基于协同通信的移动自组网广播方案设计

移动自组网中大多采用冲突避免协议,广播时存在大量的冗余数据及信道冲突,在复杂的信道环境下会降低系统的通信效率。结合协同通信与动态时隙分配技术,提出了一种基于协同通信的移动自组网广播方案。该方案分成竞争、控制报文和数据传输3个阶段。竞争阶段利用基于载波侦听多址访问（Carrier Sense Multiple Access,CSMA）的广播网络洪泛少量竞争报文,分配广播权限;控制报文阶段结合协同通信,利用时隙分配算法完成节点的时隙分配;数据传输阶段,利用协同通信结合时分多址（Time Division Multiple Access,TDMA）动态时隙分配算法,使得节点能够充分利用信道资源进行数据发送,避免节点间的相互竞争,提高数据传输效率。     

基于TDMA和定向天线的无线Mesh网络广播技术

传统Mesh网络实现的广播过程中存在节点之间冲突干扰、广播延时大和信道利用率不高等问题。采用TDMA接入协议与多接口的定向天线,优化了邻居发现过程和信道分配过程。在QualNet软件上进行仿真,并与其他算法进行性能对比,仿真和对比结果表明本广播过程相较于传统广播过程,减少了邻居发现时间,提高了时隙的复用率和信道利用率,整体上提升了广播过程的性能。     

一种时分接入高速可靠无线传感器网络协议

针对无线传感器网络数据采集系统中的提升数据吞吐能力、传输可靠性,文章提出了一种基于数据包协调的时分媒体接入协议,vaTDMA。通过节点间小体积数据包交互,分配节点信道接入时机。规避传统TDMA中传输时隙的必要冗余,并将其集中于采样周期的尾端,增加了数据包传输机会;通过重传算法提高传输可靠性。实验结果表明,文章提出的无线传感器网络通讯协议的有效性。     

基于动态优先级表的TDMA时隙分配

Ad Hoc网络组网效率提升的一个重要方面就是研究高效的时隙分配算法,动态TDMA时隙分配机制已经成为提高组网效率的一个热门研究点。这里基于动态优先级表提出一种新颖的动态时隙分配算法,该算法能在时间维上保证各节点对空闲时隙资源竞争使用的公平性。仿真结果表明基于动态优先级表的时隙分配算法能高效利用时隙资源,提高信道利用率。     

协作重传的动态TDMA时隙分配算法

协作通信可以有效地降低衰落信道中数据传输的中断概率,从而提高数据的传输速率。但是在TDMA系统中采用协作通信必然引入额外的带宽开销,为了提高传输速率而采用协作通信,是否能克服因此而产生的不利因素并不明确。在提出的CD-TDMA时隙算法中,在传统TDMA帧的前部增加了一个侦听和动态分配时隙的预约阶段。所有节点在每个数据帧的开始如果没有新产生的数据,则有义务协作转发其他节点在上个时隙帧中发送失败的数据。该算法提高了数据重传的成功概率,提高了整个网络的吞吐量。仿真结果表明,尽管该算法引入了额外的时隙开销,和传统的TDMA接入方式相比,该算法可以有效地提高整个网络的吞吐量。     

一种基于固定TDMA的无冲突动态时隙分配算法

本文提出了一种适用于Adhoc网络的动态时隙分配TDMA算法——IP-TDMA算法,该算法以一种新颖的方式在固定TDMA的基础上叠加了优先级竞争机制,既有最差性能保障,又有较高信道利用率。通过采用一种特殊的帧结构,P-TDMA算法还可以避免信令分组的碰撞,是一种有效而又可靠的广播动态时隙分配TDMA算法。仿真结果表明,无论在吞吐量还是迟延方面,P-TDMA算法都比固定TDMA表现出更好的性能。     

EASA：一种分簇Ad Hoc网络高效自适应TDMA时隙分配算法

 提出一种适合于分簇Ad Hoc网络的高效自适应TDMA时隙分配算法EASA. EASA采用动态调整帧长以及根据簇内节点MAC层缓存队列长度进行自适应的时隙分配,解决了传统TDMA时隙分配算法中低传输速率节点占用不必要时隙的问题. 多个场景的实验结果表明,与传统TDMA时隙分配算法以及802.11相比,EASA可以大大提高网络吞吐量,很好的提高网络整体性能.     

