Palyno‐morphological investigations of subtropical endangered flora of Capparidaceae through light and scanning electron microscopy

The research was performed to investigate pollen morphology of endangered species of Capparidaceae in subtropical regions of Pakistan. The distinguishing characters were investigated by using light microscope and scanning electron microscope. Palynological study is comprised of pollen shape, pollen type, exine sculpturing, polar and equatorial diameter, length and width of colpi, mesocolpium, and exine thickness. In polar view, Cleome viscosa exhibited the highest pollen size 26.4 (32.7–24.5 μm) ±0.776 whereas Capparis spinosa appeared to be the lowest 12.6 (14.5?10.7 μm) ±0.400. In equatorial view, Cleome viscosa had the largest pollen size 17.1 (20.0–15.0 μm) ±0.606 and Capparis spinosa had the smallest pollen size 9.7 (12.50–8.00 μm) ±0.394. The maximum fertility percentage has been observed in Capparis spinosa, that is, 98.96% and minimum in Cleome viscosa, that is, 82.93%. Diagnostic key has been constructed to state the essential diagnostic features by means of which the taxa can be identified. Remarkable variations have been observed in pollen size, shape, and exine sculpturing. All the selected species were tricolporate. Prolate to subprolate pollen were observed. There is a great variation existed in exine sculpturing such as in Capparis decidua and C. sp. nova sculpturing is reticulate, in Capparis himalayensis sculpturing is Scabrate granulate, in Capparis spinosa sculpturing is Psilate, in Cleome viscosa sculpturing is regulate‐reticulate, in Dipterygium glaucum sculpturing is regulate and in Gynandropsis gynandra sculpturing is striate‐regulate. On the basis of overall characteristics of pollen it seems that palynology of this family is helpful at the generic and specific level.     

Comparative foliar anatomical and pollen morphological studies of Acanthaceae using light microscope and scanning electron microscope for effective microteaching in community

In this study, foliar anatomy and pollen morphology of 10 species of Acanthaceae has been investigated using light and scanning electron microscopy. The study was aimed to highlight the role of microscopy in microteaching at community for proper characterization of plants using palyno‐anatomical characters including pollen type, exine sculpturing, shape of epidermal cells, pattern of anticlinal wall, type and size of stomata, and trichome. Most of the species have polygonal cell shapes but some species have irregular, tetragonal, and pentagonal shape of epidermal cells. The largest epidermal cell length on adaxial and abaxial surface were observed in Asystasia gangetica 66.95 and 87.40 μm whereas least was observed on adaxial surface in Justicia adhatoda 36.9 μm and on abaxial surface in Barleria cristata 35.65 μm. In anatomy, species have diacytic type of stomata, whereas stomata of paracytic type observed in two species, while in A. gangetica cyclocytic type of stomata are present. Quantitively on abaxial surface, largest stomata length 29.9 μm and width 24.30 μm was noted in B. cristata. While shortest stomata length was observed in Ruellia prostrata 25.95 μm whereas minimum width of stomata was examined in Barleria acanthoides 2.05 μm. The diversity of trichomes are present in all species except in Ruellia brittoniana. Acanthaceae can be characterized by exhibiting different pollen morphology having five types of pollen shapes, prolate, spheroidal, perprolate, subprolate, and oblate spheroidal. Exine peculiarities showing variations such as reticulate, granulate, coarsely reticulate, lophoreticulate, perforate tectate, and granulate surface were examined.     

