中国传统戏场声学问题初探

中国传统戏曲历史悠久,在公元11～14世纪的宋、元时代已趋成熟.传统戏曲演出的舞台形式特殊,多半为亭式建筑,三面敞开并伸入听众席.以虚拟时空为特点的传统戏曲表演形式,只需在一裸台上进行.因此不高的舞台顶棚(不少还是穹顶)和后墙组成的声反射罩,既有利于声音反射至听众,也可给演唱者获得声学上支持,使演唱更为舒畅.实测资料表明,传统式中型厅堂戏场的混响时间取1.0s左右是合适的.研究传统戏场的这些建筑声学特征,对于建造现代剧场也有参考价值.     

戏剧舞台台口的拾音

舞台艺术形式多种多样,对不同形式的艺术演出,也要采取不同种类的传声器进行拾音。一般的歌剧、话剧、戏曲文艺形式的演出,主要演员都佩戴领夹式无线传声器进行拾音,但是次要演员和群众演员不能都佩戴无线传声器,为了使次要演员和群众演员的声音也能被传声器拾取进来,一般在舞台的台口装3支强指向型传声器,舞台表演区的声音分布见图1。(1)强音区域:2号传声器可以拾取的区域,1号传声器、3号传声器也可以部分拾取的区域。(2)次强区域:1号传声器可以拾取的区域,2号传声器也可以部分拾取的区域。(3)次强区域:3号传声器可以拾取的区域,2号传声器…     

活字印刷形式在现代设计领域中的应用

以活字印刷形式为切入点,论述了其在标志设计、海报设计、书籍设计、产品造型设计、装饰背景设计、装置展示设计、舞台表演等现代设计领域的广泛应用。分析了活字印刷形式不再是印刷技术的体现,而具备了更多的象征意义和符号功能。提出了文化内涵的延续是继承传统文化的关键,而纯粹形式的沿用也是传承传统文化的手段之一。     

再现艺术之美

去年,第七届中国艺术节期间,我拍摄了一些剧目的舞台片,感受了一次舞台片创作的乐趣.拍摄舞台片,不论是戏曲还是歌舞,如何在表演艺术的基础上,再现摄影艺术之美,是舞台片拍摄的重中之重.     

戏曲综艺演出的现场录音

根据演播室的声学特性和戏曲节目的艺术特性,在戏曲综艺演出时,拾取戏曲乐队声时采用A/B制立体声拾音技术,拾取舞台表演区效果声时采用DECCA TREE制立体声拾音技术,拾取观众区效果声时采用ABCDE制立体声拾音技术等,在现场主扩声达到较好的音色质量,观众在任何位置都能获得良好的听音效果;同时播出录制质量也达到较好的立体声效果。     

我是一名党员“做好本职工作，创优争先”

京剧艺术的发展历史是在我国民族古老戏曲艺术创作成果的基础上成长起来的，在某种意义上已经成为中国文化艺术的图腾，它之所以取得今天的辉煌成就，是在其发展一百多年的历史过程中，经过几辈人悉心继承，努力创新的结果．在这段历史进程中，京剧舞台上涌现出的名家巨匠，势如河汉繁星、不胜枚举，其中，老旦行当的发展成熟，以及这些艺术家们所塑造的众多生动鲜活的艺术形象，有着宝贵的艺术价值，为我国民族戏曲艺术谱写了辉煌的篇章．     

多功能剧院音乐反射罩的设计与应用

当剧院兼用大型交响乐、室内乐或合唱音乐演出时,舞台上必须增设音乐反射罩,既有助于将乐队演奏声返送至听众席和平衡乐队演出,也可改善观众厅内的音质。音乐反射罩是多功能剧院舞台工艺的重要设施之一。主要介绍音乐反射罩的六个工程应用实例,并对增设乐罩前后观众厅的实测结果作分析总结。对比舞台上增设乐罩前后观众厅音质参量混响时间、早期衰变时间、明晰度和声场力度的变化,发现舞台增设乐罩后,显著降低了舞台空间和观众厅空间的耦合作用,两者形成一个整体使观众厅有效声学容积增大。由于乐罩对低频声能的吸收,低频混响时间不但没有提升,反而略有下降。单就混响时间的频率特性而言,增设乐罩的多功能剧院与专业音乐厅仍存在较大的差距。增设乐罩后,观众厅内明晰度降低,而声场力度得到了较大的提升。     

给演员加装监听扬声器

根据笔者多年演出中的调音经验,在适当场合下给演员加装监听扬声器是必要。演员演唱的要求在歌剧、话剧、戏曲等形式的演出中,当演员在舞台台口演唱时,可以听到剧场中的混响声。但由于舞台的表演区域比较大,演员因所饰角色和戏剧情节的要求,不太可能总处在舞台台口。而处在比较深入的舞台表演区时,演员听不到剧场中的混响声,常会感觉自己的演唱很干涩且声音很小,因而会要求音响师将其声音开大一些。这种情况多数音响师都曾碰到过。此时,需要音响师作出正确的判断,如果确实是演员演唱的声音过小,提升一下音量即可;但如果将演员的声音加大到演…     