基于定向天线的移动自组网TDMA协议研究

传统的移动自组网大多采用全向天线组网,为提高传输距离、减少时隙冲突、提高时隙利用率,因此在组网过程中引入定向天线。为解决移动自组网中因引入定向天线带来的时隙冲突问题,论文从研究较为成熟的DTRA协议出发,通过在帧结构中增加随机微时隙的方式来减少时隙冲突。为给网络中各节点提供高效、公平的时隙分配策略,论文改进了DTRA协议中的时隙预留过程,提出了基于节点自身缓存队列数分配不同优先级时隙数目的动态时隙分配算法。通过提出的DTDMA协议与DTRA协议进行的对比仿真,验证了提出的DTDMA协议能够有效减少时隙冲突,且协议在保证高优先级节点可多申请数据时隙的前提下,改善了节点接入信道的公平性。     

基于定向天线的移动自组网TDMA协议研究

传统的移动自组网大多采用全向天线组网,为提高传输距离、减少时隙冲突、提高时隙利用率,因此在组网过程中引入定向天线。为解决移动自组网中因引入定向天线带来的时隙冲突问题,论文从研究较为成熟的DTRA协议出发,通过在帧结构中增加随机微时隙的方式来减少时隙冲突。为给网络中各节点提供高效、公平的时隙分配策略,论文改进了DTRA协议中的时隙预留过程,提出了基于节点自身缓存队列数分配不同优先级时隙数目的动态时隙分配算法。通过提出的DTDMA协议与DTRA协议进行的对比仿真,验证了提出的DTDMA协议能够有效减少时隙冲突,且协议在保证高优先级节点可多申请数据时隙的前提下,改善了节点接入信道的公平性。     

一种基于优先级的TDMA时隙接入算法

文章为TDMA时隙动态调整提供一种基于优先级的随机统一多址接入算法,通过用户的平台类型、用户的活动因子和新入网以及已经在网的用户,考虑用户的优先级和平台类型的优先级实现时隙的动态调整和时隙复用,解决了TDMA网络的不同类型用户信息传输时隙分配问题。     

Resolution Enhancement Technology:Integrated Process Solutions using OPC

DUV lithography, using the 248 nm wavelength, is a viable manufacturing option for devices with features at 130 nm and less. Given the low kl value of the lithography, integrated process development is a necessary method for achieving acceptable process latitude. The application of assist features for rule based OPC requires the simultaneous optimization of the mask, illumination optics and the resist.Described in this paper are the details involved in optimizing each of these aspects for line and space imaging.A reference pitch is first chosen to determine how the optics will be set. The ideal sigma setting is determined by a simple geometrically derived expression. The inner and outer machine settings are determined, in turn,with the simulation of a figure of merit. The maximum value of the response surface of this FOM occurs at the optimal sigma settings. Experimental confirmation of this is shown in the paper.Assist features are used to modify the aerial image of the more isolated images on the mask. The effect that the diffraction of the scattering bars (SBs) has on the image intensity distribution is explained. Rules for determining the size and placement of SBs are also given.Resist is optimized for use with off-axis illumination and assist features. A general explanation of the material' s effect is discussed along with the affect on the through-pitch bias. The paper culminates with the showing of the lithographic results from the fully optimized system.     