Palyno-morphological attributes of some selected plant species of family Asteraceae from district Dera Ismail Khan,KPK, Pakistan

The current study aimed to investigate the palyno-morphological features of Asteraceous species from District Dera Ismail Khan, Khyber Pakhtunkhwa, Pakistan. A total of 13 species were collected, pressed, identified, and examined by using light and scanning electron microscopy. Both qualitative and quantitative pollen characters were observed, that is, equatorial and polar diameter, number of pores and colpi, exine thickness, exine sculpturing, pollen shape, and P/E ratio. Pollen shapes observed in studied taxa were spheroidal, suboblate, oblate-spheroidal, and lophate-spheroidal. The aperturation patterns of pollens vary from tricolporate to tetracolporate. The maximum polar and equatorial diameter of 75–100 (87.5 ± 13.6) μm and 87.5–117.5 (102.5 ± 16.4) μm, respectively, was recorded in Echinops echinatus, while minimum polar and equatorial diameter of 20–22.5 (21 ± 1.36) μm and 22.5–25 (23.5 ± 1.36) μm, respectively, was recorded in Aster subulatus. Six types of exine sculpturing patterns were observed; echinate, micro-echinate, echinate-microreticulate, microreticulate, echinate-perforate, and scabrate. Maximum exine thickness of 8.75 μm was recorded in E. echinatus and minimum of 1.25 μm in Launaea mucronata. The pollen morphology has valuable significance in understanding the taxonomy of different plant groups and plays a central role in the correct identification and classification of Asteraceous flora at species, generic, and tribe levels.     

Pollen morphology and its taxonomic potential in some selected taxa of Caesalpiniaceae observed under light microscopy and scanning electron microscopy

Pollen micromorphology is not only used to check the functional and structural evolution in plants but also to solve the taxonomic problem related to the classification of plants. Therefore, keeping in view the significance of pollen traits, selected taxa of the subfamily Caesalpiniaceae was collected from different geographical regions of Pakistan. The species were then analyzed under both light microscopy and scanning electron microscopy techniques to investigate the importance of micromorphological characters of pollen in the identification and classification of species. Great variation was recorded in equatorial shape, surface ornamentation, tectum, polar diameter, equatorial diameter, and exine thickness. However, little variation was observed in pollen type, polar shape, and fertility of pollen. The equatorial shape of five types was observed: prolate, prolate-spheroidal, spheroidal-subprolate, subspheroidal-prolate, and subspheroidal. Four types of surface ornamentation, psilate, granulate, clavate, and perforate, were recorded. Tectum of five types, intactate, reticulate regulate, medium reticulate, tactate, and striate, was observed. Sexine was thicker than nexine in all studied species. The largest polar diameter was observed in Caesalpinia pulcherrima 64.1 μm while the smallest in Parkinsonia aculeata 26.1 μm. The largest equatorial diameter was found in C. pulcherrima of 70.25 μm whereas the smallest in P. aculeata 27.57 μm. All the pollens analyzed were tricolporate. All studied species have a fertility ratio of more than 90%. A taxonomic key was developed to show the variation in pollen features and delimit species for the correct identification. In conclusion, the pollen traits were found useful to define species boundaries at various taxonomic ranks and will strengthen the taxonomy of this subfamily. Besides, this study also explored the palynological traits and their implication in the taxonomy of the subfamily Caesalpiniaceae.     

Pollen micromorphological analysis of tribe Acacieae (Mimosaceae) with LM and SEM techniques

The morphology of pollen grains of the 06 species of tribe Acacieae (Mimosaceae) belonging to one genus were investigated using scanning electron microscopic (SEM) and light microscopic (LM) approach. Lactic acid acetolysis method was used for (LM) while non‐acetolysis for (SEM). The species were examined for the both qualitative and quantitative palynological features. Qualitatively the pollen was studied for the shape, exine sculpturing, pollen shape, and pollen type. Oblate spheroidal shape of pollen was observed in Accacia modesta. Subprolate shape in Accaca nilotica. In Accacia farnesiana, prolate pollen was examined while prolate spheroidal in Acacia tortilis and spheroidal pollen grains were studied in Acacia catechu, respectively. Pollen exine sculpturing of the studied tribe possesses novel variation. Foveolate, reticulate, foveolate‐psilate, faint reticulate, fossulate, perforate, and scrabate exine sculpturing were noticed. Colpi were absent in all species. Excessive variation was observed in both qualitative and quantitative character of pollen. SPSS software was use for the quantitative measurement of the pollen grains. The current study will be helpful for the identification of the problematic species and phylogenetic studies of family Mimosaceae.     

