A 16-bit cascaded sigma-delta pipeline A/D converter

A low-noise cascaded multi-bit sigma-delta pipeline analog-to-digital converter （ADC） with a low over-sampling rate is presented. The architecture is composed of a 2-order 5-bit sigma-delta modulator and a cascaded 4-stage 12-bit pipelined ADC, and operates at a low 8X oversampling rate. The static and dynamic performances of the whole ADC can be improved by using dynamic element matching technique. The ADC operates at a 4 MHz clock rate and dissipates 300 mW at a 5 V/3 V analog/digital power supply. It is developed in a 0.35μm CMOS process and achieves an SNR of 82 dB.     

A cascaded sigma-delta pipeline A/D converter with 1.25 MHz signalbandwidth and 89 dB SNR

A low-noise multibit sigma-delta analog-to-digital converter (ADC) architecture suitable for operation at low oversampling ratios is presented. The ADC architecture uses an efficient high-resolution pipelined quantizer while avoiding loop stability degradation caused by pipeline latency. A 16-b implementation of the architecture, fabricated in a 0.6-μm CMOS process, cascades a second-order 5-b sigma-delta modulator with a four-stage 12-b pipelined ADC and operates at a low 8X oversampling ratio. Static and dynamic linearity of the integrated ADC are improved through the use of dynamic element matching techniques and the use of bootstrapped and clock-boosted input switches. The ADC operates at a 20 MHz clock rate and dissipates 550 mW with a 5 V/3 V analog/digital supply. It achieves an SNR of 89 dB over a 1.25-MHz signal bandwidth and a total harmonic distortion (THD) of -98 dB with a 100-kHz input signal     

Improved low-distortion sigma-delta ADC with DWA for WLAN standards

An improved low distortion sigma-delta ADC (analog-to-digital converter) for wireless local area network standards is presented. A feed-forward MASH 2-2 multi-bit cascaded sigma-delta ADC is adopted; however, this work shows a much better performance than the ADCs which have been presented to date by adding a feedback factor in the second stage to improve the performance of the in-band SNDR (signal to noise and distortion ratio), using 4-bit ADCs in both stages to minimize the quantization noise. Data weighted averaging technology is therefore used to decrease the mismatch noise induced by the 4-bit DACs, which improves the SFDR (spurious free dynamic range) of the ADC.The modulator has been implemented by a 0.18μm CMOS process and operates at a single 1.8 V supply voltage.Experimental results show that for a 1.25 MHz @ -6 dBFS input signal at 160 MHz sampling frequency, the improved ADC with all non-idealities considered achieves a peak SNDR of 80.9 dB and an SFDR of 87 dB, and the effective number of bits is 13.15 bits.     

A high-frequency and high-resolution fourth-order /spl Sigma//spl Delta/ A/D converter in BiCMOS technology

A high-performance cascaded sigma-delta modulator is presented. It has a new three-stage fourth-order topology and provides functionally a maximum signal to quantization noise ratio of 16 bits and 16.5-bit dynamic range with an oversampling ratio of only 32. This modulator is implemented with fully differential switch-capacitor circuits and is manufactured in a 2-/spl mu/m BiCMOS process. The converter, operated from +/-2.5 V power supply, +/-1.25 V reference voltage and oversampling clock of 48 MHz, achieves 97 dB resolution at a Nyquist conversion rate of 1.5 MHz after comb-filtering decimation. The power consumption of the converter is 180 mW.<>     

A 13-bit, 1.4-MS/s sigma-delta modulator for RF baseband channelapplications

A 13-bit, 1.4-MS/s, sixth-order cascaded sigma-delta modulator oversampling at 16 X is implemented in a 0.72 μm complementary metal-oxide-semiconductor process for use in the baseband path of a radio-frequency receiver. The modulator achieves 77 dB of dynamic range and dissipates 81 mW from a 3.3 V supply. It is characterized for the blocking and intermodulation requirements of a cordless telephone application     

