周视扫描成像系统的转台转速高精度控制

为实现基于转台的像移补偿型周视扫描成像系统的高分辨率稳定成像,提出了一种复合控制算法对永磁同步电机驱动的扫描转台进行转速跟踪控制。根据转台的载荷特点及电机的数学模型,建立了包含机械参数不确定性和快变转矩扰动的单采样率控制系统模型;采用快速非奇异终端滑模和扩张高增益观测器复合控制实现了转速跟踪控制;采用快速非奇异终端滑模实现了最大转矩电流比控制;最后,分析并验证了基于上述复合算法的转速跟踪控制性能。实验表明:在转台转速设定为120 r/min或240 r/min时,采用该复合算法的转速跟踪误差均小于0.1%。与PI控制、快速非奇异终端滑模控制及线性滑模+观测器控制相比,采用该复合算法的转台转速响应具有无超调、抗扰动性能更强、跟踪精度更高的优点,能保证所述周视成像系统获得清晰稳定的周视全景图像。     

Adaptive sliding mode current control with sliding mode disturbance observer for PMSM drives

This paper focuses on the current control of a permanent magnet synchronous motor (PMSM) for electric drives with model uncertainties and external disturbances. To improve the performance of the PMSM current loop in terms of the speed of response, tracking accuracy, and robustness, a hybrid control strategy is proposed by combining the adaptive sliding mode control and sliding mode disturbance observer (SMDO). An adaptive law is introduced in the sliding mode current controller to improve the dynamic response speed of the current loop and robustness of the PMSM drive system to the existing parameter variations. The SMDO is used as a compensator to restrain the external disturbances and reduce the sliding mode control gains. Experiments results demonstrate that the proposed control strategy can guarantee strong anti-disturbance capability of the PMSM drive system with improved current and speed-tracking performance.     

基于扰动观测器的永磁同步电机电流环自适应滑模控制

针对扰动对永磁同步电机转速伺服系统性能的影响,提出了基于扰动观测器的电流环自适应滑模控制方法。设计了自适应律在线估计系统的内部参数摄动以补偿模型不确定性扰动。同时,设计了滑模扰动观测器实时估计系统外部负载扰动,并将观测值前馈补偿到电流环自适应滑模控制器,在提高系统鲁棒性的同时降低滑模控制系统的抖振。实验结果显示,采用基于扰动观测器的电流环自适应滑模控制方法,系统可快速、准确、无超调地跟踪900r/min的速度指令,调节时间为0.08s,稳态误差为±5r/min。加入0.6N·m的负载扰动,该控制方法的最大转速波动为21r/min,比PI控制方法的转速波动减小了3.4%。仿真和实验结果表明,基于扰动观测器的电流环自适应控制方法提高了永磁同步电机转速伺服系统的鲁棒性和动态响应性能,同时可有效抑制滑模控制系统的抖振。     

Adaptive sliding mode disturbance rejection control with prescribed performance for robotic manipulators

This study proposes an adaptive sliding mode disturbance rejection control with prescribed performance for robotic manipulators. A transformation with respect to tracking error using certain performance functions is used to ensure the transient and steady-state performances of the trajectory tracking control for robotic manipulators. Using the transformed error, a nonsingular terminal sliding mode surface is proposed. A continuous terminal sliding mode control (SMC) is presented to stabilize the system. To compensate for the uncertainty and external disturbance, a novel sliding mode disturbance observer is proposed. Considering the unknown boundary of the derivative of a lumped disturbance, an adaptive law based on the idea of equivalent control is designed. Combining the adaptive law, continuous nonsingular terminal SMC, and sliding mode disturbance observer, the adaptive sliding mode disturbance rejection control with prescribed performance is developed. Simulations are carried out to demonstrate the effectiveness of the proposed approach.     

永磁同步电机的模糊滑模控制

为了实现高性能永磁同步电动机伺服系统快速而精确的位置跟踪控制,在滑模控制策略中引入模糊控制算法,设计了基于模糊规则的滑模控制器;并通过理论分析和控制仿真,证实了模糊滑模控制很好地解决了抖振问题,对参数变化和负载扰动具有很好的鲁棒性,永磁同步电机可获得很好的位置跟踪效果。     

基于误差反馈学习的永磁同步电机变负载有限时间速度控制

针对传统永磁同步电机调速系统面对变负载和大范围调速时,P、I参数需要频繁调整且速度跟踪不理想的问题,提出了一种基于误差反馈学习结构的永磁同步电机有限时间速度控制方法。在对永磁同步电机运动方程分析的基础上,使用非线性PI和径向基神经网络建立了速度环控制器模型。前者保证控制系统收敛和稳定,其输出作为神经网络的误差学习参数;后者基于终端滑模理论设计参数调整律,加快神经网络的参数收敛速度,使得神经网络的输出逐渐取代非线性PI成为控制系统的主要控制器。利用李雅普诺夫稳定判据分析了控制器的收敛性,并在永磁同步电机调速系统上进行了试验。研究结果表明,基于误差反馈学习结构的有限时间控制策略能够减小系统静态误差和抖振,具有一定的抗干扰能力。     