Cost-effective test solutions for smart card and other integrated flash applications

From its emergence in the late 1980s as a lower cost alternative to early EEPROM technologies, flash memory has evolved to higher densities and speedsand rapidly growing acceptance in mobile applications.In the process, flash memory devices have placed increased test requirements on manufacturers. Today, as flash device test grows in importance in China, manufacturers face growing pressure for reduced cost-oftest, increased throughput and greater return on investment for test equipment. At the same time, the move to integrated flash packages for contactless smart card applications adds a significant further challenge to manufacturers seeking rapid, low-cost test.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Study of waveguide coupling efficiency in hybrid silicon lasers

This paper presents a new method to increase the waveguide coupling efficiency in hybrid silicon lasers. We find that the propagation constant of the InGaAsP emitting layer can be equal to that of the Si resonant layer through improving the design size of the InP waveguide. The coupling power achieves 42% of the total power in the hybrid lasers when the thickness of the bonding layer is 100 nm. Our result is very close to 50% of the total power reported by Intel when the thickness of the thin bonding layer is less than 5 nm. Therefore, our invariable coupling power technique is simpler than Intel＇s.     

Curved crystal spectrometer for the measurement of X-ray lines from laser-produced plasmas

In order to diagnose the laser-produced plasmas, a focusing curved crystal spectrometer has been developed for measuring the X-ray lines radiated from a laser-produced plasmas. The design is based on the fact that the ray emitted from a source located at one focus of an ellipse will converge on the other focus by the reflection of the elliptical surface. The focal length and the eccentricity of the ellipse are 1350 mm and 0.9586, respectively. The spectrometer can be used to measure the X- ray lines in the wavelength range of 0.2-0.37 nm, and a LiF crystal （200） （2d = 0.4027 nm） is used as dispersive element covering Bragg angle from 30° to 67.5°. The spectrometer was tested on Shengnang- Ⅱ which can deliver laser energy of 60-80 J/pulse and the laser wavelength is 0.35 μm. Photographs of spectra including the 1 s2p ^1P1-1s^2 ^1S0 resonance line（w）, the 1s2p ^3P2-1s^2 1S0 magnetic quadrupole line（x）, the 1s2p ^3P1-1 s^2 ^1S0 intercombination lines（y）, the 1 s2p ^3S~1-1 s^2 ^1S0 forbidden line（z） in helium-like Ti Ⅹ Ⅺ and the 1 s2s2p ^2P3/2-1 s622s ^2S1/2 line（q） in lithium-like Ti Ⅹ Ⅹhave been recorded with a X-ray CCD camera. The experimental result shows that the wavelength resolution（λ/△ 2） is above 1000 and the elliptical crystal spectrometer is suitable for X-ray spectroscopy.     

Preparation and Characterization of TaN ALD Precursors

High purity organic-tantalum precursors for thin film ALD TaN were synthesized and characterized.Vapor pressure and thermal stability of these precursors were studied.From the vapor pressure analysis,it was found that TBTEMT has a higher vapor pressure than any other published liquid TaN precursor,including TBTDET,TAITMATA,and IPTDET.Thermal stability of the alkyl groups on the precursors was investigated using a 1H NMR technique.The results indicated that the tertbutylimino group is the most stable group on TBTDET and TBTEMT as compared to the dialkylamido groups.Thermal stability of TaN precursors decreased in the following order:TBTDET ＞ PDMAT ＞ TBTEMT.In conclusion,precursor vapor pressure and thermal stability were tuned by making slight variations in the ligand sphere around the metal center.     

A rigorous proof of MIMO channel capacity’s increase with antenna number

It is well known that adding more antennas at the transmitter or at the receiver may offer larger channel capacity in the multiple-input multiple-output（MIMO） communication systems. In this letter, a simple proof is presented for the fact that the channel capacity increases with an increase in the number of receiving antennas. The proof is based on the famous capacity formula of Foschini and Gans with matrix theory.     

Electronic Structure of Semiconductor Nanocrystals

This paper reviews our recent development of the use of the large-scale pseudopotential method to calculate the electronic structure of semiconductor nanocrystals, such as quantum dots and wires, which often contain tens of thousands of atoms. The calculated size-dependent exciton energies and absorption spectra of quantum dots and wires are in good agreement with experiments. We show that the electronic structure of a nanocrystal can be tuned not only by its size,but also by its shape. Finally,we show that defect properties in quantum dots can be significantly different from those in bulk semiconductors.