Legitimate Skew Clock Routing with Buffer Insertion

In this paper, we propose a new quick and effective legitimate skew clock routing with buffer insertion algorithm. We analyze the optimal buffer position in the clock path, and conclude the sufficient condition and heuristic condition for buffer insertion in clock net. During the routing process, this algorithm integrates buffer insertion and node merging together, and performs them in parallel. Compared with the method of buffer insertion after zero skew clock routing, our method improves the maximal clock delay by at least 48%. Compared with legitimate skew clock routing algorithm with no buffer, this algorithm further decreases the total wire length and gets reductions from 42 to 82% in maximal clock delay. The experimental results show that our algorithm is quick and effective. Xinjie Wei received his B.Sc. degree in Computer Science from the PLA Nanjing Institute of Communications Engineering in 1993, and got M.S. degree in Computer Science from Xidian University in 1998. He is currently pursuing the Ph.D. degree at Tsinghua University. His research interests include computer network security, neural network and design automation for VLSI circuits and systems. And the major research attention is focused on VLSI physical design. Yici Cai received BSc degree in Electronic Engineering from Tsinghua University in 1983 and received in and MS degree in Computer Science & Technology from Tsinghua University in 1986, She has been an associate professor in the Department of Computer Science & Technology, Tsinghua University. Beijing, China. Her research interests include VLSI layout theory and algorithms. Meng Zhao has been an researcher in Semiconductor Industry Association of Beijing. She received her Bachelor of Engineering degree in Electronical Engineering from Tsinghua University, China, in 2000. She received her Master of Science degree in Computer Science from Tsinghua University, China, in 2003. Her research interests include VLSI design and CAD, Electronical material and device, VLSI verification and so on. Xianlong Hong graduated from Tsinghua University, Beijing, China in 1964. Since 1988, he has been a professor in the Department of Computer Science Technology, Tsinghua University. His research interests include VLSI layout algorithms and DA systems. He is the fellow of IEEE and the Senior Member of Chinese Institute of Electronics.     

A Realistic Timing Test Model and Its Applications in High-Speed Interconnect Devices

This paper extends the timing test model in [5] to be more realistic by including the effects of the test fixtures between a device under test and a tester. The paper enables analyzing the trade-offs that arise between the predicted yield and the required overall test environment timing accuracy (OTETA) which involves the tester overall timing accuracy (OTA) and the test fixtures' impacts. We specifically focus on the application of the extended model to predict the test yield of standard high-speed interconnects, such as PCI Express, Parallel/Serial RapidIO, and HyperTransport. The extended model reveals that achieving an actual yield of 80% with a test escape of 300 DPM (Defects Per Million) requires an equivalent OTETA that is about half the acceptable absolute limit of the tested parameter. Baosheng Wang received his B.S. degree from Beijing University of Aeronautics and Astronautics (BUAA), Beijing, P.R. China, in 1997 and M.S. degree from Precision Instrument & Mechanical Engineering from the Tsinghua University, Beijing, P. R. China in 2000. In 2005, he received his Ph.D. degree in Electrical Engineering from the University of British Columbia (UBC), Vancouver, BC, Canada. During his Master study, he was doing MEMS, Micro Sensors and Digital Signal processing. From 2000 to 2001, he worked in Beijing Gaohong Telecommunications Company as a hardware engineer in ATM technology. Currently, he is a Design-for-Test (DFT) engineer at ATI Technologies Inc., Markham, Ontario, Canada. He publishes widely at international conferences and journals. His primary research interests are time-driven or timing-oriented testing methodologies for System on-a-Chip (SoC). These fields include test time reduction for SRAMs, accelerated reliability test for non-volatile memories, yield analysis for SoC timing tests, SoC path delay timing characterization and embedded timing measurements. Andy Kuo is currently a Ph.D student of System on a Chip (SoC) Research Lab at the Department of Electrical and Computer Engineering, University of British Columbia. He received his M.A.Sc. and B.A.Sc in electrical and computer engineering from University of British Columbia and University of Toronto in 2004 and 2002 respectively. His research interests include high-speed signal integrity issues, jitter measurement, serial communications. Touraj Farahmand received the B.Sc. degree in Electrical Engineering from Esfahan University of Technology, Esfahan, Iran in 1989 and the M.Sc. in Control Engineering from Sharif university of Technology, Tehran, Iran in 1992. After graduation, he joined the Electrical and Computer Research center of Esfahan University of Technology where he was involved in the DSP algorithm development and design and implementation of the control and automation systems. Since October 2001, he has been working in the area of high-speed signal timing measurement at SoC (System-on-a-Chip) lab of UBC (University of British Columbia) as a research engineer. His research interests are signal processing, jitter measurement, serial communication and control. André Ivanov is Professor in the Department of Electrical and Computer Engineering, at the University of British Columbia. Prior to joining UBC in 1989, he received his B.Eng. (Hon.), M. Eng., and Ph.D. degrees in Electrical Engineering from McGill University. In 1995–96, he spent a sabbatical leave at PMC-Sierra, Vancouver, BC. He has held invited Professor positions at the University of Montpellier II, the University of Bordeaux I, and Edith Cowan University, in Perth, Australia. His primary research interests lie in the area of integrated circuit testing, design for testability and built-in self-test, for digital, analog and mixed-signal circuits, and systems on a chip (SoCs). He has published widely in these areas and holds several patents in IC design and test. Besides testing, Ivanov has interests in the design and design methodologies of large and complex integrated circuits and SoCs. Dr. Ivanov has served and continues to serve on numerous national and international steering, program, and/or organization committees in various capacities. Recently, he was the Program Chair of the 2002 VLSI Test Symposium (VTS'02) and the General Chair for VTS'03 and VTS'04. In 2001, Ivanov co-founded Vector 12, a semiconductor IP company. He has published over 100 papers in conference and journals and holds 4 US patents. Ivanov serves on the Editorial Board of the IEEE Design and Test Magazine, and Kluwer's Journal of Electronic Testing: Theory and Applications. Ivanov is currently the Chair of the IEEE Computer Society's Test Technology Technical Council (TTTC). He is a Golden Core Member of the IEEE Computer Society, a Senior Member of the IEEE, a Fellow of the British Columbia Advanced Systems Institute and a Professional Engineer of British Columbia. Yong Cho received the B.S. degree from Kyung Pook National Unviersity, Korea, in 1981 and the M.S. degree from in electrical and computer engineering from the University of South Carolina, Columbia, S.C., in 1988 and the Ph.D. degree in electrical engineering and applied physics from Case Western Reserve University, Cleveland, OH, in 1992. He is currently a Professor with the Department of Electronics Engineering, Konkuk University, Seoul, Korea. His recent research interests include SoC Design and Verification, H/W and S/W co-design, and embedded programming on SoC. Sassan Tabatabaei received his PHD in Electrical Engineering from the University of British Columbia, Vancouver, Canada in 2000. Since then, he has held several senior technical positions at Vector12 Corp, Guide Technology, and Virage Logic. His professional and research interests include mixed-signal design and test, and signal integrity and jitter test methodologies for high-speed circuits and multi-Gbps serial interfaces. He has published several papers and holds a US patent in the area of timing and jitter measurement. Currently, he holds the position of the director for embedded test at Virage Logic Corporation.     

