Comparative pollen and foliar micromorphological studies using light microscopy and scanning electron microscopy of some selected species of Lamiaceae from Alpine Zone of Deosai Plateau,Western Himalayas

The study was conducted to highlight a detailed account of morphology of pollen chosen species of Lamiaceae through scanning electron microscopy, and the anatomical characteristics of leaf epidermis of seven species using simple light microscopy. In results, Anisomeles indica and Otostegia aucheri belong to subfamily Lamioideae because it has tricolpate pollen while the rest eight species belong to subfamily Nepetoideae (hexacolpate pollen). The exine sculpturing of pollen of studied species was found to be reticulate. In the family Lamiaceae, four kinds of stomata were found anomocytic, anisocytic, diacytic, and actinocytic, respectively. The cell wall patterns of epidermal cells were irregular or polygonal with straight or undulate walls. It was noted that the variety of the epidermal trichomes seems of taxonomically important for the identification of species of Lamiaceae. Both nonglandular and glandular trichomes were analyzed. The nonglandular trichomes were characterized with long, thin, and pointed apical unicellular cells. The nonglandular trichomes were A‐shaped in Thymus linearis. In Perovskia abrotanoides, stellate glandular trichomes were observed whereas in A. indica and Mentha royleana both glandular and nonglandular trichomes were found. In A. indica, the nonglandular trichomes were sessile and peltate in M. royleana. For the first time in this study, pollen and foliar micromorphological features of selected species of this area are carried out. These taxonomic characters were found to be important in discrimination of species from each other. In future, the detailed study with comprehensive morphology coupled with other important characters is required for delimitation of taxa at various levels.     

Taxonomic study of subfamily Nepetoideae (Lamiaceae) by polynomorphological approach

The present study is insight into pollen morphology for characterizing species and their utility in the taxonomic separation of certain taxa of subfamily Nepetoideae (Lamiaceae) from Pakistan. The pollen micromorphology of 11 species of the Nepetoideae was analyzed and documented using light microscopy and scanning electron microscopy (SEM) for both qualitative and quantitative characteristics. Most species have hexazonocolpate pollen grains but trizonocolpate and tetrazonocolpate pollen with circular and oval amb were also rarely observed in Mentha spicata. The basic pollen shape in most of the studied species was subspheroidal but prolate grains were also observed in M. spicata, S. coccinea, and S. plebeia. The exine sculpturing of Nepetoideae pollen was taxonomically very informative particularly at subfamily level. Observations of exine sculpturing with SEM revealed various types of pollen grains: reticulate, bireticulate, microreticulate, perforate, aerolate, and gammate. The bireticulate type further subdivided into three subtypes based on the number of secondary lumina in each primary lumen and is characterized by varying characteristics of the secondary reticulum and primary muri. A significant variation was observed in colpus surface ornamentation. The maximum polar diameter was found in O. americanum (58 ± 5.8 μm) and the maximum equatorial diameter observed in O. basilicum (50.25 ± 1.37 μm). Pollen features of the studied species were discussed and compared based on the current taxonomical concepts. The results showed that pollen traits of the subfamily Nepetoideae was found significant to classify the taxa. Furthermore, pollen features provide additional evidence to distinguish macromorphologically similar taxa from each other.     

Foliar epidermal anatomy of Lamiaceae with special emphasis on their trichomes diversity using scanning electron microscopy