Palynological characteristics of some selected species of family Cucurbitaceae (Juss.) using light and scanning electron microscopy techniques

The pollen morphology of 11 species distributed in seven genera belonging to family Cucurbitaceae has been studied using light microscopy (LM) as well as scanning electron microscopy. Pollen morphology of this family is diverse and is almost europalynous. Nearly all types of pollen belonging to different size class and shape class with a variety of exine sculpturing are found in the family. Pollen grains are usually triporate to tricolporate, prolate, oblate‐spheroidal, spheroidal, to suboblate, radially symmetrical, and isopolar. The common exine pattern is reticulate of various forms ranging from finely reticulate to coarsely reticulate with some species having echinate type of exine ornamentation, for example, Cucurbita pepo and Praecitrullus fistulosus. Most of the studied species are somewhat triangular with respect to equatorial outlook and circular to elliptic in polar outlook. The palynological characteristics of the members of the family are useful in identification of taxa at generic level mostly. Based on the present study it is not recommended to wholly solely depend upon the pollen morphology for the identification of taxa especially at specific levels because very minor differences regarding pollen characters exist among the species of the same genera.     

Taxonomic study of subfamily Nepetoideae (Lamiaceae) by polynomorphological approach

The present study is insight into pollen morphology for characterizing species and their utility in the taxonomic separation of certain taxa of subfamily Nepetoideae (Lamiaceae) from Pakistan. The pollen micromorphology of 11 species of the Nepetoideae was analyzed and documented using light microscopy and scanning electron microscopy (SEM) for both qualitative and quantitative characteristics. Most species have hexazonocolpate pollen grains but trizonocolpate and tetrazonocolpate pollen with circular and oval amb were also rarely observed in Mentha spicata. The basic pollen shape in most of the studied species was subspheroidal but prolate grains were also observed in M. spicata, S. coccinea, and S. plebeia. The exine sculpturing of Nepetoideae pollen was taxonomically very informative particularly at subfamily level. Observations of exine sculpturing with SEM revealed various types of pollen grains: reticulate, bireticulate, microreticulate, perforate, aerolate, and gammate. The bireticulate type further subdivided into three subtypes based on the number of secondary lumina in each primary lumen and is characterized by varying characteristics of the secondary reticulum and primary muri. A significant variation was observed in colpus surface ornamentation. The maximum polar diameter was found in O. americanum (58 ± 5.8 μm) and the maximum equatorial diameter observed in O. basilicum (50.25 ± 1.37 μm). Pollen features of the studied species were discussed and compared based on the current taxonomical concepts. The results showed that pollen traits of the subfamily Nepetoideae was found significant to classify the taxa. Furthermore, pollen features provide additional evidence to distinguish macromorphologically similar taxa from each other.     

Pollen diversity and its implications to the systematics of mimosaceous species by LM and SEM

In this study we have discussed pollen morphology of 14 mimosaceous species belonging to five genera by using light microscopy (LM) and scanning electron microscopy (SEM). The palynological features of species were determined by both qualitative and quantitative characters. The qualitative characters include pollen shape, colpi arrangement, and exine sculpturing. Oblate spheroidal shaped pollens were noted in Albizia procera, Albizia lebbeck, Acacia tortilis, Acacia ampliceps, and Acacia modesta, subprolate shaped pollen in Leucaena leucocephala, Prosopis julifera, and Acacia nilotica, prolate pollen in Acacia farnesiana and Prosopis glandulosa while spheroidal, sub spheroidal and sub oblate pollen grains were observed in Acacia catechu, Mimosa himalayana, Prosopis cineraria, respectively. Sparsely foveolate, reticulate, scabrate, and scrobiclate exine sculpturing were observed. Colpi with sunken ornamentation were seen in P. cineraria, P. glandulosa, P. juliflora, and L. leucocephala while colpi were absent in rest of the studied species. The quantitative characters were statistically studied using SPSS software. The current study gives important morpho‐palynological characters for identifying and validation of close related and similar taxa which will aid to the phylogenetic analysis of Mimosaceae family.     