Simplified Modeling of a Multipole Amplifier Using All-Pass Network Functions

This paper presents a system model for the representation of amplifiers that cannot be accurately characterized by a classical two pole transfer function. The effects of higher order poles are modeled by an all-pass function added to the conventional two pole model. The accuracy of the model is demonstrated by comparing the results for a typical CMOS amplifier to those obtained from device level simulations using SPICE. This model can be easily implemented in a standard simulator and is shown to achieve fast simulation time. This model is expected to have application in system level modelling of mixed-signal circuits using conventional SPICE simulators.Yihong Dai received his B.S. and M.Eng. degrees in Electrical Engineering from Shanghai JiaoTong University, Shanghai, China in 1993 and 1996, respectively. From 1996 to 1998, he enjoyed his industrial experiences in Shanghai with semiconductor companies like Shanghai Nortel Semiconductor and Motorola Electronics (China) Shanghai Branch. Since 1998, he has been a research assistant at the Analog and Mixed-signal Laboratory of the Electrical Engineering Department of Brigham Young University working toward his Ph.D. During the summer of 1999, he was with AMI semiconductor Utah Research and Design Center where he developed a threshold voltage based CMOS voltage reference architecture. In the summer of 2001, he was with Ultra Design where he designed a reference amplifier for high speed digital-to-analog converters. His research interest includes voltage reference, reference amplifier and high speed data converters in both CMOS and GaAs processes.Donald T. Comer received the B.S, M.S., and Ph.D. degrees from San Jose State University, the University of California (Berkeley), and the University of Santa Clara, respectively, all in electrical engineering. He began teaching at San Jose State University in 1961 and mixed his teaching and industrial work until he left San Jose State University in 1979. He has worked for California Technical Industries, IBM Corp., Mobility Systems, Precision Monolithics, Storage Technology Corp., and Analog Devices during his career. He founded the AMI Utah Research and Design Center in 1998 that specializes in MOS design. In 2002, Dr. Comer founded Ultra Design, a design center that specializes in high-frequency heterojunction circuit designs. He holds fifteen patents and has published over 50 articles dealing with solid-state and integrated circuits. He has published five textbooks in the field of large-signal and integrated circuits. He formerly held the Quentin Berg Chair at Penn State Harrisburg from 1990 to 1995. He is now a professor of electrical and computer engineering at Brigham Young University where he held the Endowed Chair of Engineering from 1995 to 1998.David J. Comer received the B.S., M.S., and Ph.D. degrees from San Jose State University, the University of California (Berkeley), and Washington State University, respectively, all in electrical engineering. He has worked for IBM Corp., Pacific Electromagnetics, Lawrence Livermore Laboratories, and Intel Corporation. He began his teaching career at the University of Idaho and has taught at the University of Calgary and California State University, Chico. He is presently a professor of electrical and computer engineering at Brigham Young University. He served as Chairman of the Division (Dean) of Engineering at CSU, Chico and as Department Chair at BYU.While at CSU, Chico, Dr. Comer served on the statewide Engineering Liaison Committee and served as Chair of the Council of California State University Deans of Engineering.Dr. Comer has published twelve textbooks and over 60 articles in the field of circuit design. He has contributed sections to the Encyclopedia of Physical Science and Technology and holds seven patents. He was given the Professional Achievement Award at CSU, Chico and was named the Outstanding Teacher of Engineering at BYU. He has also held the College of Engineering Research Chair at Brigham Young University.Darren Korth received the B.S. and M.S. degrees in electrical engineering at Brigham Young University, Provo, Utah in 1999. He is currently pursuing a Ph.D. in electrical engineering. He served as an instructor for the Department of Electrical and Computer Engineering at Brigham Young University from 2000 to 2002. From 2001 to 2003, he also worked as a senior design engineer at UltraDesign, LLC, Provo, Utah where he researched high-speed data converter circuits. He is currently with AMI Semiconductor in their RF CMOS group.     

Improved LUT Technique for HPA Nonlinear Pre-Distortion in OFDM Systems

In this paper, we focus on the Look-up Table (LUT) technique for the compensation of HPA nonlinear distortion. An improved LUT method is proposed with better performance compared with conventional LUT technique in terms of convergence speeds, BER and total degradation (TD). It can get over 8 dB gain in out-of-band spectrum re-growth suppression and about 0.3 dB BER performance gain than conventional LUT technique with the same iteration times. Also, we propose an actual application of HPA with pre-distorter in OFDM transmitter. Ai Bo was born in Shannxi Province in China on February 7, 1974. He received a BSc. Degree from Engineering Institute of Armed Police Force in 1997, a Master and Dr. degree from Xidian University in 2002 and 2004 in China respectively, and now working as a post dr. in Dept. of E&E, state of key lab. on microwave and digital communications in Tsinghua University in China. He has once participated in the key research project on HDTV in TEEG (Team of Engineering Expert Group) of China. He is an editorial committee member of journal of “Computer Simulations”, “Information and Electronic Engineering”, an IEEE member and a senior member of Electronics Institute of China (CIE). He has published over 60 scientific papers in his research area till now. His current interests are the research and applications of OFDM techniques with emphasis on synchronization and HPA linearization techniques. Yang Zhi-Xing graduated from Tsinghua University, P.R. China in 1970. He is now a Professor and Deputy Director of State Key Lab. on Microwave and Digital Communication at the Department of Electronic Engineering and the Director of the DTV R&D Center in Tsinghua University. As a DTV technical expert for the Chinese government, Professor Yang has also been a member of the DTV standardization Committee of China and a leader of the DTV Standardization Harmonizing Group in Ministry of Information Industry of China. His major research interests include broadband information transmission technologies and DTV broadcasting systems. Pan Chang-Yong received the B.S. and M.S. degrees from the Department of Electronic Engineering in Tsinghua University, P.R. China, in 1996 and 1999, respectively. He is now an associate professor in the Department of Electronic Engineering and a member of the DTV R&D Center in Tsinghua University. His research interests are in the areas of broadband wireless transmission systems and satellite communications. Zhang Tao-Tao was born in Shandong Province in China in 1982, he received BSc. degree from Tsinghua University in 2004 and now pursing his Master degree in Dept. of E&E, state of key lab. on microwave and digital communications in Tsinghua University in China. His research interests is the power amplifier linearization techniques. Wang Yong was born in Shannxi Province in China in 1976. He received a BSc., a Master and a Dr. Degree from Xidian University in China in 1997, 2002 and 2005, respectively, and now is an associate professor in Xidian University. He has once participated in the key research project on HDTV in TEEG (Team of Engineering Expert Group) in China and is an IEEE Member. His interests are broadband multimedia communications. Ge Jian-Hua was born in September, 1961 in JiangSu Province in China. He received the B.Sc., Master and Ph.D. degree from Xidian University in 1982, 1985 and 1989, respectively. He is now the professor in both Xidian University in Xi’an and Shanghai Jiaotong University in Shanghai. He is the senior member of Chinese Electronics Institute. He has won lots of scientific and technical prizes in China and published many papers. His interests are transmission communications and web security.     