基于负载观测器的PMSM分数阶滑模位置控制

针对永磁同步电机位置控制系统,设计分数阶滑模变结构控制器,以代替传统PID三闭环串级控制结构的转速环和位置环控制器。针对电机运行时负载转矩会受到外界干扰的问题,设计负载转矩观测器。仿真结果表明分数阶滑模控制器有良好的动态和稳态性能以及良好的鲁棒性。     

基于干扰观测器的时滞非线性切换系统滑模控制方法

为实现更加精准的时滞非线性切换系统滑模控制,应用干扰观测器设计一种新的系统滑模控制方法。构建时滞非线性切换系统模型,针对系统在发生结构变化时会产生复合干扰变化的情况,设计了一种非线性切换干扰观测器,实施系统不连续干扰的估计。通过 Backstepping 方法结合干扰观测器,设计一种切换滑模控制器,依据标量非线性特性打造一个滑模面,通过滑模控制器算法使时滞非线性切换系统能够满足滑模面的实际可达性条件,完成切换滑模控制器设计,实现系统的滑模控制。对设计的滑模控制方法进行测试,实验中选择的时滞非线性切换系统为一种变后掠翼 NSV 。实验结果表明,该设计方法能够实现较为准确地切入信号跟踪,表现出了很好的切换复合干扰估计性能。     

基于模糊滑模控制和两级滤波滑模观测器的PMSM改进控制策略

针对传统带有滑模观测器的永磁同步电机控制系统中转矩脉动大、抖振明显、反电动势估计精度差等问题,提出基于模糊滑模控制和两级滤波滑模观测器的PMSM改进控制策略.首先,在速度环提出基于双曲正弦函数的新型趋近率,结合模糊控制思想对趋近率参数实现自整定,设计了一种基于新型趋近率的模糊积分滑模速度环控制器,并且对新型趋近率的抖振抑制效果给出严格分析.其次,提出基于变截止频率低通滤波器和修正反电动势观测器的两级滤波结构,抑制反电动势中的高频分量和测量噪声,并对转子位置进行合理补偿,继而设计了两级滤波滑模观测器;通过Lyapunov判据对本文提出控制策略的稳定性进行了推导证明.仿真和实验结果表明,与传统滑模观测器相比,改进的控制器使电机在启动和受到外部扰动时系统响应良好,有效改善了转矩脉动、抖振、反电动势的估计精度等问题.     

基于滑模和扩张状态观测器的双绕组无轴承磁通 切换电机转子悬浮控制策略研究

双绕组无轴承磁通切换电机是非线性多变量的复杂对象,传统的转速PI与径向位移PI控制存在超调大,系统易受外界扰动影响等缺点。基于滑模变结构控制思想,提出一种转子径向位移滑模控制策略。针对滑模控制中存在建模不准确,以及转子动力学模型中存在陀螺效应等问题,通过建立一种扩张状态观测器对系统扰动进行观测,并在滑模控制基础上加入扰动前馈补偿,设计出一种径向位移滑模控制与扩张状态观测器的复合控制策略。实验结果表明,所提径向位移滑模控制相比传统PI控制具有响应速度快、径向位移脉动小、抗负载扰动性强等优点。所提径向位移滑模与扩张状态观测器的复合控制策略,相比于径向位移滑模控制可有效减小转子径向位移脉动约30%,进一步增强了系统的鲁棒性。     

基于并联RSO优化自抗扰的PMSM速度控制

为提高永磁同步电机调速系统的速度精度及抗干扰能力,提出一种并联降阶状态观测器优化线性自抗扰控制的方法.对传统线性扩张状态观测器进行改进,设计了降阶状态观测器.为了提升控制器在有限带宽内的抗扰动能力,设计并联型的降阶状态观测器.仿真结果表明,控制系统的速度精度和鲁棒性得到明显的提升.     

Sliding mode based fault detection,reconstruction and fault tolerant control scheme for motor systems

The fault-tolerant control problem belongs to the domain of complex control systems in which inter-control-disciplinary information and expertise are required. This paper proposes an improved faults detection, reconstruction and fault-tolerant control (FTC) scheme for motor systems (MS) with typical faults. For this purpose, a sliding mode controller (SMC) with an integral sliding surface is adopted. This controller can make the output of system to track the desired position reference signal in finite-time and obtain a better dynamic response and anti-disturbance performance. But this controller cannot deal directly with total system failures. However an appropriate combination of the adopted SMC and sliding mode observer (SMO), later it is designed to on-line detect and reconstruct the faults and also to give a sensorless control strategy which can achieve tolerance to a wide class of total additive failures. The closed-loop stability is proved, using the Lyapunov stability theory. Simulation results in healthy and faulty conditions confirm the reliability of the suggested framework.     