Scanning electron microscopic imaging of palynological metaphors: A case study of family Poaceae taxa

This study highlighted the taxonomic utilization of palynological metaphors for selected members (53) of family Poaceae. Multiple microscopic technique light and scanning electrons had been employed for detailed analysis. Results reported monad pollen type in all studied 53 members, which showed its limited taxonomic value up to family level. In relation to shape of pollen both polar and equatorial views strikingly differed from each other. Like semi angular pollen observed in Dactyloctenium aegyptium (L.) Wild. whereas round-minutely irregular pollen in Lolium temulentum L. Polar and equatorial diameter also showed variation, that is, Desmostachya bipinnata (L.) Stapf. can be differentiated from Sorghum bicolor (L.) Moench on diameter variation basis. A pore characteristic does not show much qualitative variation; however pore sizes differ species to species. The most frequently scarbate sculpturing was observed in 28 species followed by verrucate. Hence it can be said that pollen shape, polar, and equatorial diameters, pore size, P/E ratio, pore sculpturing are of good taxonomic value and holds a significant position in identification and delimitation of Poaceae taxa.     

Palynological investigation of some selected species of family Fabaceae from Pakistan,using light and scanning electron microscopy techniques

Pollen morphology of 11 species of family Fabaceae that is, Trifolium alexandrinum, Trifolium resupinatum, Arachis hypogaea, Lathyrus aphaca, Medicago lupulina, Vicia sativa, Lathyrus odoratus, Pongamia pinnata, Melilotus indicus, Medicago polymorpha, Medicago sativa from Pakistan has been investigated by light and scanning electron microscopy. Pollen were generally tricolporate, radially symmetrical, isopolar, elliptic in equatorial view and triangular in polar view under LM. Results showed that pollens were per‐prolate (T. alexandrinum), prolate (T. resupinatum, V. sativa, L. odoratus, Melilotus indicus, M. polymorpha, M. sativa) and sub‐prolate (A. hypogaea, L. aphaca, M. lupulina, P. pinnata). The larger polar/equatorial (P/E) ratio was found in T. alexandrinum (2.26 μm) and the smallest was found in M. lupulina (1.21 μm). The exine of T. resupinatum was 3.00 μm in thickness while others posses smaller exine thickness. The larger pore diameter was found in P. pinnata (16.01 μm) while others have smaller. The length of colpi was larger in Arachis hypogaea (32.24) while others posses smaller. Eight types of surface ornamentation (Psilate, faintly rugulate). Perforate and rugulate to verrucate have been observed under SEM. The pollens were europalynous type. Pollen morphology proved to be useful for the specific delimitation and serve as a tool for the identification and classification of taxa at specific and generic levels and can also be used as a key for the taxonomic features. Diversity in exine sculpture is helpful indicative characters for the isolation of closely related species. Hence, it is clear that both qualitative and quantitative characters of pollen can be useful for differentiating between taxa at specific level.     

