多级孔材料研究进展

多孔材料具有孔隙率高、比表面积大、导热系数低、体积密度小及化学性质稳定等优点,在吸附与分离、催化剂载体、隔热材料、能量储存、传感器等领域拥有广阔的应用前景。基于孔直径的大小可将多孔材料分为三类:孔径大于50nm的大孔材料(Macroporous materials),孔径介于2～50nm的介孔材料(Mesoporous materials)和孔径小于2nm的微孔材料(Microporous materials)。但是,由于孔径的限制,这三类材料的应用均存在一定的局限性。多级孔材料兼具通透性好、孔隙结构发达、体积密度小、比表面积和孔体积大等优点,打破了传统单级孔材料孔结构单一的局限,因此越来越受到研究人员的关注。然而,多级孔材料在制备中仍存在较多问题。例如,其合成过程通常会涉及到两种及两种以上的方法,制备工艺复杂;现有的多级孔材料的制备成本高,孔结构难以控制。因此,研究者们主要从优化多级孔材料的制备工艺以及降低生产成本等方面入手,制备出孔径均一且可控的多级孔材料。多级孔材料主要有大孔-介孔材料(Macro-mesoporous materials)、微孔-介孔材料(Micro-mesoporous materials)以及含有两种或多种不同孔径的介孔-介孔材料(Meso-mesoporous materials)。大孔-介孔材料常见的制备方法有模板法、发泡法、溶胶-凝胶法及熔盐法等;微孔-介孔材料的主要制备方法有化学活化法、模板法和水热法等;介孔-介孔材料的制备方法主要有水热法、模板法、溶胶-凝胶法及自组装法等。本文综述了近年来多级孔材料的最新研究进展,分别对大孔-介孔、微孔-介孔及介孔-介孔材料的制备方法进行了介绍,并简要分析了未来本领域研究的发展趋势。     

Viewpoint: From Responsive to Adaptive and Interactive Materials and Materials Systems: A Roadmap

Soft matter systems and materials are moving toward adaptive and interactive behavior, which holds outstanding promise to make the next generation of intelligent soft materials systems inspired from the dynamics and behavior of living systems. But what is an adaptive material? What is an interactive material? How should classical responsiveness or smart materials be delineated? At present, the literature lacks a comprehensive discussion on these topics, which is however of profound importance in order to identify landmark advances, keep a correct and noninflating terminology, and most importantly educate young scientists going into this direction. By comparing different levels of complex behavior in biological systems, this Viewpoint strives to give some definition of the various different materials systems characteristics. In particular, the importance of thinking in the direction of training and learning materials, and metabolic or behavioral materials is highlighted, as well as communication and information-processing systems. This Viewpoint aims to also serve as a switchboard to further connect the important fields of systems chemistry, synthetic biology, supramolecular chemistry and nano- and microfabrication/3D printing with advanced soft materials research. A convergence of these disciplines will be at the heart of empowering future adaptive and interactive materials systems with increasingly complex and emergent life-like behavior.     

雷达吸收剂研究进展

综术字国内外雷达吸收剂的研究进展,较详细地介绍了铁氧体材料,高聚物吸收材料,陶瓷吸收材料,纳米吸收材料,手性材料和智能材料等及吸收剂的吸收机理和最新研究状况。     

纳米纤维素在可降解包装材料中的应用

目的综述纳米纤维素在可降解包装材料中的应用研究。方法总结国内外纳米纤维素在包装领域的最新研究,简述纳米纤维素的制备方法与特性,详细介绍纳米纤维素在生物质薄膜材料、生物质发泡材料、缓释抗菌材料和纸张中的应用研究,以及纳米纤维素功能性材料在包装中的研究进展,并讨论纳米纤维素应用在食品包装中的安全问题。结果纳米纤维素性能优异、绿色环保,作为可降解包装材料的增强成分可以提高复合材料的力学性能和阻隔性能,并可赋予材料特殊的功能。结论纳米纤维素在包装领域有着巨大的应用潜力,利用农作物及其剩余物制备纳米纤维素拥有广阔的发展前景。     

Layered Organic–Inorganic Materials: A Way towards Controllable Magnetism

The search for new materials for tailor‐made applications and new devices involves not only solid‐state chemists, physicists or materials engineers, but also the area molecular and organo‐metallic chemistry, and even biochemistry. This is especially clear in the field of organic–inorganic multifunctional materials, whose design necessitates to investigate new concepts and principles developed in these different disciplines. Here, the authors review the structure‐magnetic property relationships in layered structures, made of organic and inorganic subunits.     