Foliar epidermal features were based on the micromorphology of trichomes types, epidermal cells and stomatal complex. Even though each feature has its own limited taxonomic value but collectively these characteristics may be systematically important especially for the discrimination and identification of complex and problematic taxa. The systematics significance of nonglandular (NGTs) and glandular trichomes (GTs), stomatal complex and epidermal cells of Lamiaceous flora were analyzed by using the light microscopy (LM) and scanning electron microscopy (SEM). Variations on the observed epidermal appendages were divided into two basic types: glandular and nonglandular. GTs can be divided into subtypes: sessile capitate, subsessile capitate, and barrel and sunken. NGTs were also divided into subtypes: dendritic, stellate, conical, falcate, simple and 1–6 cells long having granulate and smooth surface ornamentation. NGTs were the most dominant features of both adaxial and abaxial surfaces of all observed taxa. Vitex negundo, Isodon rugosus, Colebrookea oppositifolia, and Marrubium vulgare could be demarked because of their twisted like appearance of NGTs at the abaxial surface. The Lamiaceae had both hypostomatic and amphistomatic leaf. Stomata were observed as diacytic, anisocytic, and anomocytic. Epidermal cells were found to be irregular, isodiametric, and rectangular. Based on these characters a taxonomic key was developed to delimit the closely related taxa. Distribution and morphology of the foliar epidermal trichomes through SEM highlight an important taxonomic tool used by the taxonomists as an aid to the correct identification of problematic Lamiaceae taxa.     

Implication of palynological techniques for the authentication of adulterated drugs traded with the same name in different herbal markets of district Lahore,Pakistan

Adulteration in traded medicinal plants is a significant issue nowadays and use of these adulterated medicinal plants can impose harmful impact to end user. However, this problem can be overcome by ensuring the identification of traded medicinal plants which are used in making different herbal medicines. In this regard, palynological markers are considered to be an important taxonomic tool in the identification of original medicinal plant from its adulterant. Hence this study attempted to provide particular reliable palynological markers for distinguishing selected medicinal plants from their adulterants, that is, Cinnamomum verum versus Canella winterana, Cinnamomum tamala versus Cinnamomum obtusifolium, Gymnema sylvestre versus Gymnema lactiferum, Artemisia maritima versus Artemisia absinthium, Achillea millefolium versus Adhatoda vasaka, Sphaeranthus indicus versus Sphaeranthus africanus, Averrhoa carambola versus Butea monosperma, and Morus nigra versus Morus alba. Results demonstrated great variations in multiple palynological characters between original medicinal plant and its adulterant such as in pollen size, shape, colpi length, exine, intine thickness, and fertility. In equatorial view, circular to spheroidal shape of pollen was found in A. millefolium while oblate shape was observed in A. vasaka. Similarly B. monosperma pollen was 34 μm, whereas pollen of its adulterant A. carambola was 21 μm. Moreover, colpi length of A. maritima was 11.8 μm, whereas 4.5 μm in A. absinthium. Hence it can be concluded that palynological characters are commendably helpful in identification of genuine medicinal plant from its adulterant.     

Microscopic investigation of pollen morphology of Brassicaceae from Central Punjab‐Pakistan

The intention of the current study is to provide an account on the palynological features of Brassicaceae from Central Punjab‐Pakistan as a basis for future studies. Different morpho‐palynological characteristics both qualitative and quantitative were analyzed during this research which includes shape of pollen, diameter of pollen, P/E ratio, exine sculpturing, thickness of exine, type of pollen, shape and size of lumens, and thickness of murus. Taxonomic keys were also constructed based on pollen morphological characters for correct identification of species. This study aims to provide detailed information of pollen diversity and their exine structure based on both qualitative and quantitative characters by using Light microscopy and Scanning electron microscopy. Shape of pollen is mostly prolate, but some species also have sub‐prolate to spheroidal prolate types. Exine ornamentation in most species was reticulate, whereas micro reticulate (one species) and coarsely reticulate (one species) exine also observed in some pollen. All the pollen mentioned in this study have tricolpate apertures. Variation found in thickness of exine and other characters proved to be helpful at generic and specific level. The results reinforced the significance of pollen morphological features of family Brassicaceae and aid for valuable taxonomic tool in plant systematics.     

