基于作战机群的临近空间通信网体系结构设计

在未来空战中,为实现作战机群之间的超视距通信,提出将临近空间通信平台引入战场。首先结合作战机群战场通信的实际情况,设计了临近空间通信网的网络结构;在此基础上,参考开放系统互连体系(OSI)协议模型和数据链的通信协议模型,设计了临近空间通信网的协议结构;最后对影响临近空间通信网络作战性能的指标进行了评估,结果表明临近空间通信网体系结构的设计具有工程上的可行性。     

基于随机服务系统的雷达对抗效能评估

为分析雷达对抗系统的作战效能,分析了雷达对抗系统的体系结构和作战流程。以目标拦截概率为雷达对抗系统的作战效能指标,采用随机服务系统理论建立了具有不耐烦目标的有限时间等待的单部干扰站和多部干扰站的防空作战效能指标模型。应用随机服务系统理论模型对2种想定的雷达对抗防空体系作战效能的仿真计算,验证了模型的有效性,仿真结果表明,该模型对于评估雷达对抗系统的作战效能是可行和有效的。     

潜艇雷达侦察装备效能评估

雷达侦察装备是现代作战中信息对抗的重要组成部分,其效能的高低将直接影响到作战效果。分析了影响雷达侦察装备效能的各种因素,基于WSEIAC模型建立了效能综合评价的指标体系,应用模糊综合评价的方法建立了数学模型,结果表明应用此方法可准确评估雷达侦察装备的效能,并为其方案论证、研发及作战使用提供参考。     

不同环境条件下的舰载通信对抗系统作战效能分析

分析了ADC武器系统效能评估模型,结合不同环境条件下舰载通信对抗系统作战效能评估需要考虑的因素,对传统ADC评估模型加以改进,建立了考虑环境条件的舰载通信对抗系统作战效能评估模型和评价指标,并利用该模型对模拟的舰载通信对抗系统进行说明。     

临近空间防空反导预警军事模型研究

进行临近空间飞行器防空反导预警系统体系结构设计时,面临的主要问题之一是设计模拟对象的模型体系.针对该问题,文中以防空和反导任务为应用背景,从可操作性出发,在建立作战体系的基础上,采用系统分析和定量评价的方法,设计了临近空间防空反导预警系统的作战任务模型、作战行动模型和作战效果模型等.研究成果对临近空间防空反导预警系统设计具有参考价值.     

便携式地空导弹武器系统作战效能的模糊综合评价

为科学评估便携式地空导弹的作战效能,本文对便携式地空导弹武器系统进行了全面分析,建立了便携式地空导弹武器系统作战效能综合评价的指标体系。并利用模糊数学方法,确立了该系统的综合评价模型,从而为便携式地空导弹武器系统作战效能的综合评价提供了一种方法。     

基于改进ADC模型的通信对抗装备作战效能评估

针对通信对抗装备作战效能评估的复杂性,在分析了传统ADC模型并对其改进的基础上,构建了通信对抗装备作战效能评估指标体系,实现了对通信对抗装备作战效能的定量评估,并通过实例分析验证了该模型的有效性和科学性,为通信对抗装备作战效能评估提供了一种有效方法。     

一种新的临近空间通信信道模型及其仿真分析

分析了临近空间通信信道的衰减特性,从多径衰落和降雨衰减两个方面综合考虑, 建立了一种新的两状态信道统计模型,使用MATLAB进行了计算机仿真。仿真结果表明,该模 型能够较好地反映临近空间通信的信道特性,对于临近空间通信的开发和研究具有重要意义 。     

基于AHP-云模型的雷达对抗装备组网作战效能评估

作战效能评估对武器装备的作战运用具有重要意义。根据评估指标体系构建原则建立了雷达对抗装备组网系统作战运用评估指标体系,并对指标进行了分析。然后综合运用层次分析法和云模型评估方法对系统效能进行了评估。     

电子对抗条件下的无人机系统效能评估

无人作战飞机作为一种多用途、低费效比的航空武器装备,在信息化作战条件下的局部战争中发挥的作用日益显著。针对无人机电子对抗效能评估问题,建立无人机对抗综合效能指标体系,使用云理论和层次分析相结合的方法,对无人机在电子对抗环境下的系统效能进行评估,通过实例证明了该模型的可行性。     

Development of the readout system for waveguide multilayer optical card

Waveguide multilayer optical card （WMOC） is a novel storage device of three-dimensional optical information. An advanced readout system fitting for the WMOC is introduced in this paper. The hardware mainly consists of the light source for reading, WMOC, motorized stages addressing unit, microscope imaging unit, CCD detecting unit and PC controlling ＆ processing unit. The movement of the precision motorized stage is controlled by the computer through Visual Basic （VB） language in software. A control panel is also designed to get the layer address and the page address through which the position of the motorized stages can be changed. The WMOC readout system is easy to manage and the readout result is directly displayed on computer monitor.     

