时域无网格算法二维TEz 波电磁散射模拟问题研究

为了分析目标TEz波电磁散射特性,发展了求解二维TEz波电磁散射问题的时域无网格算法。算法涉及的离散点上的空间导数通过在无网格点云结构上引入函数加权最小二乘逼近确定;数值通量则用近似黎曼解计算确定,通量运算涉及的物理量左右状态值,用二次函数重构替代通常的线性重构以提高计算精度,并沿用四步Runge-Kutta格式进行时间推进求解。论文用发展的算法成功模拟了飞行器主体带外挂等模型模拟的二维情形电磁散射场,并给出了对应的双站雷达散射截面(RCS),展示出电磁波照射方向、外挂尺寸以及外挂与主体的相对位置等因素对主体散射特性的影响。     

基于高阶叠层矢量基函数的时域电磁场 积分方程方法

本文将准正交高阶叠层矢量基函数用于时域电磁场积分方程(TDIE),求解了三维金属目标的时域电磁散射问题.准正交高阶叠层矢量基函数定义在曲面四边形单元上,并且不要求网格为规范网格,给复杂目标的几何建模和电磁建模带来很大方便.在空间上利用伽略金方法、时间上采用点匹配法求解时域电磁场积分方程,并采用隐式时间步进算法,数值计算结果表明了该方法求解时域积分方程的精确性、高效性与稳定性.     

利用高阶矢量基函数求解时域磁场积分方程

本文利用一种新的高阶矢量基函数求解了三维时域磁场积分方程,该基函数定义在一个曲边三角形贴片上并用拉格朗日插值多项式来表示每一个贴片内的未知电流密度.该基函数的实质就是将拉格朗日插值多项式的插值点选为高斯积分结点,极大地简化和加快了时域积分方程矩量法的繁琐的时间和空间积分运算;另外,该基函数不要求网格为规范网格,给复杂目标的网格剖分带来很大方便.在空间上利用点匹配方法求解了时域磁场积分方程,数值计算结果表明了该方法求解时域积分方程的精确性和高效性.     

MQ径向基函数的对流扩散方程优化算法

在介绍MQ径向基函数方法求解对流扩散方程原理的基础上,运用近似特别解方法进行无网格求解。通过在Hilbert空间中定义绝对误差,并结合逐一缩减法对求解形参进行优化。对具体对流扩散方程进行无网格计算,比较形参对方程解的误差,从而对形参数值进行选择。计算结果表明,优化后的形参算法结构简单,提高了计算精度,对于控制求解误差具有应用价值。     

面向文物稠密点云模型的压缩复原框架

针对激光扫描仪获取的三维文物稠密点云模型在数据存储、远程传输与处理等环节导致的资源过度消耗问题,提出了一种基于贪婪算法的快速压缩与恢复框架.首先,将点云模型视为三维离散几何信号,用基于哈希函数的八叉树方法构建稠密点云的邻域约束关系.然后,计算点云邻接矩阵并构建离散拉普拉斯基对原信号进行稀疏表示,通过随机高斯矩阵对原信号进行随机采样,以完成信号压缩.最后,引入L0正则化算子,采用四种经典的贪婪算法进行快速求解.用兵马俑头部点云模型和唐三彩胡人俑三维文物点云模型进行仿真测试,结果表明,本框架能完成对稠密点云模型的有效压缩和模型的快速重建.     

求解IETD问题的CFIE方程之比较

针对基于矩量法的积分方程时域求解存在的晚时震荡问题,分析两种稳定求解时域积分方程的混合场积分方程方法:隐式时间步进算法的混合场积分方程和基于拉盖尔多项式阶数步进算法的混合场积分方程。计算了目标的时域散射场和单站雷达散射截面,两种方法求得的结果吻合较好,表明两种方法解决时域积分方程晚时震荡问题的有效性。     

外场作用双导线的电磁耦合时域分析方法

基于时域有限差分（finite-difference time-domain，FDTD）法和传输线方程，并结合插值技术，研究了一种高效的时域混合算法，能够快速模拟电磁波照射自由空间和屏蔽腔内双导体传输线的电磁耦合，并实现空间电磁场与双导线瞬态响应的同步计算.该算法先采用FDTD方法模拟双导线周围空间的电磁场分布，结合插值技术构建适用于双导线电磁耦合的传输线方程，再采用FDTD的中心差分格式进行离散，从而求解得到传输线和端接负载上的瞬态响应.同时，分析双导线间距对其电磁耦合的影响，掌握其耦合规律.通过相应数值算例的模拟，并与FDTD方法进行对比，验证了该时域混合算法的正确性和高效性.     

辛算法的稳定性及数值色散性分析

引入一种新的数值计算方法 —辛算法求解Maxwell方程,即在时间上用不同阶数的辛差分格式离散,空间分别采用二阶及四阶精度的差分格式离散,建立了求解二维Maxwell方程的各阶辛算法,探讨了各阶辛算法的稳定性及数值色散性.通过理论上的分析及数值计算表明,在空间采用相同的二阶精度的中心差分离散格式时,一阶、二阶辛算法(T1S2、T2S2) 的稳定性及数值色散性与时域有限差分(FDTD)法一致,高阶辛算法的稳定性与FDTD法相当;四阶辛算法结合四阶精度的空间差分格式(T4S4) 较FDTD法具有更为优越的数值色散性.对二维TMz波的数值计算结果表明,高阶辛算法较FDTD法有着更大的计算优势.     

DGTD用于RCS计算的初步研究

时域离散伽辽金法(Discontinuous Galerkin Time Domain, DGTD)同时具有时域有限元算法(FiniteElement Time Domain, FETD)非结构网格剖分和时域有限差分算法(Finite Difference Time Domain, FDTD)显式迭代的优点,是一种非常有前途的电磁计算方法,该文首先描述了基于矢量基函数的时域离散伽辽金法的基本原理.然后,给出了DGTD处理散射问题时平面波入射加入的具体实现方法.最后,给出了金属球、介质球和金属弹头宽带散射的算例,算例结果的比较表明了该文算法的正确性和有效性.该文的研究,为复杂目标雷达散射截面RCS的准确预估打下了坚实的基础.      

遗传算法和多重网格在两步线性反演中的应用

基于扩展玻恩近似和电场积分方程,建立起非线性反演方程,然后应用两步线性反演方法进行迭代反演.在反演过程中,采用多重网格技术将待反演区域的离散网格从粗网格逐渐推演到细网格.在迭代前期,待反演区被离散为粗网格,利用实数编码的遗传算法对病态方程进行优化反演,并将其迭代反演结果作为迭代后期的初始值.在迭代后期,待反演区被离散成细网格,则采用共轭梯度(CG)法求解未知量较多的矩阵方程.二维轴对称非均匀介质剖面分布的反演结果表明,本文方法可反演高对比度的散射目标,具有较好的稳定性.     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.     

A rigorous proof of MIMO channel capacity’s increase with antenna number

It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output（MIMO） communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.