Pollen morphology and its taxonomic potential in some selected taxa of Caesalpiniaceae observed under light microscopy and scanning electron microscopy

Pollen micromorphology is not only used to check the functional and structural evolution in plants but also to solve the taxonomic problem related to the classification of plants. Therefore, keeping in view the significance of pollen traits, selected taxa of the subfamily Caesalpiniaceae was collected from different geographical regions of Pakistan. The species were then analyzed under both light microscopy and scanning electron microscopy techniques to investigate the importance of micromorphological characters of pollen in the identification and classification of species. Great variation was recorded in equatorial shape, surface ornamentation, tectum, polar diameter, equatorial diameter, and exine thickness. However, little variation was observed in pollen type, polar shape, and fertility of pollen. The equatorial shape of five types was observed: prolate, prolate-spheroidal, spheroidal-subprolate, subspheroidal-prolate, and subspheroidal. Four types of surface ornamentation, psilate, granulate, clavate, and perforate, were recorded. Tectum of five types, intactate, reticulate regulate, medium reticulate, tactate, and striate, was observed. Sexine was thicker than nexine in all studied species. The largest polar diameter was observed in Caesalpinia pulcherrima 64.1 μm while the smallest in Parkinsonia aculeata 26.1 μm. The largest equatorial diameter was found in C. pulcherrima of 70.25 μm whereas the smallest in P. aculeata 27.57 μm. All the pollens analyzed were tricolporate. All studied species have a fertility ratio of more than 90%. A taxonomic key was developed to show the variation in pollen features and delimit species for the correct identification. In conclusion, the pollen traits were found useful to define species boundaries at various taxonomic ranks and will strengthen the taxonomy of this subfamily. Besides, this study also explored the palynological traits and their implication in the taxonomy of the subfamily Caesalpiniaceae.     

Palynological characteristics of some selected species of family Cucurbitaceae (Juss.) using light and scanning electron microscopy techniques

The pollen morphology of 11 species distributed in seven genera belonging to family Cucurbitaceae has been studied using light microscopy (LM) as well as scanning electron microscopy. Pollen morphology of this family is diverse and is almost europalynous. Nearly all types of pollen belonging to different size class and shape class with a variety of exine sculpturing are found in the family. Pollen grains are usually triporate to tricolporate, prolate, oblate‐spheroidal, spheroidal, to suboblate, radially symmetrical, and isopolar. The common exine pattern is reticulate of various forms ranging from finely reticulate to coarsely reticulate with some species having echinate type of exine ornamentation, for example, Cucurbita pepo and Praecitrullus fistulosus. Most of the studied species are somewhat triangular with respect to equatorial outlook and circular to elliptic in polar outlook. The palynological characteristics of the members of the family are useful in identification of taxa at generic level mostly. Based on the present study it is not recommended to wholly solely depend upon the pollen morphology for the identification of taxa especially at specific levels because very minor differences regarding pollen characters exist among the species of the same genera.     

Microscopic investigation of palyno‐morphological features of melliferous flora of Lakki Marwat district,Khyber Pakhtunkhwa,Pakistan

The present study was carried out to investigate the polliniferous bee flora of Lakki Marwat district, Khyber Pakhtunkhwa, Pakistan. A total of 18 species, belonging to 13 different families were identified for the foraging activities of honeybees, namely, Cenchrus biflorus, Cestrum nocturnum, Citrus limon, Combretum indicum, Datura innoxia, Duranta erecta, Hamelia patens, Helianthus annuus, Ipomoea cairica, Luffa aegyptiaca, Nerium oleander, Ocimum basilicum, Parthenium hysterophorus, Pennisetum typhoides, Prosopis cineraria, Prosopis juliflora, Saccharum spontaneum, and Ziziphus jujuba. The identified melliferous flora was collected for the morpho‐palynological investigation. Pollen were acetolyzed, measured, and described qualitatively using light microscopy. The pollen types varied from psilate to echinate and colpi from tricolpate to hexacolpate. Quantitative characteristics including polar diameter, equatorial diameter, polar to equatorial ratio, colpi length, colpi width, spine length, spine width, and exine thickness of the pollen were determined and analyzed statistically using software IBM SPSS Statistics 20. The results of the present study highlighted the significance of pollen morphology of the bee flora of the area which may lead to the identification of the potential and useful botanical sources for beekeepers and to check the honey quality marketed from the study area.     