Extremely Rapid Self-Healable and Recyclable Supramolecular Materials through Planetary Ball Milling and Host–Guest Interactions

The host–guest interaction as noncovalent bonds can make polymeric materials tough and flexible based on the reversibility property, which is a promising approach to extend the lifetime of polymeric materials. Supramolecular materials with cyclodextrin and adamantane are prepared by mixing host polymers and guest polymers by planetary ball milling. The toughness of the supramolecular materials prepared by ball milling is approximately 2 to 5 times higher than that of supramolecular materials prepared by casting, which is the conventional method. The materials maintain their mechanical properties during repeated ball milling treatments. They are also applicable as self-healable bulk materials and coatings, and they retain the transparency of the substrate. Moreover, fractured pieces of the materials can be re-adhered within 10 min. Dynamic mechanical analysis, thermal property measurements, small-angle X-ray scattering, and microscopy observations reveal these behaviors in detail. Scars formed on the coating disappear within a few seconds at 60 °C. At the same time, the coating shows scratch resistance due to its good mechanical properties. The ball milling method mixes the host polymer and guest polymer at the nano level to achieve the self-healing and recycling properties.     

Bioinspired Synthesis of Monolithic and Layered Aerogels

Aerogels are the least dense and most porous materials known to man, with potential applications from lightweight superinsulators to smart energy materials. To date their use has been seriously hampered by their synthesis methods, which are laborious and expensive. Taking inspiration from the life cycle of the damselfly, a novel ambient pressure‐drying approach is demonstrated in which instead of employing low‐surface‐tension organic solvents to prevent pore collapse during drying, sodium bicarbonate solution is used to generate pore‐supporting carbon dioxide in situ, significantly reducing energy, time, and cost in aerogel production. The generic applicability of this readily scalable new approach is demonstrated through the production of granules, monoliths, and layered solids with a number of precursor materials.     

材料信息学平台的研究现状发展趋势与作用

调查分析了材料信息学平台研究与应用的现状,指出了材料信息学平台已成为材料研发的最重要的设备之一,展望了新一代材料信息学平台的发展趋势, 概述了材料信息平台对于材料研究与发展的重要促进作用,认为材料信息学平台的应用将加速材料科学与工程的发展,引起材料研究模式的变革.     

隐身材料的研究进展

根据隐身原理，概述了隐身材料的研究现状和发展概况。重点介绍了雷达隐身材料、红外隐身材料、激光隐身材料，以及多波段复合隐身材料现状及研究进展。肯定了目前隐身材料方面取得的一些进展，指出今后隐身材料的发展会向着质轻、带宽、高效、耐久的方向发展，而且多波段兼容的隐身材料也会是未来隐身材料发展的趋势。     

Design Principles for Aqueous Interactive Materials: Lessons from Small Molecules and Stimuli-Responsive Systems

Interactive materials are at the forefront of current materials research with few examples in the literature. Researchers are inspired by nature to develop materials that can modulate and adapt their behavior in accordance with their surroundings. Stimuli-responsive systems have been developed over the past decades which, although often described as “smart,” lack the ability to act autonomously. Nevertheless, these systems attract attention on account of the resultant materials' ability to change their properties in a predicable manner. These materials find application in a plethora of areas including drug delivery, artificial muscles, etc. Stimuli-responsive materials are serving as the precursors for next-generation interactive materials. Interest in these systems has resulted in a library of well-developed chemical motifs; however, there is a fundamental gap between stimuli-responsive and interactive materials. In this perspective, current state-of-the-art stimuli-responsive materials are outlined with a specific emphasis on aqueous macroscopic interactive materials. Compartmentalization, critical for achieving interactivity, relies on hydrophobic, hydrophilic, supramolecular, and ionic interactions, which are commonly present in aqueous systems and enable complex self-assembly processes. Relevant examples of aqueous interactive materials that do exist are given, and design principles to realize the next generation of materials with embedded autonomous function are suggested.