Morpho-palynological investigation of gymnospermal flora from subalpine and alpine zones of northern Pakistan using LM and SEM

The pollen morphology, with special reference to exine sculpture, of some species of the gymnosperms was assessed for the first time from the subalpine and alpine zones of western Himalayas northern Pakistan. The pollen of all these species is airborne and allergenic, so pollen morphology helps for identification of this allergenic pollen at specific level. Different morpho-palynological characteristics were analyzed including size range of pollen, polar and equatorial diameter ratio, exine ornamentation, sculpturing, exine thickness, pollen type, and shape. For accurate and quick identification of species, taxonomic key was made based on different morpho-palynological characteristics. The quantitative data were processed using SPSS software. Gymnospermal pollen includes inaperturate, rarely 1-colpate observed in (Cupressaceae), hexazonocolpate in (Ephedraceae), vesiculate, bissacate in (Pinaceae), and inaperturate in (Taxaceae). Different pollen shapes observed were prolate (4 spp), sub-spheroidal (7 spp), and oblate (1 spp). Variation was observed in exine sculpturing granular (4 spp), reticulate (1 spp), areolate-punctate (3 spp), and psilate (2 spp). This is based on the analysis of 10 plants belonging to four families of gymnosperms. Distinct pollen shape has emerged as the most diagnostic feature to separate some genera such as spheroidal in (Cupressaceae, Taxaceae), prolate and radiosymmetrical in (Ephedraceae), and bilateral in (Pinaceae). Exine thickness and sculpturing proved to be helpful at generic and specific levels. The results reinforced the significance of gymnospermal pollen morphological features which were used as aid for valuable taxonomic tool in plant systematics.     

Comparative pollen and foliar micromorphological studies using light microscopy and scanning electron microscopy of some selected species of Lamiaceae from Alpine Zone of Deosai Plateau,Western Himalayas

The study was conducted to highlight a detailed account of morphology of pollen chosen species of Lamiaceae through scanning electron microscopy, and the anatomical characteristics of leaf epidermis of seven species using simple light microscopy. In results, Anisomeles indica and Otostegia aucheri belong to subfamily Lamioideae because it has tricolpate pollen while the rest eight species belong to subfamily Nepetoideae (hexacolpate pollen). The exine sculpturing of pollen of studied species was found to be reticulate. In the family Lamiaceae, four kinds of stomata were found anomocytic, anisocytic, diacytic, and actinocytic, respectively. The cell wall patterns of epidermal cells were irregular or polygonal with straight or undulate walls. It was noted that the variety of the epidermal trichomes seems of taxonomically important for the identification of species of Lamiaceae. Both nonglandular and glandular trichomes were analyzed. The nonglandular trichomes were characterized with long, thin, and pointed apical unicellular cells. The nonglandular trichomes were A‐shaped in Thymus linearis. In Perovskia abrotanoides, stellate glandular trichomes were observed whereas in A. indica and Mentha royleana both glandular and nonglandular trichomes were found. In A. indica, the nonglandular trichomes were sessile and peltate in M. royleana. For the first time in this study, pollen and foliar micromorphological features of selected species of this area are carried out. These taxonomic characters were found to be important in discrimination of species from each other. In future, the detailed study with comprehensive morphology coupled with other important characters is required for delimitation of taxa at various levels.     

Palynological investigation of lactiferous flora (Apocynaceae) of District Rawalpindi,Pakistan, using light and scanning electron microscopy

This was the first comprehensive pollen micromorphological investigation of lactiferous flora (Apocynaceae) of District Rawalpindi, Pakistan. The pollen morphology of 10 species of the family Apocynaceae was observed and documented using light microscopy and scanning electron microscopy. Pollen was found subspheroidal in shape in most of the species, however peroblate shape was noted in Vinca major. Exine sculpturing patterns (psilate, rugulate, scabrate, and microreticulate) were observed. The result indicated that exine ornamentation of Apocynaceae taxa is systematically informative at generic and species levels. Most of the species have tricolporate type pollen but tetraporate pollen was also observed in Trachelospermum jasminoides and tetracolpate in V. major. Minimum equatorial diameter was noted in Carissa edulis (27.13 μm) and maximum in V. major (108.25 μm). Similarly, maximum exine thickness was found in Cascabela thevetia (9.5 μm). In the present findings, the pollen morphological data are compared with available other pollen studies to evaluate the taxonomic value of pollen traits in Apocynaceae taxa by using multiple microscopic techniques. Furthermore, molecular and phylogenetic studies were recommended to strengthen the systematics of Apocynaceae taxa.     