Nanoimprint Lithography -A Next Generation High Volume Lithography Technique

IntroductionNanoimprint Lithography is a well-acknowl-edged low cost, high resolution, large area pattern-ing process. It includes the most promising methods,high-pressure hot embossing lithography (HEL) [2],UV-cured imprinting (UV-NIL) [3] and micro contactprinting (m-CP, MCP) [4]. Curing of the imprintedstructures is either done by subsequent UV-lightexposure in the case of UV-NIL or by cooling downbelow the glass transition temperature of the ther-moplastic material in case of HEL…     

Collinear phase-matching study of terahertz-wave generation via difference frequency mixed in GaAs and Inp

The collinearly phase-matching condition of terahertz-wave generation via difference frequency mixed in GaAs and InP is theoretically studied. In collinear phase-matching, the optimum phase-matching wave hands of these two crystals are calculated. The optimum phase-matching wave bands in GaAs and lnP are 0.95-1.38μm and 0.7-0.96μm respectively. The influence of the wavelength choice of the pump wave on the coherent length in THz-wave tuning is also discussed. The influence of the temperature alteration on the phase-matching and the temperature tuning properties in GaAs crystal are calculated and analyzed. It can serve for the following experiments as a theoretical evidence and a reference as well.     

Effects of the alloy compositions on the phonon-polaritons in ternary mixed crystals

Composition dependence of bulk and surface phonon-polaritons in ternary mixed crystals are studied in the framework of the modified random-element-isodisplacement model and the Bom-Huang approximation. The numerical results for Several Ⅱ - Ⅵ and Ⅲ- Ⅴ compound systems are performed, and the polariton frequencies as functions of the compositions for ternary mixed crystals AlxGa1-xAs, GaPxAS1-x, ZnSxSe1-x, GaAsxSb1-x, GaxIn1-xP, and ZnxCd1-xS as examples are given and discussed. The results show that the dependence of the energies of two branches of bulk phonon-polaritons which have phonon-like characteristics, and surface phonon-polaritons on the compositions of ternary mixed crystals are nonlinear and different from those of the corresponding binary systems.     

Influence of PVK ： NPB hole transporting layer on the characteristics of organic light-emitting devices

A doping system consisting of NPB and PVK is employed as a composite hole transporting layer （CHTL）. By adjusting the component ratio of the doping system, a series of devices with different concentration proportion of PVK ： NPB are constracted. The result shows that doping concentration of NPB enhances the competence of hole transporting ability, and modifies the recombination region of charge as well as affects the surface morphology of doped film. Optimum device with a maximum brightness of 7852 cd/m^2 and a power efficiency of 1.75 lm/W has been obtained by choosing a concentration proportion of PVK ： NPB at 1：3.     

New insert layer structure OLEDs

An insert layer structure organic electroluminescent device（OLED） based on a new luminescent material （Zn（salen）） is fabricated. The configuration of the device is ITO/CuPc/NPD/Zn（salen）/Liq/LiF/A1/CuPc/NPD/Zn（salen）/Liq/LiF/A1. Effective insert electrode layers comprising LiF（1nm）/Al（5 nm） are used as a single semitransparent mirror, and bilayer cathode LiF（1 nm）/A1（100 nm） is used as a reflecting mirror. The two mirrors form a Fabry-Perot microcavity and two emissive units. The maximum brightness and luminous efficiency reach 674 cd/m^2 and 2.652 cd/A, respectively, which are 2.1 and 3.7 times higher than the conventional device, respectively. The superior brightness and luminous efficiency over conventional single-unit devices are attributed to microcavity effect.     

Analysis of error performance on Turbo coded FDPIM

Due to variable symbol length of digital pulse interval modulation（DPIM）, it is difficult to analyze the error performances of Turbo coded DPIM. To solve this problem, a fixed-length digital pulse interval modulation（FDPIM） method is provided. The FDPIM modulation structure is introduced. The packet error rates of uncoded FDPIM are analyzed and compared with that of DPIM. Bit error rates of Turbo coded FDPIM are simulated based on three kinds of analytical models under weak turbulence channel. The results show that packet error rate of uncoded FDPIM is inferior to that of uncoded DPIM. However, FDPIM is easy to be implemented and easy to be combined, with Turbo code for soft-decision because of its fixed length. Besides, the introduction of Turbo code in this modulation can decrease the average power about 10 dBm, which means that it can improve the error performance of the system effectively.     

A method for calculating the center position of collimated light

It is a key problem to accurately calculate beam spots＇ center of measuring the warp by using a collimated laser. A new method, named double geometrical center method （DGCM）, is put forward for the first time. In this method, a plane wave perpendicularly irradiates an aperture stop, and a charge couple device （CCD） is employed to receive the diffraction-beam spots, then the geometrical centers of the fast and the second diffraction-beam spots are calculated respectively, and their mean value is regarded as the center of datum beam. In face of such adverse instances as laser intension distributing defectively, part of the image being saturated, this method can still work well. What＇s more, this method can detect whether an unacceptable error exits in the courses of image receiving, processing and calculating. The experimental results indicate the precision of this method is high.     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.