共查询到19条相似文献,搜索用时 156 毫秒
1.
2.
当前传感器向着微型化、数字化、智能化、网络化的方向发展,论文从网络化智能传感器的结构和特点入手,结合以太网和TCP/IP协议的功能特点,以W78E58单片机为核心控制器,以8029芯片为网络接入模块,提出了一种基于以太网的智能传感器设计思想,重点论述了该网络传感器的网络接口的软硬件设计方法。实验表明,采用该方法设计的以网络传感器具有良好的检测性能和网络通信性能,并且具有成本低廉、结构简单、组网灵活等优点。该网络传感器已经成功应用在广东省农业现代化的环境因子网络测控平台上。 相似文献
3.
当前传感器向着微型化、数字化、智能化、网络化的方向发展,论文从网络化智能传感器的结构和特点入手,结合以太网和TCP/IP协议的功能特点,以W78E58单片机为核心控制器,以8029芯片为网络接入模块,提出了一种基于以太网的智能传感器设计思想,重点论述了该网络传感器的网络接口的软硬件设计方法.实验表明,采用该方法设计的以网络传感器具有良好的检测性能和网络通信性能,并且具有成本低廉、结构简单、组网灵活等优点.该网络传感器已经成功应用在广东省农业现代化的环境因子网络测控平台上. 相似文献
4.
5.
6.
7.
基于总线技术的网络智能传感器研究 总被引:1,自引:0,他引:1
针对当前工业领域中传感器小型化、智能化和网络化的发展趋势,在分析网络化智能传感器特点的基础上,开发了一种基于CAN总线的网络化智能传感器节点,详细论述了系统的硬件和软件设计,其中软件分别介绍了总线通讯模块和温度补偿模块。最后,通过三个传感器节点试验验证,该网络化智能传感器测量精度明显提高,克服了传统传感器在精确测量、数字化和组网等方面的不足,可以在工业领域推广和应用。其研究方法和技术还可推广到其它传感器应用系统中。 相似文献
8.
9.
基于IEEE1451的机器人网络感知系统研究 总被引:3,自引:0,他引:3
机器人所需要的多种传感器和执行器的兼容与接口问题日益突出.为降低建立和维护机器人感知系统的成本与复杂度,提高可靠性,本文基于智能化、网络化的设计思想.借助IEEE 1451智能变送器接口标准和现场总线技术,搭建了一个分布式、开放的机器人网络化感知系统。并针对传感器即插即用和传感器静、动态标定与性能评估等需求,详细介绍了感知系统的软硬件构成与网络接口设计。实测结果表明,系统运行稳定,实时性良好,为机器人实现更高级智能,完成更复杂任务提供了一个可靠的平台。 相似文献
10.
11.
Intelligent service processing in common USN middleware 总被引:1,自引:1,他引:0
The Ubiquitous sensor network (USN) is composed of several heterogeneous sensors with a variety of characteristics. An application
based on the sensor network also has various requirements to provide services to users. Therefore it is important to develop
the common USN middleware for flexible integration between the sensor networks and applications. Especially, this paper focuses
on intelligent service management which is one of the main functions of USN middleware. Several applications in the sensor
network environment support not only monitoring services, but also sensor-based context-awareness and intelligent services.
In many applications, however, approaches to support intelligent services depend on the application because the standard method
has been undefined yet. Therefore this paper proposes a common method for processing intelligent services in USN middleware
independent of an application. The proposed method is implemented and evaluated as a component of USN middleware. 相似文献
12.
13.
He Yongqiang 《Computational Intelligence》2020,36(4):1663-1671
To reduce the uneven energy consumption for the data transmission and extend network life of intelligent community sensor network, an adaptive routing optimized algorithm for intelligent community sensor networks with cluster head election is proposed. In this algorithm, a three-dimensional clustering method adapted to the structure of intelligent community sensor network is proposed. The three-dimensional clustering method uses the cluster head election mechanism based on minimizing the total transmission loss to optimize the energy of the intelligent community sensor network. Second, an adaptive ant colony propagation method is proposed to solve the problem of intercluster data propagation after clustering. With the best path finding algorithm of ant colony algorithm, energy balance routing with lower energy loss and lower packet error rate is proposed. Finally, the simulation results show that the algorithm has better performance in reducing energy consumption and delay, improving transmission efficiency and node survival time. 相似文献
14.
本文介绍了基于RISC-V的嵌入式智能小车控制系统的硬件连接方案、基于状态机的智能小车状态分析方法和不同应用场景下的电机控制方案.系统以运行RISC-V软核的FPGA开发板作为智能小车的主控板,通过RISC-V的GPIO模块采集智能小车的超声波传感器和红外传感器信号来分别检测小车前方和后方的障碍物,利用GPIO中断对碰撞检测传感器和倾斜角传感器信号作出快速响应,利用PWM模块实现不同场景下的电机控制.测试结果表明,本文介绍的控制系统能够实现智能小车的自主避障、碰撞检测和姿态检测等功能. 相似文献
15.
16.
17.
18.
19.
一种智能加速度传感器的设计与实现 总被引:1,自引:0,他引:1
针对目前加速度传感器智能化程度较低的现状,详细介绍了一种智能加速度传感器的信号调理、串行接口等硬件电路设计和软件实现方案,并采用系统自检和数字滤波技术以增强系统的抗干扰性。试验结果证明,该传感器性能稳定,灵敏度可达到0.28mV/g,具有测量精度高、价格较低、灵活可靠的特点,克服了传统加速度传感器测量精度低、元器件精度要求较高、测试系统复杂昂贵、应用范围具有局限性的缺陷,大大提高了加速度测量的自动化水平,具有重要的应用价值。 相似文献