Pollen morphology of the genus Sophora (Fabaceae) and its taxonomic implications

The genus Sophora (Fabaceae) is one of the taxonomically challenging genera with high economic and medical values. In this study, the pollen morphology of 43 samples of 27 species, 4 subspecies, and 4 varieties of the genus Sophora and 3 closely related genera was examined using scanning electron microscopy to evaluate the pollen diversity of the genus and its taxonomic significance. Pollen grains of the studied species were tricolporate (rarely six-aperture), and pollen shape varied from suboblate, spheroidal, subprolate to prolate. Echinate external ornamentation was reported for the first time in some species of the genus. Aperture membrane ornamentation and outline in a polar/equatorial view were described for the first time in the genus. Principal component analysis was used to understand the relationship and discrimination between the species and the genera, with six components accounting for 79.92% of the total variance. Taxonomic keys based on pollen morphology were also constructed to easily identify the taxa of the genus through palynological characteristics. Results showed that pollen morphology alone is not sufficient to elucidate or reconstruct taxonomic relationships within the genus Sophora, but palynological assessments can provide some useful information for identifying taxonomically problematic taxa.     

Scanning electron microscopic imaging of palynological metaphors: A case study of family Poaceae taxa

This study highlighted the taxonomic utilization of palynological metaphors for selected members (53) of family Poaceae. Multiple microscopic technique light and scanning electrons had been employed for detailed analysis. Results reported monad pollen type in all studied 53 members, which showed its limited taxonomic value up to family level. In relation to shape of pollen both polar and equatorial views strikingly differed from each other. Like semi angular pollen observed in Dactyloctenium aegyptium (L.) Wild. whereas round-minutely irregular pollen in Lolium temulentum L. Polar and equatorial diameter also showed variation, that is, Desmostachya bipinnata (L.) Stapf. can be differentiated from Sorghum bicolor (L.) Moench on diameter variation basis. A pore characteristic does not show much qualitative variation; however pore sizes differ species to species. The most frequently scarbate sculpturing was observed in 28 species followed by verrucate. Hence it can be said that pollen shape, polar, and equatorial diameters, pore size, P/E ratio, pore sculpturing are of good taxonomic value and holds a significant position in identification and delimitation of Poaceae taxa.     

Micro‐morphological,environmental and phytochemical investigation of herbal medicines by using LM and SEM: A quality control tool

The use of quality control tool for authentication of Jadwar (Delphinium denudatum Wall. ex Hook.f. & Thomson), a folk herbal drug used for the treatment of different ailments, was studied. People face problems of adulteration for this drug at global, regional, national and local levels. Two different plant species are commercially marketed in the Indo‐Pak Subcontinent under the same trade name of Jadwar. One is D. denudatum Wall. ex Hook.f. & Thomson and the other is Aconitum heterophyllum Wall. ex Royle. To focus on this problem, a marketable available drug sample of Jadwar was authenticated by using basic microscopy tools (LM) and advanced chemo‐taxonomic markers. Authentication, quality and standardization of this drug was achieved using morphology, organoleptography, UV and IR analyses, scanning electron microscopy of pollen and anatomical investigations. The techniques used for authentication marked the clear difference between the studied plants. Microscopic studies, chemotaxonomic investigation and other techniques used in this project provided the basis for the authentication of this species.     