Pollen morphological variation of Berberis L. from Pakistan and its systematic importance

Due to overlapping and diverse morphological characters, Berberis is among the most taxonomically complex genera. Palynology is one of the taxonomic tools for delimitation and identification of complex species. In this study, pollens of 10 Berberis species were analyzed through light and scanning electron microscopy. Qualitative as well as quantitative features (pollen shape, size, presence or absence of colpi, colpi length and width, exine thickness, ornamentation, pollen class, aperture, and polar–equatorial ratio) were measured. Five species were observed to have colpate (pantocolpate) with elongated ends, radially symmetrical, isopolar, monads, and psilate‐regulate pollens. In polar view, six pollen were spheroidal, two were ovoid, one spherical, and one oblate. Similarly, variation in pollen length was prominent and the largest pollen on polar view was recorded for B. psodoumbellata 60–65 μm (62.4 ± 0.9), while the smallest one was observed for B. lycium 29–35 μm (32.2 ± 1). The observed variation in both quantitative and qualitative features were important in taxonomic identification. This shows that palynological characters are helpful in identification of Berberis genus at the species level.     

Pollen morphology and its implication in the taxonomy of some selected taxa of the bi and tri-ovulate Euphorbiaceae of the Hainan Island by using multiple microscopic techniques

The family Euphorbiaceae is one of the most taxonomically complex and diverse family among the angiosperm. Therefore, this study aims to document the pollen morphology of the Euphorbiaceae taxa collected from different geographical regions of the Hainan Island South China, to strengthen the taxonomy and support the subfamilial classification. The Euphorbiaceae includes 23 species and 10 genera of the bi-ovulate subfamily Phyllanthoideae and tri-ovulate Crotonoideae, Euphorbioideae, and Acalyphoideae were examined under light and scanning electron microscopy. The principal component analysis was performed by using six variables to show variation and relationships between the species. A significant variation was found in the pollen morphology (exine and colpus sculpturing). The croton-type pattern of the pollen was found the diagnostic trait of the Crotonoideae. The Euhphorboideae taxa were mostly homogenous however, variation was found in the muri pattern. The Acalyphoideae, have fossulate scabrate and verrucate exine sculpturing that can delimit from the rest of sub-families. The Phyllanthoideae, showed reticulate exine, tri to tetra-colporate having various colpus morphology. The maximum pollen size was found in Croton hirtus (59.49 × 60.86 μm) and minimum in Acalypha indica (10.86 × 73 μm). Similarly, the maximum colpus width was observed in Euphorbia pulcherrima (8.3 μm). Hence pollen traits have relevance in the taxonomy and phylogenetic of the family to define species boundaries at various taxonomic levels. This study can support and strengthen the taxonomy of subfamilies and fill the palynological gap of these taxa in Hainan Island and will contribute to future systematic studies of the Euphorbiaceae.     

Scanning Electron Microscopy (SEM) and Light Microscopy (LM)‐based Palyno‐morphological views of Solanaceae in Western Himalaya