Strategyproof Mechanisms towards Dynamic Topology Formation in Autonomous Networks

In autonomous networks, cooperations among nodes cannot be assumed, since each node is capable of making independent decisions based on their personal preferences. In particular, when a node needs the help of intermediate nodes to relay messages to other nodes, these intermediaries may be reluctant to contribute their network resource for the benefit of others. Ideally, the right amount of incentives should be provided to motivate cooperations among autonomous nodes so that a mutually beneficial network results. In this paper, we leverage the power of mechanism design in microeconomics to design a distributed incentive mechanism that motivates each node towards a more desirable network topology. Since network parameters and constraints change dynamically in reality, the desirable topology can vary over time. Our solution presented in this paper has successfully encompassed such a dynamic nature of the network topology. In addition, we have transformed our solution to an easy-to-implement distributed algorithm, that converges towards the globally optimal topology. Selwyn Yuen obtained his BASc from the University of Waterloo Systems Design Engineering in 2002. He subsequently joined the Department of Electrical and Computer Engineering at the University of Toronto, where he completed his MASc in Computer Engineering in 2004. His Master thesis focuses on applying game theory and mechanism design in peer-to-peer and wireless networks. His other research interests include Artificial Intelligence, Optimization, Network Protocol Design, Distributed Algorithms, Operating Systems, as well as modelling and simulation of the Stock Market. Baochun Li received his B.Engr. degree in 1995 from Department of Computer Science and Technology, Tsinghua University, China, and his M.S. and Ph.D. degrees in 1997 and 2000 from the Department of Computer Science, University of Illinois at Urbana-Champaign. Since 2000, he has been with the Department of Electrical and Computer Engineering at the University of Toronto, where he is currently an Associate Professor and holds the Bell University Laboratories Endowed Chair in Computer Engineering. In 2000, he was the recipient of the IEEE Communications Society Leonard G. Abraham Award in the Field of Communications Systems. His research interests include application-level Quality of Service provisioning, wireless networks, and overlay networks.     

Dose control circuit for digital electrostatic electron-beam array lithography

This paper demonstrates a technique for controlling the electron emission of an array of field emitting vertically aligned carbon nanofibers (VACNFs). An array of carbon nanofibers (CNF) is to be used as the source of electron beams for lithography purposes. This tool is intended to replace the mask in the conventional photolithography process by controlling their charge emission using the “Dose Control Circuitry” (DCC). The large variation in the charge emitted between CNFs grown in identical conditions forced the controller design to be based on fixed dose rather than on fixed time. Compact digital control logic has been designed for controlling the operation of DCC. This system has been implemented in a 0.5 μm CMOS process. Chandra Sekhar A. Durisety received his B.E. (Hons.) Instrumentation from Birla Institute of Technology and Sciences, Pilani, India in 1997 and his M.S in Electrical Engineering from University of Tennessee, Knoxville in 2002. Since 2003, he has been working towards his Ph.D degree also in Electrical Engineering at Integrated Circuits and Systems Lab (ICASL), University of Tennessee, Knoxville. He joined Wipro Infotech Ltd, Global R & D, Bangalore, India in 1997, where he designed FPGA based IPs for network routers. Since 1999, he was involved in the PCI bridge implementation at CMOS chips Inc, Santa Clara, CA, and the test bench development for Sony’s MP3 player, while at Toshiba America Electronic Components Inc., San Jose, CA. His research interests include multi-stage amplifiers, data converters, circuits in SOI and Floating Gate Devices. Rajagopal Vijayaraghavan received the B.E degree in electronics and communication engineering from Madras University in 1998 and the M.S degree in electrical engineering from the University of Texas, Dallas in 2001.He is currently working towards the Ph.D degree in electrical engineering at the University of Tennessee. His research interest is in the area of CMOS Analog and RF IC design. His current research focuses on LNAs and VCOs using SOI based MESFET devices. Lakshmipriya Seshan was born in Trivandrum, India on April 30, 1979. She received her B.tech in Electronincs & Communication Engg from Kerala University, India in June 2000 and M.S in Electrical Engg from University of Tennessee in 2004. In 2004, she joined Intel Corporation as an Analog Engineer, where she is engaged in the design of low power, high speed analog circuits for various I/O interface topologies. Syed K. Islam received his B.Sc. in Electrical and Electronic Engineering from Bangladesh University of Engineering and Technology (BUET) and M.S. and Ph.D. in Electrical and Systems Engineering from the University of Connecticut. He is presently an Associate Professor in the Department of Electrical and Computer Engineering at the University of Tennessee, Knoxville. Dr. Islam is leading the research efforts of the Analog VLSI and Devices Laboratory at the University of Tennessee. His research interests are design, modeling and fabrication of microelectronic/optoelectronic devices, molecular scale electronics and nanotechnology, biomicroelectronics and monolithic sensors. Dr. Islam has numerous publications in technical journals and conference proceedings in the areas of semiconductors devices and circuits. Benjamin J. Blalock received his B.S. degree in electrical engineering from The University of Tennessee, Knoxville, in 1991 and the M.S. and Ph.D. degrees, also in electrical engineering, from the Georgia Institute of Technology, Atlanta, in 1993 and 1996 respectively. He is currently an Assistant Professor in the Department of Electrical and Computer Engineering at The University of Tennessee where he directs the Integrated Circuits and Systems Laboratory (ICASL). His research focus there includes analog IC design for extreme environments (both wide temperature and radiation immune), multi-gate transistors and circuits on SOI, body-driven circuit techniques for ultra low-voltage analog, mixed-signal/mixed-voltage circuit design for systems-on-a-chip, and bio-microelectronics. Dr. Blalock has co-authored over 60 published refereed papers. He has also worked as an analog IC design consultant for Cypress Semiconductor Corp. and Concorde Microsystems Inc.     

Design and implementation of an optimised wireless pressure sensor for biomedical application

This paper presents design and implementation of a wireless pressure sensor system for biomedical application. The system consists of a front-end Micro-Electro- Mechanical System (MEMS) sensing capacitor along with an optimised MEMS-based oscillator for signal conditioning circuit. In this design, vertical fringed comb capacitor is employed due to the advantages of smaller area, higher linearity and larger full scale change in capacitance compared to parallel plate counterparts. The MEMS components are designed in Coventorware design suite and their Verilog-A models are extracted and then imported to Cadence for co-simulation with the CMOS section of the system using AMI 0.6-micron CMOS process. In this paper, an optimisation method to significantly reduce the system power consumption while maintaining the system performance sufficient is also proposed. A phase noise optimisation approach is based on the algorithm to limit the oscillator tail current. Results show that for the pressure range of 0–300 mmHg the device capacitance range of 1.31 pF – 1.98 pF is achieved which results in a frequency sweep of 2.54 GHz – 1.95 GHz. Results also indicate that a 42% reduction of power consumption is achieved when the optimisation algorithm is applied. This characteristic makes the sensor system a better candidate for wireless biomedical applications where power consumption is the major factor. Hai Phuong Le received his B.E. (Hons) degree in Electronic and Computer System Engineering from University of Tasmania, Hobart, Australia in 2000. He received his Ph.D. degree in Microelectronics from Victoria University, Melbourne, Australia in 2005. At present, he is a post-doctoral research fellow and lecturer in the Centre for Telecommunications and Microelectronics, Victoria University. His research and teaching interests include data acquisition system, mixed-signal integrated circuit design and wireless smart sensor systems. Kriyang Shah received his B.E. Degree in Electronics and Communication Engineering from Sardar Patel University, Vallabh Vidyanagar, Gujarat, India and his Master Degree in Microelectronics in 2004. He is currently a Ph.D. research student in the Centre for Telecommunications and Microelectronics, Victoria University, Melbourne, Australia. His research interests include MEMS Sensors, RF MEMS, process integration for MEMS and CMOS and MEMS-CMOS co-simulation. Jugdutt (Jack) Singh received his B.Sc. in Electronics Engineering from University of Brighton, UK and M.Sc. in Electronics Engineering from University of Alberta, Canada in 1978 and 1986 respectively. He completed his Ph.D. at Victoria University, Australia in 1997. Since 1989 he has been at Victoria University, Melbourne, Australia. Currently he is a Professor of Microelectronics in the Centre for Telecommunications and Microelectronics at Victoria University. His major area of research interests are in the RF, analog and mixed signal design, reconfigurable architectures, low power VLSI circuits and systems design. He has published number of articles in education and research in microelectronics and small technologies area. Aladin Zayegh received his B.E. degree in Electrical Engineering from Aleppo University in 1970 and Ph.D. degree from Claude Bernard University, France in 1979. In 1980, he joined the Faculty of Engineering, Tripoli, Libya. Since 1984 he has held lecturing position at Victoria University, Melbourne, Australia. He is currently an Associate Professor and the Head of School in the School of Electrical Engineering, Faculty of Health, Engineering and Engineering and Science at Victoria University. His research interest includes microprocessor-based system, instrumentation, data acquisition and interfacing, and microelectronics.     