Pollen morphological investigations of family Cactaceae and its taxonomic implication by light microscopy and scanning electron microscopy

The family Cactaceae is the diversified group of angiosperm plants whose pollen statistics has been used for taxonomic identification. In this article, we present the pollen morphology of eight species belong to seven taxonomically complex genera of Cactaceae including Astrophytum, Cylindropuntia, Echinocereus, Echinopsis, Mammillaria, Opuntia, and Thelocactus using light and scanning electron microscopy. The pollen grains were acetolyzed, measured, described, and electron photomicrographs were taken. Cactaceae can be characterized by presenting different palynomorphological features including pollen type, sculpturing, polar and equatorial diameter, aperture orientation, exine thickness, P/E ratio, and echini features. Four types of pollen shapes, that is, prolate spheroidal (three species), subprolate (two species), prolate (two species), and oblate spheroidal in Echinocereus reichenbachii were observed. The polar and equatorial diameter observed maximum in O. ficus indica 116.95 and 112.27 μm while minimum in M. compressa 38.42 and 21.05 μm. Pollen of two types, tricolpate in members of subfamily Cactioideae and pantoporate in the Opuntioideae were examined. The fertility percentage has been observed maximum in Opuntia macrocentra (83.84%) and minimum in Opuntia ficus‐indica (57.89%). Exine sculpturing showing great variations such as granulate, reticulate, granulate perforate and micro‐echinate foveolate ornamentation was examined only in Echinopsis eyriesii. A key to species, based on pollen micromorphological attributes, has been constructed for correct identification of complex cactus species.     

Taxonomic significance of foliar epidermal morphology in Lamiaceae from Pakistan

Foliar micromorphological features are useful to elucidate the taxonomy and systematics of the Lamiaceae species. Leaf epidermal morphology using scanning electron microscopy and light microscopy of 22 Lamiaceae species from 15 genera have been investigated with an aim to solve its taxonomic problem in the correct identification. Various foliar micromorphological features were observed to explain their importance in resolving the correct identification of Lamiaceae taxa. Two main types of trichomes were observed; glandular trichomes (GTs) and nonglandular trichomes (NGTs). GTs were further divided into seven subtypes including the capitate, subsessile capitate, sessile capitate, sunken, barrel, peltate, and clavate. Similarly, NGTs were also divided into simple unicellular and multicellular including conical, falcate, cylindrical, dendrite, papillose, and short hook shape. Quantitative measurement includes the length and width of the trichomes, stomatal complex, epidermal cells, stomata, and trichomes index. Based on the foliar micromorphological characters, a taxonomic key was developed to delimit and correctly identify studied taxa. Further molecular, other anatomical and phylogenetic studies are recommended to strengthen the systematics of Lamiaceae.     

Pollen diversity and its implications to the systematics of mimosaceous species by LM and SEM

In this study we have discussed pollen morphology of 14 mimosaceous species belonging to five genera by using light microscopy (LM) and scanning electron microscopy (SEM). The palynological features of species were determined by both qualitative and quantitative characters. The qualitative characters include pollen shape, colpi arrangement, and exine sculpturing. Oblate spheroidal shaped pollens were noted in Albizia procera, Albizia lebbeck, Acacia tortilis, Acacia ampliceps, and Acacia modesta, subprolate shaped pollen in Leucaena leucocephala, Prosopis julifera, and Acacia nilotica, prolate pollen in Acacia farnesiana and Prosopis glandulosa while spheroidal, sub spheroidal and sub oblate pollen grains were observed in Acacia catechu, Mimosa himalayana, Prosopis cineraria, respectively. Sparsely foveolate, reticulate, scabrate, and scrobiclate exine sculpturing were observed. Colpi with sunken ornamentation were seen in P. cineraria, P. glandulosa, P. juliflora, and L. leucocephala while colpi were absent in rest of the studied species. The quantitative characters were statistically studied using SPSS software. The current study gives important morpho‐palynological characters for identifying and validation of close related and similar taxa which will aid to the phylogenetic analysis of Mimosaceae family.     