基于非线性干扰观测器的自动弹仓终端滑模控制

针对某自动弹仓位置控制过程中的负载变化和不确定性干扰,设计了基于干扰观测器和非奇异快速终端滑模的复合控制策略,建立了自动弹仓的不确定性动力学模型。干扰观测器用于估计系统复合干扰,估计值用于补偿滑模控制器以增强控制器的鲁棒性和抗干扰能力。运用Lyapunov准则证明了系统闭环稳定。所提算法和PID算法的对比实验结果显示,设计的控制律实现了自动弹仓位置的精确控制,具有良好的鲁棒性,有效提高了自动弹仓的定位稳定性。     

Adaptive super-twisting sliding mode observer based robust backstepping sensorless speed control for IPMSM

This paper proposes a higher-order sliding mode observer based robust backstepping control to realize high-performance sensorless speed regulation for the interior permanent magnet synchronous motor (IPMSM). A new robust adaptive super-twisting higher-order sliding mode based observer is proposed to estimate the rotor position. The proposed observer has advantages of sliding chattering reduction and robustness against uncertainties. And, a new robust integral adaptive backstepping control with sliding mode actions is designed to achieve precise speed regulation. The uncertainties with unknown bounds can be stabilized by the sliding mode actions. And both transient and steady performance can be achieved by using the sliding mode and integral actions simultaneously. Then, a sensorless scheme is put forward to by combining the presented observer and the proposed controller. The stability of the observer and controller are verified. Simulation and experiment results validate the proposed approach.     

Continuous high order sliding mode controller design for a flexible air-breathing hypersonic vehicle

This paper investigates the problem of tracking control with uncertainties for a flexible air-breathing hypersonic vehicle (FAHV). In order to overcome the analytical intractability of this model, an Input–Output linearization model is constructed for the purpose of feedback control design. Then, the continuous finite time convergence high order sliding mode controller is designed for the Input–Output linearization model without uncertainties. In addition, a nonlinear disturbance observer is applied to estimate the uncertainties in order to compensate the controller and disturbance suppression, where disturbance observer and controller synthesis design is obtained. Finally, the synthesis of controller and disturbance observer is used to achieve the tracking for the velocity and altitude of the FAHV and simulations are presented to illustrate the effectiveness of the control strategies.     

挖掘机基于干扰观测器的滑模控制

针对挖掘机工作装置的参数不确定和存在干扰的问题,将滑模控制用于挖掘机工作装置的轨迹跟踪控制中。为了削弱滑模控制中存在的抖振,设计了干扰观测器,对干扰项进行有效估计以降低滑模控制中的切换增益。利用Matlab／Simulink工具箱对所设计的控制器进行了仿真,给出了基于干扰观测器的滑模控制的跟踪性能及误差。     

基于降阶负载扰动观测器的永磁同步电机控制

针对永磁同步电动机(PMSM)的负载扰动问题,提出了一种基于降阶负载扰动观测器的永磁同步电机前馈控制方法。通过设计降阶负载观测器来实时观测电机负载转矩变化,并将观测值作为电流前馈补偿来增加系统鲁棒性;考虑到转动惯量对观测器的影响,引入了梯度校正参数估计法,对电机的转动惯量进行了实时辨识;最后,将负载转矩观测与永磁同步电机的矢量控制相结合,对永磁同步电机的q轴分量进行了转矩前馈补偿以提升系统的动态性能。仿真结果表明,采用梯度校正参数估算法能快速准确地迭代计算永磁同步电机的转动惯量,所设计的降阶负载扰动观测器能有效地估计转矩变化。研究结果表明,基于降阶负载转矩观测器的前馈补偿与永磁同步电机矢量控制相结合,能有效地提升永磁同步电动机转速控制的鲁棒性。     

机械臂反演非奇异终端的神经滑模控制

为了解决具有外部干扰以及建模误差的多关节机械臂的轨迹跟踪问题,提出了一种机械臂反演非奇异终端的神经滑模控制方法。采用非奇异终端的滑模面,基于反演方法以及滑模控制的原理,设计了反演滑模控制器。针对由于外部干扰以及建模误差引起的反演滑模控制系统中不确定的因素上界,设计了径向基(radial basis function,简称RBF)神经网络的自适应律,对不确定因素上界进行了在线估计,并对控制系统的稳定性使用了Lyapunov定理进行证明。仿真分析结果表明,所提出的方法不仅可以减少系统中存在的抖振现象,而且具有较好的轨迹跟踪性能和较强的鲁棒性。     

Finite-time tracking control of nth-order chained-form non-holonomic systems in the presence of disturbances

This paper addresses the problem of finite-time tracking controller design for nth-order chained-form non-holonomic systems in the presence of unknown disturbances. To this aim, a generalized disturbance observer based controller is proposed and combined with a recursive terminal sliding mode approach which guarantees finite-time convergence of the disturbance observer dynamic. By introducing a time-varying transformation and introducing a new control law, the existence of the sliding around the recursive terminal sliding mode surfaces is guaranteed. Finally, the proposed approach is applied for a wheeled mobile robot with a fourth-order chained-form non-holonomic model. The simulation results demonstrate the desirable and robust tracking performance of the proposed approach in the presence of unknown disturbance.