Low Cost BIST for Static and Dynamic Testing of ADCs

This paper presents a low cost test method for the static and dynamic characterization of analog-to-digital converters. The method is suitable for implementation in a SoC environment, as a built-in self test (BIST) solution. In the proposed approach, noise is used as the test signal. Theory of operation and practical results demonstrating the effectiveness of the method for INL, DNL, THD and SINAD characterization are presented. The BIST surface overhead caused by the noise generator is only 7.4% of the ADC total area. The reduced number of data samples required allows a reduction of about 7.5× in test time, in comparison to the histogram method.Maria da Gloria Cataldi Flores was born in Santa Maria, Brazil, in 1978. She received the electrical engineering degree in 2000 from Universidade Federal de Santa Maria (UFSM) and the M.S. degree engineering in 2003 from Universidade Federal do Rio Grande do Sul (UFRGS), Brazil. Since then, she has been working as a design engineer in an EAS Supply brazilian company. Her main research interests include mixed-signal and analog testing and digital signal processing.Marcelo Negreiros was born in Porto Alegre, Brazil, in 1969. He received the electrical engineering degree in 1992 and the M.S. degree engineering in 1994, both from Universidade Federal do Rio Grande do Sul (UFRGS), Brazil. Since then he was been working as an associate researcher in the Signal Processing Lab. (LaPSI) of the Electrical Engineering Department at UFRGS. Since 2000 he also works toward a Ph.D. in Computer Science from UFRGS. His main research interests include mixed-signal and analog testing and digital signal processing.Luigi Carro was born in Porto Alegre, Brazil, in 1962. He received the Electrical Engineering and the M.Sc. degrees from Universidade Federal do Rio Grande do Sul (UFRGS), Brazil, in 1985 and 1989, respectively. From 1989 to 1991 he worked at ST-Microelectronics, Agrate, Italy, in the R&D group. In 1996 he received the Ph.D. degree in the area of Computer Science from Universidade Federal do Rio Grande do Sul (UFRGS), Brazil. He is presently a lecturer at the Electrical Engineering Department of UFRGS, in charge of Digital Systems Design and Digital Signal processing disciplines at the graduate and undergraduate level. He is also a member of the Graduation Program in Computer Science of UFRGS, where he is responsible for courses in Embedded Systems, Digital Signal Processing, and VLSI Design. His primary research interests include mixed-signal design, digital signal processing, mixed-signal and analog testing, and fast system prototyping. He has published more than 90 technical papers in those topics and is the author of the book Digital Systems Design and Prototyping (in portuguese).Altamiro A Susin was born in Vacaria-RS, Brazil, in 1945. He received the Electrical Engineering and the MSc. degrees from Universidade Federal do Rio Grande do Sul (UFRGS), Brazil, in 1972 and 1977, respectively. Since 1968 he worked in the start up of Computer Centers of two local Universities. In 1981 he got his Dr. Eng degree from Institut National Polytechnique de Grenoble-France. He is presently a lecturer at the Electrical Engineering Department of UFRGS, in charge of Digital Systems Design disciplines at the graduate and undergraduate level. He is also a member of the Graduation Program in Computer Science of UFRGS, where he is responsible by courses in VLSI Architecture and is also thesis director. His main research interests are Integrated Circuit Architecture, Embedded Systems, Signal Processing with more than 50 technical papers published in those domains. He is/was responsible for several R&D projects either funded with public and/or industry resources.Felipe Ricardo Clayton received the B.S. degree in Electrical Engineering from State University of Campinas (UNICAMP), Brazil, in 1986. He worked at CPqD (Brazilian PTT R&D Center) till 1996 designing analog and mixed signal circuits for telecom and automotive applications. From 1997 to the second half of 1998, he worked at Instituto Superior Técnico (IST), Lisbon, Portugal, under the guidance of Prof. Carlos Azeredo Leme on development of CMOS RF circuits. Since October 1998 he had worked for Motorola SPS. Now he is head of the Power Managment Group at Freescale.Cristiano Benevento received his B.S. degree in Electrical Engineering from Universidade Estadual de Campinas (Unicamp), Brazil, in 1997. He worked at Motorola Cellular Infrastructure Group until August 2000 as a Systems Engineer. He joined Motorola Semiconductor Product Sector in August 2000 as IC Designer for Power Management Group and is now at Freescale.     

A Fast Settling HBT Reference Amplifier for High Speed Digital-to-Analog Converters

This paper proposes a fast settling reference amplifier for use with a current-steering Digital-to-Analog Converter (DAC). The reference amplifier utilizes an open loop architecture, resulting in a bandwidth of 2.5 GHz, small chip area and low power. The wide bandwidth of the reference amplifier is shown to be important for fast settling of DAC current output. The reference amplifier is also able to generate a reference current that tracks fast changes of reference voltage, thus is useful in applications such as multiplying DACs and transversal filters. The proposed design was fabricated using a 1 μm GaAs HBT process. The prototype reference amplifier achieves a temperature coefficient of 92 ppm/°C over a temperature range of 0–100°C and the reference current changes only ±2.14% when the power supply varies ±0.2 V.Yihong Dai received his B.S. and M.Eng. degrees in Electrical Engineering from Shanghai JiaoTong University, Shanghai, China in 1993 and 1996, respectively. From 1996 to 1998, he enjoyed his industrial experiences in Shanghai with semiconductor companies like Shanghai Nortel Semiconductor and Motorola Electronics (China) Shanghai Branch. Since 1998, he has been a research assistant at the Analog and Mixed-signal Laboratory of the Electrical Engineering Department of Brigham Young University working toward his Ph.D. During the summer of 1999, he was with AMI semiconductor Utah Research and Design Center where he developed a threshold voltage based CMOS voltage reference architecture. In the summer of 2001, he was with Ultra Design LLC where he designed a reference amplifier for high speed digital-to-analog converters. His research interest includes voltage reference, reference amplifier and high speed data converters in both CMOS and GaAs processes.Donald T. Comer received the B.S., M.S., and Ph.D. degrees from San Jose State University, the University of California (Berkeley), and the University of Santa Clara, respectively, all in electrical engineering. He began teaching at San Jose State University in 1961 and mixed his teaching and industrial work until he left San Jose State University in 1979. He has worked for California Technical Industries, IBM Corp., Mobility Systems, Precision Monolithics, Storage Technology Corp., and Analog Devices during his career. He founded the AMI Utah Research and Design Center in 1998 that specializes in MOS design. In 2002, Dr. Comer founded Ultra Design, a design center that specializes in high-frequency heterojunction circuit designs. He holds fifteen patents and has published over 50 articles dealing with solid-state and integrated circuits. He has published five textbooks in the field of large-signal and integrated circuits. He formerly held the Quentin Berg Chair at Penn State Harrisburg from 1990 to 1995. He is now a professor of electrical and computer engineering at Brigham Young University where he held the Endowed Chair of Engineering from 1995 to 1998.David J. Comer received the B.S., M.S., and Ph.D. degrees from San Jose State University, the University of California (Berkeley), and Washington State University, respectively, all in electrical engineering. He has worked for IBM Corp., Pacific Electromagnetics, Lawrence Livermore Laboratories, and Intel Corporation. He began his teaching career at the University of Idaho and has taught at the University of Calgary and California State University, Chico. He is presently a professor of electrical and computer engineering at Brigham Young University. He served as Chairman of the Division (Dean) of Engineering at CSU, Chico and as Department Chair at BYU.While at CSU, Chico, Dr. Comer served on the statewide Engineering Liaison Committee and served as Chair of the Council of California State University Deans of Engineering.Dr. Comer has published twelve textbooks and over 60 articles in the field of circuit design. He has contributed sections to the Encyclopedia of Physical Science and Technology and holds seven patents. He was given the Professional Achievement Award at CSU, Chico and was named the Outstanding Teacher of Engineering at BYU. He has also held the College of Engineering Research Chair at Brigham Young University.     