Pollen morphology and its implication in the taxonomy of some selected taxa of the bi and tri-ovulate Euphorbiaceae of the Hainan Island by using multiple microscopic techniques

The family Euphorbiaceae is one of the most taxonomically complex and diverse family among the angiosperm. Therefore, this study aims to document the pollen morphology of the Euphorbiaceae taxa collected from different geographical regions of the Hainan Island South China, to strengthen the taxonomy and support the subfamilial classification. The Euphorbiaceae includes 23 species and 10 genera of the bi-ovulate subfamily Phyllanthoideae and tri-ovulate Crotonoideae, Euphorbioideae, and Acalyphoideae were examined under light and scanning electron microscopy. The principal component analysis was performed by using six variables to show variation and relationships between the species. A significant variation was found in the pollen morphology (exine and colpus sculpturing). The croton-type pattern of the pollen was found the diagnostic trait of the Crotonoideae. The Euhphorboideae taxa were mostly homogenous however, variation was found in the muri pattern. The Acalyphoideae, have fossulate scabrate and verrucate exine sculpturing that can delimit from the rest of sub-families. The Phyllanthoideae, showed reticulate exine, tri to tetra-colporate having various colpus morphology. The maximum pollen size was found in Croton hirtus (59.49 × 60.86 μm) and minimum in Acalypha indica (10.86 × 73 μm). Similarly, the maximum colpus width was observed in Euphorbia pulcherrima (8.3 μm). Hence pollen traits have relevance in the taxonomy and phylogenetic of the family to define species boundaries at various taxonomic levels. This study can support and strengthen the taxonomy of subfamilies and fill the palynological gap of these taxa in Hainan Island and will contribute to future systematic studies of the Euphorbiaceae.     

Light microscopy and scanning electron microscopy: Implications for authentication of misidentified herbal drugs

Plant‐based drugs have reached remarkable acceptability as therapeutic remedy for various diseases due to the adverse effects of contemporary medicines. This increasing popularity of herbal drugs leads to a growing herbal market for the development of plant‐based drugs, nutraceuticals, pharmaceuticals and cosmeceuticals. Herbal drug adulteration is a complex problem which currently has undeniable consequences on health and nutrition. Ambiguities in nomenclature, misidentification and resemblance of colour and texture of the crude herbal drugs are the major causes of adulteration. Three different species commercially marketed under the same trade name Halion are Lepidium apetalum, Asparagus officinalis, and Lepidium didymum. The genuine source of Halion is Lepidium apetalum, which is authenticated by using basic and advanced taxonomic techniques. Morphology, anatomy and palynology of the misidentified sources were done using light and scanning electron microscopic techniques for authentication. This study may help to set microscopic techniques as a tool to achieve quality and standardization of the genuine source of the herbal drug. Phytochemical analysis and biological screening is needed for the further establishment of authenticity and quality of herbal drugs.     

Quality assurance and authentication of herbal drug (Argyrolobium roseum and Viola stocksii) through comparative light and scanning electron microscopy

The quality assurance and authentication of crude herbal drugs play important role in the effective therapeutic effect of herbal drug and their products. There are many reported problems in quality assurance of herbal crude drugs concerning to their correct identification. The present study was designed with the aim to document the authentication and quality assurance of the herbal crude drugs (Argyrolobium roseum and Viola stocksii) thorough light microscopy (LM) and scanning electron microscopy (SEM). The detailed foliar anatomical studies showed polygonal epidermal cells having anticlinal walls in Argyrolobium roseum while rounded epidermal cells were observed in Viola stocksii. The anomocytic stomata type was observed in Argrolobium roseum while actinocytic was noticed in Viola stocksii. The pollen of studied species appeared as tricolporate showing reticulate exine sculpturing in Argrolobium roseum while fine perforations were recorded in Viola stocksii. Furthermore, quantitative analysis of phenols, flavonoids, and antioxidant activity showed high flavonoid and phenol content in Argyrolobium roseum as compared with Viola stocksii. It was observed that Argyrolobium roseum was discriminated from the Viola stocksii based on the leaf and pollen micromorphological traits by using LM and SEM techniques. It was concluded that LM and SEM techniques were found useful for the quality assurance of botanicals and their authentication.     

