共查询到20条相似文献,搜索用时 203 毫秒
1.
2.
工业级FPGA空间应用器件封装可靠性分析 总被引:1,自引:1,他引:0
分析了工业级和宇航级FPGA(Field Programmable Gate Array)在封装结构上的差别。用Ansysworkbench有限元软件对热循环、随机振动和外力载荷下封装的变形和应力以及焊点的塑性应变进行了仿真。依据剪切塑性应变变化范围预测了焊点热疲劳寿命。结果表明,FCBGA(Flip-Chip Ball Grid Array)封装内部倒装芯片焊点可靠性低于CCGA(Ceramic Column Grid Array)封装,其外部焊点的热疲劳寿命、随机振动等效应力均优于CCGA封装;在外力载荷下,其热疲劳寿命下降速率也明显小于CCGA封装。 相似文献
3.
CBGA组件热变形的2D-Plane42模型有限元分析 总被引:1,自引:0,他引:1
本文介绍有限元中的2D-Plane42模型在CBGA组件热变形中的应用,利用有限元的模拟CBGA组件的应变、应力的分布,通过模拟表明有限元法是研究微电子封装中BGA焊点、CBGA组件的可靠性的方法。 相似文献
4.
CBGA组件热变形的2D-Plane42模型有限元分析 总被引:3,自引:0,他引:3
介绍有限元中的2D-Plane42模型在CBGA组件热变形中的应用,利用有限元的模拟CBGA组件的应变、应力的分布,通过模拟表明有限元法是研究微电子封装中BGA焊点、CBGA组件的可靠性的方法。 相似文献
5.
热循环条件下空洞对PBGA焊点热疲劳寿命的影响 总被引:1,自引:0,他引:1
球栅阵列(ball grid array, BGA)封装器件的广泛应用使空洞对焊点可靠性的影响成为业界关注的焦点之一.采用非线性有限元分析方法和统一型粘塑性本构方程,以PBGA组装焊点为对象,建立了互连焊点热应变损伤的三维有限元模型,并基于修正的Coffin-Manson方程,分析了在热循环加裁条件下不同位置和大小的空洞对焊点疲劳寿命的影响.研究结果显示,位于原应力集中区的空洞将降低焊点疲劳寿命,基于应变失效机理,焊点裂纹易在该类空洞周围萌生和扩展;位于焊球中心和远离原应力集中区的空洞,在一定程度上可提高焊点的疲劳寿命. 相似文献
6.
7.
通过Surface Evolver软件对LGA焊点进行了三维形态预测,利用有限元数值模拟对LGA焊点在热循环条件下寿命进行了分析。研究了热循环条件下LGA焊点的应力应变分布规律,随着焊点远离元件的中心位置焊点所受到的等效应力、等效应变和塑性应变能密度逐渐增大,从而得出处于外面拐角的焊点最先发生失效的结论。基于塑性应变范围和Coffin-Manson公式计算了焊点热疲劳寿命;找出了LGA焊点形态对焊点寿命的影响规律,模板厚度一定时PCB焊盘尺寸小于上焊盘时LGA焊点的热疲劳寿命与PCB焊盘尺寸成正比,大于上焊盘时成反比,大约相等时焊点寿命最大。当PCB焊盘和模板开孔尺寸固定时,通过增大模板厚度来增加焊料体积在一定程度上可提高LGA焊点的热疲劳寿命,但是模板厚度增大到一定值时LGA焊点寿命会逐渐降低。 相似文献
8.
基于陶瓷四边无引线(CQFN)封装结构,采用有限元仿真方法,针对实际外壳建立了三维有限元模型,对焊点在温度循环试验中的应力应变分布开展了研究,重点分析了印刷电路板(PCB)厚度、外壳尺寸大小、引出端形式和温度变动范围等对焊点的影响规律。采用Anand本构模型对铅锡焊点的粘塑性进行了表征,同时利用Coffin-Manson方程对CQFN封装结构在温度循环载荷作用下的热循环疲劳寿命进行了计算。研究表明,适当地增加PCB板厚度、合理地选取外壳外形尺寸及引出端的形式和尽量地降低温度变动范围,可以有效地提高焊点的热疲劳寿命。 相似文献
9.
10.
11.
The article describes a model representation of radar probing data in form of a mixture of background and target samples, which is the sum of two random variables with very different parameters. For model development we research the behavior of the central moments of the distribution mix without assuming the distribution law form. An example it is described the detection of the signal at the output of compression system of chirp ionosonde. 相似文献
12.
13.
解决IP网QoS问题是目前通信领域的研究热点之一.虽然研究已经取得了一定的进展,但人们对于IP 网QoS本身的含义及相关的问题还有着不同的理解.本文将从IP网QoS的定义入手讨论相关的一些问题以及解决IP网QoS问题所做的各种努力. 相似文献
14.
15.
《Proceedings of the IEEE. Institute of Electrical and Electronics Engineers》1968,56(6):1024-1032
Assuming that visual responses are due to the action of particles on the membrane of the visual cells, the stochastic variability of the response should be a function of the number of particles producing it. Quantitative predictions can be made with the aid of a model proposed in previous articles. It is found that responses produced in visual cells of Limulus by absorption of a single photon have the stochastic properties which would be expected if the response to one photon were brought about by 25 particles. It is concluded from this that the processes leading to visual responses produce multiplication of particles. The effects of temperature and of metabolic poisons suggest that these processes are of chemical nature. 相似文献
16.
对影响镍镀层内应力的因素做了介绍和分析,提出了对收缩应力的一种解释,提供了排除这些因素影响的方法,指出重视镀液的管理是减少各种影响内应力因素的主要办法。 相似文献
17.
罗晓羽 《信息技术与标准化》2008,(6):37-39
论述了推进电子行业标准制修订项目计划管理信息化的必要性.并提出了具体措施;详细介绍了电子行业标准制修订项目计划管理数据库的设计思路和实现方法.阐述了对后续工作的几点思考. 相似文献
18.
By means of exact conformal mapping method we have defined character of dependence of squares amounts of angular part of film
element on angled part dimension. We propose relations, approximating obtained dependence. Calculation results and experimental
researches of large-scale models are represented. 相似文献
19.
Moshrefzadeh R.S. Radcliffe M.D. Lee T.C. Mohapatra S.K. 《Lightwave Technology, Journal of》1992,10(4):420-425
The temperature dependence of refractive index of polymer films was determined for a number of slab waveguides by a grating coupling method. This dependence was examined as a function of parameters such as molecular weight and glass transition temperature of the polymer. Temperature-induced changes in N TE-N TM , N being the effective index, were studied systematically for different slab waveguide compositions. It is shown that with proper device design and choice of polymeric materials, thermal effects can be reduced 相似文献
20.
水的光学特性对光学成像质量有着重要的影响,水对光的吸收、散射作用可造成光在水介质传播中的衰减,本文就水的光学特性及其对水下光学成像质量的影响进行了分析,以为成像系统在水下的应用提供基础的理论依据。 相似文献