A 1 V switchable CMOS LNA for 802.11A/B WLAN applications

A new dual-band, 2.4 and 5.2 GHz, combined LNA, which can operate at 1 V supply only, for WLAN application is presented. The switched transistor technique is used in the LNA. It could match the input port in two frequency bands and reduce one on-chip spiral inductor usage compared with [1, 2]. Theoretical analysis and transistor level simulation results using 0.18 μm CMOS process from Chartered Semiconductor are presented to demonstrate this idea. Wang-Chi Cheng received his B.Eng., M.Phil., and Ph.D. degrees in Electronic Engineering of the Chinese University of Hong Kong (CUHK) in 1999, 2001 and 2004. His research achievements during M.Phil. and Ph.D. studies were in the field of low voltage receiver front-end circuits design with CMOS technology. He joined the Electrical and Electronic Engineering department of Nanyang Technological University (NTU), Singapore, in May 2005 as a Research Fellow. Now, he is a Senior Engineer in charge of the UWB transceiver IC design in Hong Kong Applied Science and Technology Research Institute (ASTRI). His current research interests include 802.11 A/B WLAN and UWB transceiver design. He is also a paper reviewer of the IEEE Microwave and Wireless Components Letters. Jian-Guo Ma received his B.Sc. and M.Sc. in 1982 and 1988 respectively with honors from Lanzhou university of Chain, and Doctoral Degree in Engineering from Gerhard-Mercator University of Germany in 1996. From Jan. 1982 to March 1991, he has worked with Lanzhou university of China on RF & Microwave Engineering. Before he joined Nanyang Technological University in 1997, he was with Technical University of Nova Scotia, Canada. Now, he is a Professor of the University of Electronic Science and Technology of China. His research interests are: RFIC designs for wireless applications; RF characterization and modeling of semiconductor devices; RF interconnects and packaging; SoC and Applications; EMC/EMI in RFICs. He has published more than 150 technical papers and two books in above mentioned areas. He holds 6 patents in CMOS RFICs. He is now Associate Editor for IEEE Microwave and Wireless Components Letters. Kiat-Seng Yeo received his B.E. (Hons.) (Elect) in 1993, and Ph.D. (Elect. Eng.) in 1996 both from Nanyang Technological University, Singapore. He joined the School of Electrical and Electronic Engineering, Nanyang Technological University, Singapore as a Lecturer in 1996, and became an Assistant Professor and an Associate Professor in 1999 and 2002, respectively. Professor Yeo provides consulting to statutory boards and multinational corporations in the areas of semiconductor devices and electronic circuit design. He has been extensively involved in the modeling and fabrication of small MOS/Bipolar integrated technologies for the last ten years. His research interests also include the design of new circuits and systems (based on scaled technologies) for low-voltage low-power applications; radio frequency integrated circuit (RF IC) design; integrated circuit design of BiCMOS/CMOS multiple-valued logic circuits, domino logic, and memories; and device characterization of deep submicrometer MOSFETs. Manh-Anh Do obtained his B.E. (Hons) (Elect.) in 1973, and Ph.D. (Elect. Eng.) in 1977 both from University of Canterbury, New Zealand. Between 1977 and 1989, he held various positions including: R & D engineer and production manager at Radio Engineering Ltd., research scientist at Fisheries Research Centre, New Zealand, and senior lecturer at National University of Singapore. He joined the School of Electrical and Electronic Engineering, Nanyang Technological University (NTU), Singapore as a senior lecturer in 1989, and obtained the Associate Professorship in 1996 and the Professorship in 2001. He has been a consultant for many projects in the Singapore electronic industry, and was the principal consultant for the design, testing and implementation of the $200 million Electronic Road Pricing (ERP) island-wide project in Singapore, from 1990 to 2001. His current research is on digital and mobile communications, RF IC design, mixed-signal circuits and intelligent transport systems. Before that, he specialsed in sonar designing, biomedical engineering and signal processing. Since 1995, he has been Head of Division of Circuits and Systems, School of EEE, NTU. He is a Fellow of IEE, UK, a Chartered Engineer (UK) and a Professional Engineer (Singapore).     

Layout preferences concerning matching in a fully differential ΔΣ modulator design

A fully differential architecture has numerous advantages in a switched-capacitor delta-sigma modulator such as immunization to clock-induced noise, supply rejection, simple sign conversion of integrator gain and doubled output dynamic range. Efficient use of the fully differential architecture nevertheless requires a completely symmetrical layout and routing, which may contradict with the requirements of component matching. Some design choices have to be made at this point, depending on what requirements can be compromised. This paper discusses the importance of certain layout features which may serve as a guide in making these design choices. Hakan Binici was born in Istanbul, Turkey, in 1969. He received his B.Sc. and M.Sc. degrees respectively from Istanbul Technical University and the Bogazici University in Istanbul in 1989 and 1995. Since 1997 he has been working as a research scientist at the Electronics Laboratory of the University of Oulu in Finland. He is currently continuing his research towards a Ph.D. His research interests focus on low-voltage, low-power analog VLSI systems and ΔΣ modulators. Juha Kostamovaara received the degrees of Dipl. Eng, Licentiate of Tech. and Doctor of Tech. in electrical engineering in 1980, 1982 and 1987, respectively, all from the University of Oulu, Finland. He was Acting Associate Professor of Electronics in the Department of Electrical Engineering at the University of Oulu in 1987–1993, and was nominated Associate Professor from the beginning of 1993. During 1994 he worked as an Alexander von Humboldt Scholar at the Technical University of Darmstadt, Germany. In 1995 he was invited to become full Professor of Electronics at the University of Oulu, where he is currently also head of the Electronics Laboratory. Prof. Kostamovaara's main interest is in the development of high-speed electronic circuits and systems and their applications in electronic and optoelectronic measurements and radio mobile telecommunications. An erratum to this article can be found at     

