一种基于权电阻网络的VGA显示方案设计

本文提出一种基于FPGA技术的权电阻VGA显示方法,该方法不仅以低成本实现了通用VGA接口功能,而且外扩了嵌入式仪器仪表设备芯片级常用总线,只需仪表微处理器单元具有通用的SPI、UART等总线接口方式,即可实现VGA高速图像显示。实验结果表明,该方法通用性强,显示色彩真实,而且可以在不使用VGA显示卡和计算机的情况下实现高速图像的显示。     

TeeChart图形控件在通信监测软件中的应用

介绍了TeeChart的功能特点和属性方法,结合通信监测软件的开发实现,说明了使用方法和应用实例,给出了一些设计经验。该图形控件具有功能强大、使用灵活的特点,非常适合频谱图等图形显示.     

基于MEMS传感器的无线位置跟踪控制仿真应用

针对嵌入式工业控制系统终端显示的需要,提出了一种基于微处理器R1610和LCD控制器SSD1963的液晶显示模块的设计方法。详细阐述了硬件接口电路的设计和控制软件的编程,重点介绍了R1610、SSD1963以及TFT液晶屏AT070TN83之间的硬件连接方法,分析了SSD1963液晶控制的使用方法以及针对液晶屏显示时序的系统设置。结合显示控制实例实现了图像在液晶屏上的显示,显示效果良好。该显示模块的设计具有一定的应用前景和参考价值。     

FoxBASE的PCX图像接口

本文给出了一种FoxBASE的PCX图像接口的实现方法。该方法通过FoxBASE的汇编语言接口来实现在FoxBASE下直接显示PCX图像文件,具有占有用内存小,执行速度快及使用简便等特点。     

Windows下的数据采集和A/D转换

主要论述了使用Visual C 6.0在Windows下实现数据的实时采集和信号的图形显示，其中包括数据采集、A／D转换以及信号的实时显示等。使用面向对象的编程方法，构造了一个通用的A／D转换类，具有很好的可重用性。     

二维图形加速技术研究及其FPGA实现

在嵌入式系统中,图形显示性能越来越受到重视,文章对常用的二维画线和矩形填充算法进行研究,使用Verilog硬件描述语言实现其功能,并在FPGA上进行验证。实践证明,使用文中的方法进行二维绘图,具有明显的加速效果。     

C#中静态图片的特技效果

文章介绍的是在C#.NET中静态图片的特技效果的实现方法,主要使用的是Graphics类的Drawimage方法。Graphics类提供了丰富的方法在窗体上显示图片。该文通过七种效果的实现过程,介绍使用C#.NET显示静态图片的特技效果的实现方法。     

基于ARMLinux的图像采集与解码的实现

以S3C2440和ARMLinux操作系统为基础,研究了视频图像的采集与解码的实现方法.对Linux下的视频采集技术进行了分析,介绍了Video4Linux编程接口的使用方法,以使用USB摄像头采集图像为例,将采集到的JPEG格式的图像数据利用赫夫曼解码及反离散余弦变换等方法,将其解码为RGB格式的图像,最终在LCD上显示.实现了具有视频采集、软件图像解码及显示功能的模块,可以应用到实际中.     

虚拟示波器的设计与实现

虚拟示波器利用LabVIEW图形化编程语言开发实现.它具有数据采集、存储、回放,波形显示,电压、相位、功率测量和远程测控等多种功能.结合虚拟示波器设计与实现过程的实例,具体阐述了使用LabVIEW进行虚拟仪器设计及远程测控的方法、步骤与实现技术.     

基于AT89S51的电能计量系统

介绍了单片电能计量专用芯片AD7751的工作原理和使用方法,给出了系统软硬件的设计方法,对人机接口和单片机的SP编程作了说明,系统实现了单相电量的检测、显示、存储和查询,并具有窃电侦测功能。     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

基于AD9626的模拟信号采集存储卡设计

自然界的绝大部分信号都是以模拟的形式存在,因此模拟信号的采集转换存储在数字时代十分关键。文章讨论了在雷达信号处理领域基于AD9626的AD采集存储卡的设计原理、硬件结构和程序设计与芯片配置等问题,为今后相关领域的研究提供了可参考的方案。     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

A human-computer interface for non-computer specialists

The COM teleconferencing system was designed to be easy to use for both beginners and people with much computer experience. A number of design choices in organizing the human-computer interface were considered very carefully. These design problems are not unique for teleconferencing applications, but will appear in many other developments of human-computer interfaces for non-computer specialists. This report discusses naming conventions, menu format, user commands, help facility and the treatment of ‘type ahead’ from the users.