Authentication of the 31 species of toxic and potent Chinese Materia Medica by light microscopy,part 3: Two species of T/PCMM from flowers and their common adulterants

Toxic and potent Chinese Materia Medica (T/PCMM) has become a hot and sensitive topic as more and more people around the world are interested in the safety of herbal medicines. T/PCMM is irreplaceable in treating some diseases; but it can easily cause serious problems if confused with other herbal medicines. Accurate identification is essential to ensure their safe use, but up to now, the literature on the authentication of T/PCMM is scant. Thus, we are undertaking a study of 31 T/PCMM originating from plants, animals, minerals, and secreta. Our previous study established microscopic observation as a simple, fast, accurate, and convenient method for identifying and authenticating animal and seed T/PCMM. This study focused on the authentication of flower T/PCMM as a part of the whole study. The flower T/PCMM studies were derived from two species, Datura metel L. (Flos Daturae) and Rhododendron molle G. Don (Flos Rhododendri Mollis). Other species easily confused with these two were also examined and characterized. Using the microscope camera, normal light and polarized light microscopy, we determined the macroscopic and microscopic features of the flowers; in addition, the oil immersion lens was used to study the pollen grain characteristics. The results demonstrated that flower T/PCMM can be identified and authenticated using a light microscope equipped with an oil immersion lens. This same equipment can be easily used to characterize other herbal flower medicines. Microsc. Res. Tech., 2009. © 2009 Wiley-Liss, Inc.     

Pollen morphological variation of Berberis L. from Pakistan and its systematic importance

Due to overlapping and diverse morphological characters, Berberis is among the most taxonomically complex genera. Palynology is one of the taxonomic tools for delimitation and identification of complex species. In this study, pollens of 10 Berberis species were analyzed through light and scanning electron microscopy. Qualitative as well as quantitative features (pollen shape, size, presence or absence of colpi, colpi length and width, exine thickness, ornamentation, pollen class, aperture, and polar–equatorial ratio) were measured. Five species were observed to have colpate (pantocolpate) with elongated ends, radially symmetrical, isopolar, monads, and psilate‐regulate pollens. In polar view, six pollen were spheroidal, two were ovoid, one spherical, and one oblate. Similarly, variation in pollen length was prominent and the largest pollen on polar view was recorded for B. psodoumbellata 60–65 μm (62.4 ± 0.9), while the smallest one was observed for B. lycium 29–35 μm (32.2 ± 1). The observed variation in both quantitative and qualitative features were important in taxonomic identification. This shows that palynological characters are helpful in identification of Berberis genus at the species level.     

Palyno‐anatomical studies of monocot taxa and its taxonomic implications using light and scanning electron microscopy

Palyno‐anatomical study of monocots taxa using Light and Scanning Electron Microscopy (SEM) was first time conducted with a view to evaluating their taxonomic significance. Studied plants were collected from different eco‐climatic zones of Pakistan ranges from tropical, sub‐tropical, and moist habitats. The aim of this study is to use palyno‐anatomical features for the correct identification, systematic comparison, and investigation to elucidate the taxonomic significance of these features, which are useful to taxonomists for identifying monocot taxa. A signification variation was observed in quantitative and qualitative characters by using the standard protocol of light microscopy (LM) and SEM. Epidermal cell length varied from maximum in Allium griffthianum (480 ± 35.9) μm at the adaxial surface to minimum in Canna indica (33.6 ± 8.53) μm on abaxial surface. Maximum exine thickness was observed in Canna indica (4.46) μm and minimum in Allium grifthianum (0.8) μm. Variation was observed in shape and exine ornamentation of the pollen, shape of the epidermal cell, number, size, and type of stomata, guard cell shape, and anticlinal wall pattern. Based on these palyno‐anatomical features a taxonomic key was developed, which help in the discrimination of studied taxa. In conclusion, LM and SEM pollen and epidermal morphology is explanatory, significant, and can be of special interest for the plant taxonomist in the correct identification of monocots taxa.