强指向型压力区（PZM）传声器

在歌舞晚会中,尤其是一些中小型舞台演出,舞台台口的3支强指向型传声器距离大幕比较近。大幕在开启和关闭时,传声器容易被刮倒或者拾音方向被刮偏,破坏演出的音响效果。所以,有一些歌舞团选用强指向型压力区(PZM)传声器,也称反射型传声器。它是一个黑板擦大小的平板,可以平放在舞台台口上。其优点是可以避免大幕开启和关闭时被刮倒、刮偏,     

新媒体时代下黄梅戏的有效传播和发展探究

近些年来,各大传统戏曲发展式微,黄梅戏也面临窘境。随着新媒体的兴起,作为中国传统文化重要组成部分的戏曲如何与新媒体相结合,是新世纪以来戏曲发展面临的一个重要课题。本文分析新媒体时代黄梅戏发展和传播的优势及劣势所在,探究如何借助新媒体实现戏曲的可持续发展。     

Estimation of Parameters of Universal Distribution of Moments of Failure of Products

A method is proposed for estimating the parameters of a mixture of exponential and Weibull distributions for which the accuracy of preliminary estimates obtained by graphical analysis is refined in accordance with the criterion of maximum likelihood. The efficiency of the proposed method is supported by the results of statistical modeling.     

Evaluation of optical properties of highly scattering media by moments of distributions of times of flight of photons

A novel method for the determination of the optical properties of tissue from time-domain measurements is presented. The data analysis is based on the evaluation of the first moment and the second centralized moment, i.e., the mean time of flight and the variance of the measured distribution of times of flight (DTOF) of photons injected by short (picosecond) laser pulses. Analytical expressions are derived for calculation of absorption and of reduced scattering coefficients from these moments by application of diffusion theory for infinite and semi-infinite homogeneous media. The proposed method was tested on experimental data obtained with phantoms, and results for absorption and reduced scattering coefficients obtained by the proposed method are compared with those obtained by fitting of the same data with analytical solutions of the diffusion equation. Furthermore, the accuracy of the moment analysis was investigated for a range of integration limits of the DTOF. The moment analysis may serve as a comparatively fast method for evaluating optical properties with sufficient accuracy and can be used, e.g., for on-line monitoring of optical properties of biological tissue.     

Analysis of the rate of propagation of the wave of change of boiling modes

An approximate analytical expression is derived for the velocity of the front of the wave of change of boiling modes on a rod and on a plate. The impact of the Thomson effect and of the heater orientation in the gravity field is included. Adequate agreement is demonstrated between the derived relations and experimental data.     

Estimation of potentialities of methods of summation of direct measurement errors

Conventional methods for summation of direct measurement errors are considered. Conditions under which these methods provide consistent results are stated. It is proposed to utilize for characteristic of the total error, its interval estimator or the half-sum of the value obtained by adding up its arithmetic and geometric random errors.Translated from Izmeritel'naya Tekhnika, No. 4, pp. 10–12, April, 1995.     

空压机轴承箱蜗壳温度探头油封改造

由于空压机进气侧轴承箱蜗壳温度探头密封效果不好,使空压机及其后续管道受到油污染。后将温度探头的O形圈密封改为骨架油封,杜绝了轴承箱漏油问题。文章简介空压机的结构和技术参数,详细介绍了骨架油封的制作和优点。     

Characteristics of mechanical properties of materials in studies of conditions of attainment of marginal states

It is shown that conditions of attainment of marginal states in the material of structural components are formulated on the basis of analysis of force and deformation criteria of formation and development of destruction. The parameters of these criteria are data on types of structural materials, standard and special characteristics of their mechanical properties, structural forms of considered elements of the equipment, and their operating stress loading. In this case, the construction of a system of state equations for describing interrelation of current damage, external actions, and responses to them is based on the concept of calculating variations in properties of materials at all stages of the design life cycle.     

Determination of parameters of microstructural inhomogeneity of deformation of metals by the method of modeling

The article suggests a method of evaluating the microstructural inhomogeneity of deformation of metals by modeling. The method includes the measurement of deformations of metal according to meshes of a dividing grid with small base and the calculation of the distribution parameters of microdeformations in model representation. It is shown that the modeling method makes it possible objectively to evaluate the microinhomogeneity of deformation of metals independently of the chosen mesh size of the dividing grid. New structural characteristics are introduced: the base and wave of variation expressing the degree of crumbling or amalgamation of metal grains by inhomogeneity of deformation.Translated from Problemy Prochnosti, No. 7, pp. 40–44, July, 1991.