面向无线传能的磁耦合通信射频链路解耦设计

针对磁耦合无线能量数据协同传输中传能链路与通信链路的解耦需求,在采用DD型通信线圈与传能线圈实现空域解耦的基础上,开展了滤波网络与线圈的协同设计,提升了通信链路通带阻抗匹配特性和带外抑制能力,并进一步引入带阻滤波网络,增强了与传能线圈的频域解耦。在耦合距离为30 mm时,搭建了与167 kHz无线传能天线共口径的磁耦合通信天线与滤波馈电网络硬件,在中心频率14.8 MHz实现了4 MHz的-3 dB通带带宽,该解耦天线系统相比DD线圈天线对传能信号提高了85 dB的抑制能力。     

无线无源声表面波传感器的天线匹配方法

针对无源无线声表面波传感器无线信号的有效传输,提出了一种无线无源声表面波传感器的天线阻抗匹配方法。该方法根据声表面波传感器的阻抗特性,可直接进行天线设计,并使天线的输入阻抗与声表面波传感器的输出阻抗共轭匹配。实践中,利用声表面波传感器的梅森(Mason)等效电路模型,及由微带传输线和分布式电容构成的匹配网络,在传感器谐振点附近频率段内,对传感器和天线进行共轭匹配及性能优化。对比共轭匹配前、后的仿真结果可知,声表面波传感器得到了最大的功率传输。     

用于无线传输的分形折叠偶极子天线

无线传输系统是可视化网络服务平台的重要组成部分,直接决定了可视化网络服务平台的应用前景,而天线设计是决定无线传输系统性能的关键技术之一。本文针对无线传输系统对天线的要求,设计了一款π型分形折叠偶极子天线,用矩量法对所设计的天线进行仿真分析;用腐蚀工艺制版法制作天线样品,并对天线的性能进行测试。测试结果显示该天线能够同时实现小尺寸、低厚度、低回波损耗、大工作带宽和全向辐射这五个要求。     

Q值对无源压力传感器无线信号传输的影响

主要研究了无源压力传感器的无线信号传输性能。传感器结构由压力敏感电容空腔和电感天线组成,内部无需有源器件、电池等。通过压力敏感结构电感天线的金属层厚度、线宽等因素的改变来研究无线信号传输性能。经过实验测试,电感的品质因数Q对传感器的信号传输是有影响的。电感天线的金属层加厚、线宽加宽,可以减小电感的电阻,从而增大传感器电感的Q值,有利于无线信号的传输。     

基于低压电力线传输网的无线光通信研究

介绍一种低压电力线传输网与无线红外传输相结合的通信机制,分析了调制方式、信号耦合方式和阻抗匹配以及影响信号传输的因素,给出了增强带负载能力和消除电力线负载效应的解决方法。实验表明,选择合适的调制方式与载波频率可降低电力线信道噪声的影响,实现了低压电力线与大气信道视距内信号稳定可靠传输,为短距离无线光通信提供一种新方法。     

无源UHF RFID标签的低成本阻抗匹配网络设计

提出了一种符合ISO/IEC18000-6C标准的无源RFID(射频识别)标签的低成本阻抗匹配网络。该设计基于复功率波反射系数的概念,修正芯片输入阻抗,在片内添加阻抗匹配电路。通过变化芯片阻抗和天线共轭匹配及失配间切换,有效完成信号的调制反射。提出的电路结构简单,易于实现,在读写器、标签天线和芯片之间实现了功率传输的最大化,提高了芯片输入电压以及读写器对标签反射信号的识别率。采用该阻抗匹配网络的芯片基于chartered 0.35μm CMOS工艺实现。测试结果表明,在923MHz频带下,倍压电路输出可达1.47V,标签满足系统设计要求。     

可视距无线传输距离的影响因素分析

设计了以ZigBee为基础的无线装置。以实际传输距离的估算方法和实际测试值分析了影响传输距离的各种因素。通过实测实验分析得出收发天线的增益、天线的架设高度等各个因素在无线传输中的作用,为以后无线装置的实际应用提供了可靠的参考价值。     

长线传输的阻抗匹配设计

通过计算长线传输中的阻抗匹配和设计隔离电路,达到了减少高频信号反射,提升能源效益的目的.根据多种设计原则,提出了一种行之有效的匹配方法.采用该匹配方法可减小雷达信号的传输误差,并为测试系统技术在阻抗匹配研究中的应用,以及分析控制特征阻抗带来一定的参考价值.     

一种宽带微带八木天线的设计

针对传统八木天线体积过大,难以与其他载体共形,相对带宽很窄的问题,设计了一种宽带微带八木天线。天线采用一种比较简单的馈电方式减小天线的尺寸,利用附加寄生贴片、振子耦合枝节和金属化孔的方式展宽频带和改善天线的阻抗匹配。使用Ansoft公司高频结构仿真器(HFSS)对天线进行仿真设计和优化,并对实物进行测试。最后结果表明,所设计、制作的天线频段在1.81~2.57 GHz内,电压驻波比(VSWR)小于2,相对带宽为31%,在2.4 GHz频率处的增益大于9 dB。仿真和测试结果显示,该宽带微带八木天线基本达到设计要求。     

基于神经信号采集技术的无线传输片上系统研究

基于生物电信号的幅频特性,研究了高精度、低噪声和低功耗的信号采集与无线传输方法和优化理论。通过SMIC 180 nm 1P6M标准CMOS工艺设计实现了一款用于自由活动被测体的神经电信号采集和无线传输芯片。主要论述了射频电路设计,在该生物电信号采集和传输系统中采用无线方式对信号进行传输,为了增加其通用性,兼顾板级天线互连及其面积尺寸,依据科学研究、教育和商用的开放频段(2.4~2.438 GHz)对无线收发组件进行研究和设计。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.     

Critical Stage Rule-Based Real Time Dispatch（RTD）System in Highly-Mixed-Products （HMP） FAB

An improving utilization and efficiency of critical equipments in semiconductor wafer fabrication facilities are concerned. Semiconductor manufacturing FAB is one of the most complicated and cost sensitive environments. A good dispatching tool will make big difference in equipment utilization and FAB output as a whole. The equipment in this paper is In-Line DUV Scanner. There are many factors impacting utilization and output on this equipment group. In HMP environment one of the issues is changing of reticule in this area and idle counts due to load unbalance between equipments. Here we'll introduce a rule-based RTD system which aiming at decreasing the number of recipe change and idle counts among a group of scanner equipment in a high-mixed-products FAB.