候选的脱模方向组成一组,并对每组方向,进行选定的模具因子计算,最终胡定优选的脱模方向。实例测试表明,本文提出的方法具有很高的效