Analog behavioral modeling by multi-companding and wavelet collocation method

In this paper, we develop a wavelet collocation method with multi-companding for behavioral modeling of analog circuits. In the multi-companding procedure, the nonlinear companding algorithm is developed to control the error distribution continuously, while the adaptive scheme is employed to reduce the number of used wavelets. Consequently, the proposed multi-companding algorithm can not only modify the modeling error distribution continuously but also decrease the number of basis functions efficiently. Moreover, the companding function generation is automatic and can be applied for the behavioral modeling of any analog circuits. Jun Tao received the B.S degree in electrical engineering from Fudan University, China, in 2002. Now she is currently working toward the Ph.D. degree in micro-electronic engineering at the Fudan University. Her research interest includes analog behavioral modeling, analog circuit simulation and DFM. Xuan Zeng (M97) received the B.Sc. and Ph.D. degrees in electrical engineering from Fudan University, Shanghai, China, in 1991 and 1997, respectively. She joined the Electrical Engineering Department, Fudan University in 1997 and became a full professor in Microelectronics Department in 2001. Now she serves as the Vice Director of ASIC & System State key Lab. and the Associate Head of Microelectronics Department Fudan University. She was a visiting professor in the Electrical Engineering Department, Texas A&M University, USA and Microelectronics Department of TU Delft, Netherland in 2002 and 2003 respectively. Her research interests include DFM, analog and mixed signal design automation (behavioral modeling, circuit simulation and analog layout generation), high speed interconnect analysis and design and ASIC design. Dr. Zeng received the Cross-Century Outstanding Scholar Award from the Ministry of Education of China in 2002. She was selected into “IT Top 10” in Shanghai China in 2003. She served in the technical program committee of IEEE/ACM ASP-DAC in 2000 and 2005. Dian Zhou received the B.S degree in physics and M.S degree in electrical engineering from Fudan University, China, in 1982 and 1985, respectively, and the Ph.D. degree in electrical and computer engineering from the University of Illinois in 1990. He joined the University of North Carolina at Charlotte as an assistant professor in 1990, where he became an associate professor in 1995. He joined the University of Texas at Dallas as a full professor in 1999, and joined Fudan university as a Changjiang Professor in 2003 (on-leave from the University of Texas at Dallas). Currently, he serves as the dean of Microelectronics School, director of National Key Lab. on ASICs and Systems, and director of Miro-nano-electronics Innovation Platform at Fudan University. His research interests include: High-speed VLSI systems, CAD tools, mixed-signal ICs, and algorithms. Charles Chiang received his Bachelor degrees from the Department of Political Science, Tunghai University at Taichung, Taiwan in 1980, and Department of Computer Science, New Mexico State University, Las Cruces, New Mexico in 1986. Then he had his Masters and Ph.D. degree from the Department of Electrical Engineering and Computer Science, Northwestern University, Illinois in 1988 and 1991, respectively. After working at IBM and EDA companies for 10 years, he joined the Advanced Technology Group at Synopsys, Inc. in 2001. His research interests include routing, placement, floorplan, and signal integrity. His main research focus is now on design for manufacturability (DFM). Dr. Chiang has been a Senior Member of IEEE since 1998. He received the Superior Design Recognition award and the ADAL award from IBM Rochester in 1993 and 1994, respectively. He is one of the top 15 winners with new patent filing in 2005 and 2006 in Synopsys. He has served on the technical committee of ICCAD from 2004 to 2006, on that of Field Programming Logic (FPL) from 2002 to 2003, as well as on the committee of ASP-DAC in 2007. He has published more than 40 technical papers and filed 10 US patents.     

A low-power, second-order Δ/Σ modulator using a single class-AB op-amp for voice-band applications

The design of a power-efficient second-order Δ/Σ modulator for voice-band is presented. At system level, a new single-loop, single-stage modulator is proposed. The modulator employs only one class-AB op-amp to realize a second-order noise shaping for voice-band applications. The modulator is designed in a 0.25μm standard CMOS process, and exhibits 86 dB dynamic range (DR) for a 4 kHz voice-bandwidth. The proposed modulator consumes 125μW from a 2.5 V supply. Aminghasem Safarian received the B.S. and M.S. degrees in electrical engineering from the Sharif University of Technology, in 2000, 2002, respectively. Since 2003 he is a research assistant at University of California, Irvine, working toward his Ph.D. degree in electrical engineering emphasizing on RF IC design for wireless communication systems. During the summer of 2005, he was with Broadcom Corporation, Irvine, CA, where he developed integrated receivers for RFID and WCDMA applications. Farzad Sahandiesfanjani was born in Tabriz, Iran in 1976. He received the B.S. and M.S. degrees in electronics from Sharif University of Technology, Tehran, Iran, in 1998 and 2000, respectively. The subject of his thesis was the design of 4th order cascade delta-sigma modulator for ADSL Analog Front End. From 1998 to 2003, he was with Emad Semicon Co., Tehran, Iran, where he designed circuits for voice application such as CODEC and SLIC chip. He also designed a 3rd order single loop class-D delta-sigma modulator for audio application. He joined Tripath Technology Inc., San Jose, CA, in 2003 and has been working on the design of analog and mixed-signal circuits for class-T audio power amplifier. He is also author of one patent for inductor-less switching audio power amplifier and also co-author of 3 more pending patents and 4 papers. Payam Heydari (S'98–M'00) received the B.S. and M.S. degrees (with honors) in electrical engineering from the Sharif University of Technology, in 1992, 1995, respectively. He received the Ph.D. degree in electrical engineering from the University of Southern California, in 2001. During the summer of 1997, he was with Bell-Labs, Lucent Technologies, Murray Hill, NJ, where he worked on noise analysis in deep submicron very large-scale integrated (VLSI) circuits. During the summer of 1998, he was with IBM T. J. Watson Research Center, Yorktown Heights, NY, where he worked on gradient-based optimization and sensitivity analysis of custom-integrated circuits. Since August 2001, he has been an Assistant Professor of Electrical Engineering at the University of California, Irvine, where his research interest is the design of high-speed analog, radio-frequency (RF), and mixed-signal integrated circuits. Dr. Heydari has received the 2005 National Science Foundation (NSF) CAREER Award, the 2005 IEEE Circuits and Systems Society Darlington Award, the 2005 Henry Samueli School of Engineering Teaching Excellence Award, the Best Paper Award at the 2000 IEEE International Conference on Computer Design (ICCD), the 2000 Honorable Award from the Department of EE-Systems at the University of Southern California, and the 2001 Technical Excellence Award in the area of Electrical Engineering from the Association of Professors and Scholars of Iranian Heritage (APSIH). He was recognized as the 2004 Outstanding Faculty at the EECS Department of the University of California, Irvine. His name was included in the 2006 Who's Who in America. Dr. Heydari is an Associate Editor of the IEEE TRANSACTIONS ON CIRCUITS AND SYSTEMS—part I. He currently serves on the Technical Program Committees of Custom Integrated Circuits Conference (CICC), International Symposium on Low-Power Electronics and Design (ISLPED), International Symposium on Quality Electronic Design (ISQED), and the Local Arrangement Chair of the ISLPED conference. He was the Student Design Contest Judge for the DAC/ISSCC Design Contest Award in 2003, the Technical Program Committee member of the IEEE Design and Test in Europe (DATE) from 2003 to 2004, and International Symposium on Physical Design (ISPD) in 2003. Mojtaba Atarodi received his Ph.D degree from USC (the University of Southern California, Los Angeles), in electrical engineering Electro-physics in 1993, his M.S from University of California at Irvine, and his B.SEE from the Tehran Polytechnic University with first Grade honor. Following his Ph.D completion, he was with Linear Technology Corporation from 1993 to 1996 as an analog design engineer. He has been with Sharif University of Technology as an Assistant and Visiting Professor since 1997. The Author of more than 50 technical journal and conference papers an a book on Analog CMOS IC Design, Dr Atarodi’s main research interests are analog and RF IC system, circuit, and signal processing design as well as analog synthesis tools. Having held several management and consulting positions during the last 15 years in the US industry, he holds one US patent in analog highly linear tunable Operational Transconductance Amplifiers and has applied for 5 more US patents as well.     