14-bit 2.2-MS/s sigma-delta ADC's

This paper presents the design and test results of a fourth-order and sixth-order 14-bit 2.2-MS/s sigma-delta analog-to-digital converter (ADC). The analog modulator and digital decimator sections were implemented in a 0.35 μm CMOS double-poly triple-level metal 3.3-V process. The design objective for these ADC's was to achieve 85 dB signal-to-noise distortion ratio (SNDR) with less than 200 mW power dissipation. Both modulators employ a cascade sigma-delta topology. The fourth-order modulator consists of two cascaded second-order stages which include 1-bit and 5-bit quantizers, respectively. The sixth-order modulator has a 2-2-2 cascade structure and 1-bit quantizer at the end of each stage. An oversampling ratio of 24 was selected to give the best SNDR and power consumption with realizable gain-matching requirements between the analog and digital sections     

A Multi-Mode Sigma-Delta ADC for GSM/WCDMA/WLAN Applications

The demand for new telecommunication services requiring higher capacities, data rates and different operating modes have motivated the development of new generation multi-standard wireless transceivers. In multi-standard design, sigma-delta based ADC is one of the most popular choices. To this end, in this paper we present cascaded 2-2-2 reconfigurable sigma-delta modulator that can handle GSM, WCDMA and WLAN standards. The modulator makes use of a low-distortion swing suppression topology which is highly suitable for wide band applications. In GSM mode, only the first stage (2nd order ∑-Δ ADC) is used to achieve a peak SNDR of 88dB with over-sampling ratio of 160 for a bandwidth of 200KHz and for WCDMA mode a 2-2 cascaded structure (4th order) is turned on with 1-bit in the first stage and 2-bit in the second stage to achieve 74 dB peak SNDR with over-sampling ratio of 16 for a bandwidth of 2MHz. Finally, a 2-2-2 cascaded MASH architecture with 4-bit in the last stage is proposed to achieve a peak SNDR of 58dB for WLAN for a bandwidth of 20MHz. The novelty lies in the fact that unused blocks of second and third stages can be made inactive to achieve low power consumption. The modulator is designed in TSMC 0.18um CMOS technology and operates at 1.8 supply voltage.     

A 50-MHz multibit sigma-delta modulator for 12-b 2-MHz A/Dconversion

The authors examine the application of oversampling techniques to analog-to-digital conversion at rates exceeding 1 MHz. A cascaded multibit sigma-delta (ΣΔ) modulator that substantially reduces the oversampling ratio required for 12-b conversion while avoiding stringent component matching requirements is introduced. Issues concerning the design and implementation of the modulator are presented. At a sampling rate of 50 MHz and an oversampling ratio of 24, an implementation of the modulator in a 1-μm CMOS technology achieves a dynamic range of 74 dB at a Nyquist conversion rate of 2.1 MHz. The experimental modulator is a fully differential circuit that operates from a single 5-V power supply and does not require calibration or component trimming     

A cascaded continuous-time /spl Sigma//spl Delta/ Modulator with 67-dB dynamic range in 10-MHz bandwidth

This paper presents the design of a 2-2 cascaded continuous-time sigma-delta modulator. The cascaded modulator comprises two stages with second-order continuous-time resonator loopfilters, 4-bit quantizers, and feedback digital-to-analog converters. The digital noise cancellation filter design is determined using continuous-time to discrete-time transformation of the sigma-delta loopfilter transfer functions. The required matching between the analog and digital filter coefficients is achieved by means of simple digital calibration of the noise cancellation filter. Measurement results of a 0.18-/spl mu/m CMOS prototype chip demonstrate 67-dB dynamic range in a 10-MHz bandwidth at 8 times oversampling for a single continuous-time cascaded modulator. Two cascaded modulators in quadrature configuration provide 20-MHz aggregate bandwidth. Measured anti-alias suppression is over 50 dB for input signals in the band from 150 to 170 MHz around the sampling frequency of 160 MHz.     

A 14-bit, 10-Msamples/s D/A converter using multibit /spl Sigma//spl Delta/ modulation

A 14-bit digital-to-analog converter based on a fourth-order multibit sigma-delta modulator is described. The digital modulator is pipelined to minimize both its power dissipation and design complexity. The 6-bit output of this modulator is converted to analog using 64 current-steering cells that are continuously calibrated to a reference current. This converter achieves 85-dB dynamic range at 5-MHz signal bandwidth, with an oversampling ratio of 12. The chip was fabricated in a 0.5-/spl mu/m CMOS technology and operates from a single 2.5-V supply.     