In this study, plants belonging to family Solanaceae growing in Western Himalaya region have been observed palynologically under Light Microscope and Scanning electron microscope. Present investigation comprises of 10 genera and 23 species, namely, Atropa acuminata, Capsicum decoraticus, Capsicum frutescens, Cestrum aurantiacum, Cestrum diurnum, Cestrum nocturnum, Datura alba, Datura innoxia, Datura stramonium, Hyoscymus niger, Lycopersicon esculentum, Nicotiana rustica, Nicotiana tabacum, Petunia alba, Petunia hybrida, Solanum erianthum, Solanum melongena, Solanum miniatum, Solanum pseudocapsicum, Solanum surratense, Solanum tuberosum, Withania coagulans, Withania somnifera. Solanaceae is a eurypalynous family. Grains are usually Tricolporate and Tetracolporate, radially symmetrical, isopolar, prolate‐spheroidal to oblate‐spheroidal to oblate‐spheroidal to subprolate to per prolate or suboblate to oblate, size range: 8.55–72 μm, amb circular, semi‐angular or subangular, aperture drop‐type, labrum common‐type, exine usually 2 μm thick, nexine 1–1.5 μm thick. Tectum usually psilate, sexine reticulate, granulate or striato‐reticulate, with obscure pattern, sexine 1–2 μm thick, nexine 1–1.5 μm thick, and intine 0.5–1 μm thick. Most striking variation has been found in the shape class, aperture‐type, and tectal surface. Based on these characters, taxonomic keys have been made for correct identification of members in Solanaceae. However, the grains of this family are usually tricolporate and have direct relationship with certain members of the family Scrophulariaceae. Palyno‐morphological characters of family Solanaceae have been studied for the first time in Western Himalayan region of Pakistan. These palyno‐morphological characters are significant for identification of the members of family Solanaceae.     

Palyno-anatomical characters and their systematic significance in the family Apiaceae from Chitral,eastern Hindu Kush,Pakistan

The present study was performed to provide a detailed explanation of leaf epidermal anatomy and pollen micromorphological features of selected species of family Apiaceae from Chitral, eastern Hindu Kush region as the basis of forthcoming studies. In the present article pollen morphology of eight species and foliar epidermal of seven species of family Apiaceae have been examined through microscopic techniques. In results two types of pollen prolate (five species) and perprolate (three species) with three colpi have been recorded. The exine ornamentation was found to be regulate, striate, and cerebroid. Largest pollen was found in Heracleum leucocarpum with the polar diameter of 43.25 μm and equatorial diameter of 21.6 μm. Smallest pollen was observed in Elaeosticta chitralica with the polar diameter of 18.4 μm. The P/E ratio varied from 1.59 to 2.16. Regarding to foliar epidermal anatomy, three types of epidermal cells including rectangular, irregular, and polygonal with variation in anticlinal wall pattern were determined. In the selected species three kinds of stomata comprising anisocytic, anomocytic, and paracytic type were reported in the current research. The size of epidermal cells ranged from 106 × 42.50 μm in Bupleurum falcatum subsp. cernuum and 77.25 × 26.35 μm in Prangos pabularia in adaxial surface. Largest stomatal complex was found in Prangos pabularia both in adaxial 33.55 × 20.05 μm and abaxial 50.25 × 39.40 μm. All the observed quantitative and qualitative features of the species were proved to be useful in the delimitation of species at generic and species level.     

Pollen morphology of the genus Sophora (Fabaceae) and its taxonomic implications

The genus Sophora (Fabaceae) is one of the taxonomically challenging genera with high economic and medical values. In this study, the pollen morphology of 43 samples of 27 species, 4 subspecies, and 4 varieties of the genus Sophora and 3 closely related genera was examined using scanning electron microscopy to evaluate the pollen diversity of the genus and its taxonomic significance. Pollen grains of the studied species were tricolporate (rarely six-aperture), and pollen shape varied from suboblate, spheroidal, subprolate to prolate. Echinate external ornamentation was reported for the first time in some species of the genus. Aperture membrane ornamentation and outline in a polar/equatorial view were described for the first time in the genus. Principal component analysis was used to understand the relationship and discrimination between the species and the genera, with six components accounting for 79.92% of the total variance. Taxonomic keys based on pollen morphology were also constructed to easily identify the taxa of the genus through palynological characteristics. Results showed that pollen morphology alone is not sufficient to elucidate or reconstruct taxonomic relationships within the genus Sophora, but palynological assessments can provide some useful information for identifying taxonomically problematic taxa.