Characteristic Investigation of New Pathological Elements

A characteristic investigation of the new pathological elements (i.e voltage mirror and current mirror) has been presented. Many nullor-mirror equivalences are explored. The circuit cascadability is discussed with nullor and mirror concepts. Also, the conventional inverse network transformation has been extended for applying to the circuits with current mirror output. To demonstrate the use of presented properties, practical examples have been given. The derived circuits have been verified with HSPICE simulation and the simulation results confirm with our theoretical prediction.Hung-Yu Wang was born in Kaohsiung, Taiwan, Republic of China, on January 4, 1969. He received the Ph.D. degree in optical sciences from National Central University, Chung-Li, Taiwan in 2002.Since 1993 he has worked on promoting the prototyping IC implementation of academic researches, and propelling the collaboration of the academia and industries in Chip Implementation Center (CIC), National Science Council of the Republic of China. In 2003 he became a researcher and the deputy director in Division of Chip Implementation Service of CIC. He is currently working on South Region Office of National Chip Implementation Center, National Applied Research Laboratories as a researcher and the department manager. His research interests are in current-mode circuits design, analog IC design and analog IP design.Ching-Ting Lee was born in Taoyuan, Taiwan, R.O.C., on November 1, 1949. He received his B.S. and M.S. in Electrical Engineering Department of the National Cheng-Kung University, Taiwan, in 1972 and 1974, respectively. He received Ph.D. degree in Electrical Engineering Department from the Carnegie-Mellon University, Pittsburgh, PA, in 1982.He worked on Chung Shan Institute of Science and Technology, before he joined the Institute of Optical Sciences, National Central University, Chung-Li, Taiwan, as a Professor in 1990. He works on National Cheng-Kung University as the dean of Electrical Engineering and Computer Science and the professor or the Institute of Microelectronics, Department of Electrical Engineering in 2003. His current research interests include theory, design, and application of guided-wave structures and devices for integrated optics and waveguide lasers. His research activities have also involved in the research concerning semiconductor lasers, photodetectors and high-speed electronic devices, and their associated integration for electrooptical integrated circuits. He received the outstanding Research Professor Fellowship from the National Science Council (NSC), R.O.C. in 2000 and 2002. He also received the Optical Engineering Medal from Optical Engineering Society and Distinguish Electrical Engineering professor award from Chinese Institute of Electrical Engineering Society in 2003.Chun-Yueh Huang was born in Taichung, Taiwan, Republic of China, on March 24, 1967. He received the B.S. degree in industrial education from National Chang Hwa Normal University, Chang Hwa, Taiwan in 1991, M.S. and Ph.D. degrees both in electrical engineering from the National Cheng Kung University, Tainan, Taiwan in 1993 and 1997, respectively. Since 1999 he has been with the Kan Shan University of Technology, where he is currently Associate Professor and Chairman of Department of Electronic Engineering. His biography is included in the 7th Edition (2003–2004) of Who’s Who in Science and Engineering.His current researches include current-mode circuits design, VLSI design, analog IC design and analog IP design.     

Voltage-Mode Universal Biquadratic Filters with One Input and Five Outputs

Four new voltage-mode universal biquadratic filters each with one input terminal and five output terminals are presented. Each of the first two proposed circuits uses four plus-type second-generation current conveyors, two grounded capacitors and five resistors. The third proposed circuit employs two plus-type second-generation current conveyors, one differential voltage current conveyor, two grounded capacitors and five resistors. The fourth proposed circuit employs two multi-output second-generation current conveyors, two grounded capacitors and five resistors. Each of the proposed circuits can realize all the standard filter functions; highpass, bandpass, lowpass, notch and allpass, simultaneously, without changing the passive elements. The proposed circuits enjoy the features of orthogonal controllable of resonance angular frequencies and quality factors, using only grounded capacitors as well as low active and passive sensitivities. Jiun-Wei Horng was born in Tainan, Taiwan, Republic of China, in 1971. He received the B.S. degree in Electronic Engineering from Chung Yuan Christian University, Chung-Li, in 1993, and the Ph.D. degree from National Taiwan University, Taipei, in 1997. From 1997 to 1999, he served as a Second-Lieutenant in China Army Force. From 1999 to 2000, he joined CHROMA ATE INC. where he worked in the area of video pattern generator technologies. From 2000 to 2005, he joined the Department of Electronic Engineering, Chung Yuan Christian University, Chung-Li, Taiwan as an Assistant Professor. Since 2005, he is an Associate Professor. His teaching and research interests are in the areas of Circuits and Systems, Analog and Digital Electronics, Active Filter Design and Current-Mode Signal Processing. Chun-Li Hou was born in Taipei, Taiwan, Republic of China, in 1951. He received the B.S. degree, M.S. degree, and Ph.D. degree in Electrical Engineering from National Taiwan University, Taipei, in 1974, 1976, and 1991, respectively. From 1977 to 1979, he taught as a lecture in Tamkang College. From 1981 to 1991, he taught as a lecture in the department of Electronic Engineering, Chung-Yuan Christian University, Chung, Taiwan. From 1992 until now, he taught there as an Associate Professor. His teaching and research interests are in the areas of Current-Mode Analog Circuit Analysis and Design, Active Network Synthesis Circuit theory and Applications. Chun-Ming Chang obtained his bachelor and master degrees, both in the field of electrical engineering, from National Cheng Kung University, Tainan, Taiwan, R.O. China, and his Ph.D. degree in the field of electronics and computer science from the University of Southampton, U.K. He had been an associate professor in Chung Yuan Christian University in Taiwan from 1985 to 1991, and has been a full professor in the same University since 1991. His research interest is divided by two relative fields, network synthesis before 1991 and analog circuit design after 1991. He had been a chairman of the electrical engineering department in Chung Yuan Christian University from 1995 to 1999. Recently, he was recommended for inclusion in The Contemporary Who's Who of Professionals 2004 Edition, and nominated by the Governing Board of Editors of the American Biographical Institute for the prestigious title MAN OF THE YEAR-2005, and became an Advisor of the ABI's distinguished RESEARCH BOARD OF ADVISORS due to the invention of Analytical Synthesis Method and OTA-Only-Without-C Circuits in the field of analog circuit design. Wen-Yaw Chung was born in Hsin-Chu, Taiwan, R.O.C., 1957. He received the B.S.E.E. and M.S. degrees from Chung Yuan Christian University, Chung Li, Taiwan, in 1979 and 1981 respectively, and the Ph.D. degree in Electrical and Computer Engineering from Mississippi State University, USA, in 1989. Subsequently, he joined the Advanced Microelectronics Division, Institute for Technology Development in Mississippi, where he was involved in the design of a bipolar optical data receiver. In 1990 he worked as a design manager for the Communication Product Division, United Microelectronics Corporation, Hsin-Chu, where he was involved in the design of analog CMOS data communication integrated circuits. Since 1991 he has been an Associate Professor in the Department of Electronic Engineering at Chung Yuan Christian University. His research interests include mixed-signal VLSI design, biomedical IC applications, sensor and actuator interfacing for deep submicron VLSI electronics.     