A 85-dB dynamic range multibit delta-sigma ADC for ADSL-CO applications in 0.18-/spl mu/m CMOS

A high-resolution multibit sigma-delta analog-to-digital converter (ADC) implemented in a 0.18-/spl mu/m CMOS technology is introduced. The circuit is targeted for an asymmetrical digital subscriber line (ADSL) central-office (CO) application . An area- and power-efficient realization of a second-order single-loop 3-bit modulator with an oversampling ratio of 96 is presented. The /spl Sigma//spl Delta/ modulator features an 85-dB dynamic range over a 300-kHz signal bandwidth. The measured power consumption of the ADC core is only 15 mW. An innovative biasing circuitry is introduced for the switched-capacitor integrators.     

Improved low-distortion sigma-delta ADC with DWA for WLAN standards

An improved low distortion sigma-delta ADC(analog-to-digital converter) for wireless local area network standards is presented.A feed-forward MASH 2-2 multi-bit cascaded sigma-delta ADC is adopted;however,this work shows a much better performance than the ADCs which have been presented to date by adding a feedback factor in the second stage to improve the performance of the in-band SNDR(signal to noise and distortion ratio),using 4-bit ADCs in both stages to minimize the quantization noise.Data weighted ...     

Oversampled pipeline A/D converters with mismatch shaping

This paper presents a pipeline analog-to-digital converter (ADC) with improved linearity. The linearity improvement is achieved through a combination of oversampling and mismatch shaping, which modulates the distortion energy out of band. Mismatch shaping can be realized in a traditional 1-bit/stage pipeline ADC, but the ADCs transfer characteristic properties limit its effectiveness at pushing the distortion out of band. These limitations can be alleviated by using a 1-bit/stage commutative feedback capacitor switching pipeline design. A test chip was fabricated in a 0.35-μm CMOS process to demonstrate mismatch shaping. Experimental results obtained indicate that the spurious-free dynamic range improves by 8.5 dB to 76 dB when mismatch shaping is used at an oversampling ratio of 4 and a sampling rate of 61 MHz. The signal-to-noise and distortion ratio improves by 3 dB and the maximum integral nonlinearity decreases from 1.8 to 0.6 LSB at the 12-bit level     

A low-voltage low-power sigma-delta modulator for broadband analog-to-digital conversion

A cascade of sigma-delta modulator stages that employ a feedforward architecture to reduce the signal ranges required at the integrator inputs and outputs has been used to implement a broadband, high-resolution oversampling CMOS analog-to-digital converter capable of operating from low-supply voltages. An experimental prototype of the proposed architecture has been integrated in a 0.25-/spl mu/m CMOS technology and operates from an analog supply of only 1.2 V. At a sampling rate of 40 MSamples/sec, it achieves a dynamic range of 96 dB for a 1.25-MHz signal bandwidth. The analog power dissipation is 44 mW.     

A 2.5-V 14-bit, 180-mW Cascaded Σ∆ ADC for ADSL2+ Application

This paper presents a sigma-delta (SigmaDelta) analog-to-digital converter (ADC) for the extended bandwidth asymmetric digital subscriber line application. The core of the ADC is a cascaded 2-1-1 SigmaDelta modulator that employs a resonator-based topology in the first stage, three tri-level quantizers, and two different pairs of reference voltages. As shown in the experimental result, for a 2.2-MHz signal bandwidth, the ADC achieves a dynamic range of 86 d 15 and a peak signal-to-noise and distortion ratio of 78 dB with an oversampling ratio of 16. It is implemented in a 0.25-mum CMOS technology, in a 2.8 mm² active area including decimation filter and reference voltage buffers, and dissipates 180 mW from a 2.5-V power supply.     

一种14位、1.4MS/s、多位量化的级联型Σ△调制器

在 0 .6μm CMOS工艺条件下设计了一种适合 DECT(Digital Enhanced Cordless Telephone)标准的 1 .4MS/s Nyquist转换速率、1 4位分辨率模数转换器的ΣΔ调制器。该调制器采用了多位量化的级联型 (2 -1 -1 4b)结构 ,通过 Cadence Spectre S仿真验证 ,在采样时钟为 2 5 MHz和过采样率为 1 6的条件下 ,该调制器可以达到 86.7d B的动态范围 ,在 3 .3 V电源电压下其总功耗为 76m W。     