A Prototype Bandpass Sigma-Delta Modulator Employing Crystal Resonator

This paper describes an initial work on a second-order bandpass Sigma-delta modulator employing crystal resonator. The aim of this work is to explore the possibilities of realizing bandpass sigma-delta modulator using non-electronic resonators, such as micro-mechanical resonators. The initial study is based on crystal resonators as they have similar characteristics as the other types of resonator and are readily available. In order to obtain the desired loop transfer function, a compensation circuit is proposed to cancel the anti-resonance in the crystal resonator. The modulator chip is fabricated in a 0.6-μ m CMOS process. The bandpass noise shaping is demonstrated in the experiment with a 1- and 8-MHz crystal resonator, respectively. Yong Ping Xu graduated from Nanjing University, P.R. China in 1977. He received his Ph.D. from University of New South Wales (UNSW) Australia, in 1994. From 1978 to 1987, he was with Qingdao Semiconductor Research Institute, P.R.China, initially as an IC design engineer, and later the deputy R&D manager and the Director. From 1993 to 1995, he worked on an industry collaboration project with GEC Marconi, Sydney, Australia, at the same university, involved in design of sigma-delta ADCs. He was a lecturer at University of South Australia, Adelaide, Australia from 1996 to 1998. He has been with the Department of Electrical and Computer Engineering, National University of Singapore since June 1998 and is now an Associate Professor. His general research interests are in the areas of mixed-signal and RF integrated circuits, and integrated MEMS and sensing systems. He is a Senior Member of IEEE. Xiaofeng Wang was born in Shangqiu, China, in 1980. He received B.Eng. degree from Northwestern Polytechnical University, Xi'an, China, in 2000 and M. Eng. degree from National University of Singapore, Singapore, in 2003, both in electrical engineering. He is currently working toward the Ph.D. degree at Tufts University, Medford, USA. His research is on high speed ADC design. Wai Hoong Sun was born in Taiping, Malaysia in 1976. He received the B. App. Sc. (Honours) degree in electrical engineering from the University of Toronto, Canada in 1999. After graduating, he joined Sharp Electronics Singapore as an R&D Engineer where he was involved in FPGA and digital IC design of display related circuits. In 2001 and 2002, he did full time research in the National University of Singapore on bandpass sigma-delta modulators. During that period, he was also a Graduate Tutor in electronics for second year electrical and computer engineering students. He then joined Philips Electronics Singapore in 2002 as a Lead Engineer. He did board-level designs for LCD and plasma televisions. He was also development project leader for a project that was successful in bringing to the market a range of LCD and plasma televisions. Currently, he is a Hardware Architect where he is responsible for the system-level electrical design of the television board.     

A time-to-first spike CMOS image sensor with coarse temporal sampling

Conventional voltage-based CMOS image sensors inherently have a dynamic range of about 60 dB. To extend the dynamic range, a two-degree of freedom time-based CMOS image sensor is proposed. Instead of reading analog voltages off chip, a time representation is used to record when the photodetector voltage passes a timing-varying threshold. The time measurements are combined with the reference voltage waveform to reconstruct the image. Experimental results on a prototype 32 × 32 pixel array CMOS image sensor verify that the two-degree of freedom sampling technique is feasible for ultra-wide dynamic range imaging. A measured 115 dB dynamic range at 30 fps is obtained. Qiang Luo received the B.S. (with honor) and M.S. degrees in electrical engineering from Fudan University, Shanghai, China, in 1995 and 1998, respectively, and the Ph.D. degree in electrical engineering from University of Florida, Gainesville, FL, in 2002. In 2001, he was with Texas Instruments Inc., Dallas, TX, where he was an intern engineer working on ultra-wide dynamic range CMOS image sensors. From 2002 to 2004, he was with National Semiconductor Corporation, Santa Clara, CA, where he was a staff circuit design engineer and worked on the design of high performance CMOS image sensors. He is currently with the Marvell Semiconductor Inc, Sunnyvale, CA, where he is working on the development of advanced DVD servo IC. His research interests include high-speed mixed-signal IC design, CMOS image sensors, DVD servo IC and device physics. Dr. John G. Harris received his BS and MS degrees in Electrical Engineering from MIT in 1983 and 1986. He earned his PhD from Caltech in the interdisciplinary Computation and Neural Systems program in 1991. After a two-year postdoc at the MIT AI lab, Dr Harris joined the Electrical and Computer Engineering Department at the University of Florida (UF). He is currently an associate professor and leads the Hybrid Signal Processing Group in researching biologically-inspired circuits, architectures and algorithms for signal processing. Dr. Harris has published over 100 research papers and patents in this area. He co-directs the Computational NeuroEngineering Lab and has a joint appointment in the Biomedical Engineering Department at UF. Zhiliang J. Chen received Ph.D. degree in electrical engineering from University of Florida in 1994. From 1994 to 2004, he was with Texas Instruments where he worked as Senior Member of Technical Staff and Design Branch Manager. In 2002 he was expatriated to COMMIT, a Texas Instruments JV company in China, as director of RF & Analog Base Band department. In 2004, he left Texas Instrument and found On-Bright (Shanghai) Corporation where he serves as president of the company. Dr. Chen currently held 22 US patents and has published morn than 10 journal papers. He was a recipient of the Best Paper Award from the 1997 ESD/EOS symposium.     

A new pipelined analog-to-digital converter using current conveyors

A new pipelined analog-to-digital converter (ADC) using second-generation current conveyor (CCII) is presented. Two main building blocks of the pipelined ADC, sample-and-hold (S/H) circuit and multiplying digital-to-analog converter (MDAC) are constructed of CCII instead of operational amplifier (OA). Experimental results show that the proposed CCII-based pipelined ADC can work at 12.5 MHz with a 7.3-bit resolution. The DNL is within −0.4 LSB and 0.4 LSB and INL is within −0.8 LSB and 0.8 LSB, respectively. The pipelined ADC is realized in TSMC 0.35 μm CMOS technology and consumes 29 mW under a 3.3 V power supply. The core size is 0.85×0.85 mm². Sing-Yen Wu received the M.S. degree in the Department of Electronic Engineering from National Taipei University of Technology, Taipei, Taiwan, in 2005. His current research interests include CMOS pipelined analog-to-digital converters and mixed-signal integrated circuit. Lu-Po Liao received the M.S. degree in the Department of Electronic Engineering from National Taipei University of Technology, Taipei, Taiwan, in 2003. His current research interests include analog integrated circuit design and mixed-signal integrated circuit design. Chia-Chun Tsai received the Ph.D. degrees in Electrical Engineering from National Taiwan University, Taipei, Taiwan, 1991. From 1989 to 2005, he served at the Department of Electronic Engineering, National Taipei University of Technology, Taipei, Taiwan. Since 2005 he has been with the Department of Computer Science and Information Engineering, Nanhua University, Chiayi, Taiwan, where he is a Full Professor. His current research interests include VLSI design automation and mixed-signal IC designs.