Design and Analysis of an Oversampling D/A Converter in DMT-ADSL Systems

Oversampling sigma-delta digital-to-analog converters are crucial building blocks for telecommunication applications. To reduce power consumption, lower oversampling ratios are preferred thus high-order digital sigma-delta modulators are needed to meet the dynamic performance requirements. This paper presents an oversampling DAC with 1.104 MHz signal bandwidth for DMT-ADSL application and focuses on the design issues of the high-order one-bit multiple feedback modulators (such as the stability problem, good inband SNDR performance, limit cycles, etc.). A new approach to obtain and optimize the stable feedback coefficients has been presented. From our analysis results it is found that the extra feedback coefficients and scaling coefficients in the modulator have non-negligible impact on the behavior of the limit cycles, and design guide for selecting the scaling coefficients is provided. Finally a 5th-order modulator with an oversampling ratio of 32 and 14-bit input has been implemented in a 0.6 m 3.3 V CMOS process and integrated into the whole DAC chip.     

A 2.5-V sigma-delta modulator for broadband communicationsapplications

Oversampled sigma-delta (EA) modulators offer numerous advantages for the realization of high-resolution analog-to-digital (A/D) converters. This paper explores how oversampling and feedback can be employed in high-resolution ΣΔ modulators to extend the signal bandwidth into the range of several megahertz when the oversampling ratio is constrained by technology limitations. A 2-2-1 cascaded multibit architecture suitable for operation from a 2.5-V power supply is presented, and a linearization technique referred to as partitioned data weighted averaging is introduced to suppress in-band digital-to-analog converter (DAC) errors. An experimental prototype based on the proposed topology has been integrated in a 0.5-μm double-poly triple-metal CMOS technology. Fully differential double-sampled switched-capacitor integrators enable the modulator to achieve 95-dB dynamic range at a 4-Msample/s Nyquist conversion rate with an oversampling ratio of 16. The experimental modulator dissipates 150 mW from a 2.5-V supply     

A 1.8 V 15-bit 1 mW 2nd-Order Sigma-Delta Modulator

Low-voltage low-power sigma-delta modulators provide a critical interface in portable mixed-signal electronic systems. This paper deals with the design andimplementation of a low-voltage, low-power 2nd-ordersigma-delta modulator operating from a single 1.8 V powersupply using a conventional 3.3 V, double-poly, 0.35 mCMOS process, based on fully-differentialswitched-capacitor techniques. All the circuit blocks areintegrated on one chip, and the input common-mode voltageis set at mid-rail, resulting in low power dissipation,minimum off-chip components, and high efficiency,flexibility and compatibility. The design is useful forvoice applications in personal communications systemssupplied by two nickel-cadmium or alkaline batteries. Themodulator exhibits a 15-bit dynamic range for a 7 kHzbandwidth, and a 14-bit dynamic range for a 20 kHzbandwidth at an oversampling frequency of 2.56 MHz. Thepeak SNDR reaches 62 dB. The complete 2nd-order modulatorhas a power dissipation of 0.99 mW, and occupies 0.31mm² die area excluding bonding pads.     

A Low-Voltage and Low-Power Adaptive Switched-Current Sigma–Delta ADC for Bio-Acquisition Microsystems

An ultralow-voltage and low-power adaptive sigma-delta analog-to-digital converter (SDADC) with a 10-bit dynamic range for bio-microsystem applications is presented. The proposed SDADC includes a switched-current sigma-delta modulator (SISDM) and a digital decimator. In order to achieve the low-voltage requirement, a novel class-AB switched-current memory cell is adopted to implement the SISDM with the oversampling ratio (OSR) of 64. In addition, a proposed differential current comparator and a low-voltage 1-bit switched-current digit-to-analog converter (SIDAC) are used for the design of the SDM. Benefits from the SISDM using the class-AB memory cell are low power consumption and high dynamic range. Moreover, a new single-multiplier structure is presented to implement the finite-impulse-response (FIR) digital filters which are the major hardware elements in the decimator. For the various applications with different biosignal frequencies, the SDADC could be manipulated in different operating modes. The overall ADC has been implemented in a TSMC 0.18-mum 1P6M standard CMOS process technology. Without a voltage booster to raise the gate voltage of switches, measurement results show that the SISDM has a dynamic range over 60 dB and a power consumption of 180 muW with an input signal of 1.25-kHz sinusoid wave and 5-kHz bandwidth under a single 0.8-V power supply for electroneurography signals. In addition, the postlayout simulations of SDADC including SISDM and decimator reveal that the dynamic range is still over 60 dB without degrading by digital circuits